|
1 |
Fatigue Cumulative Damage and Life Prediction of Uncovered Freight Car Under Service Load using Rainflow Counting Method
Baek, Seok-Heum;Lee, Kyoung-Young;Mun, Sung-Jun;Cho, Seok-Swoo;Joo, Won-Sik;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.1-9,
|
|
2 |
Study for the Cooling Performance Improvement of a Mini Bus
Lyu, Myung-Seok;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.10-15,
|
|
3 |
A Study on the Performance Improvement in the Intake System of a Large-sized Commercial Bus
Lyu, Myung-Seok;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.16-21,
|
|
4 |
A Study on Combustion Characteristics of Pre-mixed -air by Flame Trap
Kim, Deok-Ho;Lee, Jai-Hyo;Choi, Su-Jin;Cho, Gyu-Back;Jeong, Dong-Soo;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.22-28,
|
|
5 |
Correlation between Subjective and Objective Assessments of Shock Signals Excited on a Vehicle Passing Bumps
Yoo, Wan-Suk;Kim, Min-Seok;Jang, Han-Kee;Ahn, Se-Jin;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.29-36,
|
|
6 |
Development of A Haptic Steering System for a Low Cost Vehicle Simulator using Proving Ground Test Data
Kim, Sung-Soo;Jeong, Sang-Yoon;Lee, Chang-Ho;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.37-43,
|
|
7 |
A Study on the Characteristics of Direct Injection Spark Ignition Engine using a Liquefied Petroleum Gas Fuel
Lee, Min-Ho;Jeong, Dong-Soo;Cha, Kyung-Ok;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.44-51,
|
|
8 |
A Study on Prediction of Flow Characteristics and Performance of a Heavy-Duty Diesel Engine with Continuously Regenerating Method PM Reduction
Han, Young-Chool;Moon, Byung-Chul;Oh, Sang-Ki;Baik, Doo-Sung;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.52-57,
|
|
9 |
Development of an Infinite Element for Impact Problem using ABAQUS UEL
Yang, Seung-Yong;Goo, Byeong-Choon;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.58-64,
|
|
10 |
A Simultaneous Reduction of Smoke and with Biodiesel Fuel in a D. I. Diesel Engine
Choi, Seung-Hun;Oh, Young-Taig;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.65-71,
|
|
11 |
A Study on the Optimum Design of Warm-up rate in a Air-Heated Heater System by Using CFD Analysis and Taguchi Method
Kim, Min-Ho;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.72-82,
|
|
12 |
A Study on Characterization for Stacking Fault Evaluation of CFRP Composite Laminates Using an EMAT Ultrasonics
Im, Kwang-Hee;Na, Seung-Woo;Kim, Ji-Hoon;Lee, Chang-Ro;Hsu, David K.;Yang, In-Young;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.83-92,
|
|
13 |
Modeling and Injection Rate Estimation of a Piezo Injector for CRDI Diesel Engines
Kim, Sun-Woo;Chung, Nam-Hoon;SunWoo, Myoung-Ho;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.93-100,
|
|
14 |
Optimization of Heavy-Duty Diesel Engine Operating Parameters Using Micro-Genetic Algorithms
Kim, Man-Shik;Liechty, Mike P.;Reitz, Rolf D.;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.101-107,
|
|
15 |
A Study on Characteristics of Damageability and Repairability with Similar Platform Type at Low Speed 40% Offset Crash Test
Lim, Jong-Hun;Park, In-Song;Heo, Seung-Jin;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.108-113,
|
|
16 |
A Study on the Performance for Heavy-duty Diesel Engine with Intake Air Filter
Rha, Wan-Yong;Oh, Sang-Ki;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.114-117,
|
|
17 |
Cutting Characteristics of Quartz by Abrasive Waterjet
Chung, Nam-Yong;Jin, Yun-Ho;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.118-126,
|
|
18 |
High Speed Tensile Tests of Steel Sheets for an Auto-body at the Intermediate Strain Rate
Lim, Ji-Ho;Kim, Seok-Bong;Kim, Jin-Sung;Huh, Hoon;Lim, Jong-Dae;Park, Sung-Ho;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.127-134,
|
|
19 |
Catalytic Reduction of Nitric Oxide in Oxygen-Rich Exhaust with Methanol over Catalysts
Kim, Sang-Hwan;Yoo, Hyun-Ju;Park, Jung-Kyu;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.135-141,
|
|
20 |
Analysis of Stress Singularities on Interfaces of Friction Welded Dissimilar Materials
Chung, Nam-Yong;Park, Chul-Hee;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.142-148,
|
|
21 |
Development of the VR Simulation System for the Study of Driver's Perceptive Response
Jang, Suk;Kwon, Seong-Jin;Chun, Jee-Hoon;Cho, Ki-Yong;Suh, Myung-Won;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.149-156,
|
|
22 |
Casestudy on Bumper Stay for Damageability & Repairability Improvement
Chun, Young-Bum;Lee, Chong-Won;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.157-161,
|
|
23 |
A Study on the Manufacturing DMU for Automotive General Assembly
Kim, Gun-Yeon;Lee, Kang-Kul;Heo, Jun;Park, Tae-Keun;Noh, Sang-Do;Kim, Jung-Ho;Kim, Dong-Wook;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.162-169,
|
|
24 |
A Study on the Stability of Rich/Lean Methane Premixed Flame
Lee, Won-Nam;Seo, Dong-Kyu;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.170-177,
|
|
25 |
Soot and PAH Formation Characteristic of Concentric Co-Flow Diffusion Flames
Lee, Won-Nam;Nam, Youn-Woo;
/
The Korean Society of Automotive Engineers
, v.13, no.2, pp.178-185,
|
|