|
| 1 |
Development of a Numerical Algorithm for the Evaluation of Aerodynamic Driving Stability of a Vehicle
Kim, Chul-Ho;Kim, Chang-Sun;Lee, Seung-Hyun;
/
The Korean Society of Automotive Engineers
, v.24, no.3, pp.265-272,
|
|
| 2 |
Quasi-static Analysis of Vehicle Seatbelt Using Analysis of Variance and Improvement of Tensile Test Correlation
Lee, Kwangseop;Eo, Youngwoo;Kim, Samsung;Kim, Dooyong;Song, Taeckrim;Lee, Kyeongsang;
/
The Korean Society of Automotive Engineers
, v.24, no.3, pp.273-278,
|
|
| 3 |
Robust Design of Crankshaft
Lee, Seungwoo;Yang, Chulho;
/
The Korean Society of Automotive Engineers
, v.24, no.3, pp.279-284,
|
|
| 4 |
A Study on Durability Characteristics for Plungers of Conventional Ceramic and Surface Modification by Powder Coating Using High Velocity Oxygen Fuel Thermal Spray
Bae, Myung-whan;Park, Byoung-ho;Jung, Hwa;
/
The Korean Society of Automotive Engineers
, v.24, no.3, pp.285-293,
|
|
| 5 |
Dynamic Performance Analyzing of In-wheel Vehicle considering the Real Driving Conditions and Development of Derivation System for Applying Dynamometer Using Drive Motor's Dynamic Load Torque
Son, Seungwan;Kim, Kiyoung;Cha, Suk Won;Lim, Won Sik;Kim, Jungyun;
/
The Korean Society of Automotive Engineers
, v.24, no.3, pp.294-301,
|
|
| 6 |
A Study of NH3 Adsorption/Desorption Characteristics and Model Based Control in the Urea-SCR System
Ham, Yunyoung;Park, Suyeol;
/
The Korean Society of Automotive Engineers
, v.24, no.3, pp.302-309,
|
|
| 7 |
A Study on Lateral Tire-road Friction Coefficient Estimation Using Tire Pneumatic Trail Information
Han, Kyoungseok;Choi, Seibum;
/
The Korean Society of Automotive Engineers
, v.24, no.3, pp.310-318,
|
|
| 8 |
Development of the Calibration Method for the Boost Pressure and EGR Rate of a WGT Diesel Engine Using Mean Value Model
Chung, Jaewoo;Kim, Namho;Lim, Changhyun;Kim, Deokjin;Kim, Kiyong;
/
The Korean Society of Automotive Engineers
, v.24, no.3, pp.319-329,
|
|
| 9 |
Component Sizing for Development of Novel PHEV System
Lee, Heeyun;Kang, Changbeom;Kim, Jinseong;Cha, Suk Won;Park, Yeong-il;
/
The Korean Society of Automotive Engineers
, v.24, no.3, pp.330-337,
|
|
| 10 |
An Analytical Study by Variation of Die and Plug Angle in Drawing Process for the Strength Optimization of Ultra High Pressure Common Rail Fuel Injection Tube Raw Material
Ahn, Seoyeon;Park, Jungkwon;Kim, Yonggyeom;Won, Jongphil;Kim, Hyunsoo;Kang, Insan;
/
The Korean Society of Automotive Engineers
, v.24, no.3, pp.338-344,
|
|
| 11 |
Determination of an LNT Regeneration Condition Based on a NOx Storage Fraction in a 2.2L Direct Injection Diesel Engine
Chun, Bongsu;Lee, Jungwoo;Han, Manbae;
/
The Korean Society of Automotive Engineers
, v.24, no.3, pp.345-351,
|
|
| 12 |
A Study on the Safety Performance of the Air Chamber TMA through Accident Analysis
Jo, Huichang;Park, Insong;
/
The Korean Society of Automotive Engineers
, v.24, no.3, pp.352-357,
|
|
| 13 |
A Study on the Combustion and Exhaust Emission Characteristics with the Variations of Mixing and Air-fuel Ratio of Bio-ethanol - Gasoline in a SI Engine
Yoon, Seunghyun;Ha, Sungyong;
/
The Korean Society of Automotive Engineers
, v.24, no.3, pp.358-364,
|
|
| 14 |
Development of Clamping Force Estimation Algorithm and Clamp-force Sensor Calibration on Electromechanical Brake Systems
Park, Giseo;Choi, Seibum;Hyun, Dongyoon;
/
The Korean Society of Automotive Engineers
, v.24, no.3, pp.365-371,
|
|
| 15 |
A Study on the Speed-based Active Compensation of the Kiss-Point of Dry-type Clutch Equipped with Automated Manual Transmission
Choi, Woo-Seok;Lee, Kyo-Bum;Lim, Wonsik;
/
The Korean Society of Automotive Engineers
, v.24, no.3, pp.372-378,
|
|