|
1 |
Spray Characteristics of High Pressure Gasoline Swirl Injector with Various Cross-flow Speeds
Choi Jaejoon;Lee Youngseok;Choi Wook;Bae Choongsik;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.1-8,
|
|
2 |
An Experimental Study on the Flow Characteristics and the Stratification Effects in Visualization Engine Using the DPIV and the Entropy Analysis
Lee Changhee;Lee Kihyung;Lee Changsik;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.9-18,
|
|
3 |
An Experimental Study on the Spray Behaviors of Swirl and Slit Injector to Direct Injection Spark Injection Engine
Lee Changhee;Lee Kihyung;Choi Youngjong;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.19-27,
|
|
4 |
Various Injection Conditions and Fuel Control of an LPG Liquid Injection Engine
Sim Hansub;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.28-35,
|
|
5 |
Estimation of the Rubber Material Property by Successive Zooming Genetic Algorithm
Kwon Youngdoo;Kim Jaeyong;Lee Jaekwan;Kwon Hyunwook;Han Insik;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.36-44,
|
|
6 |
Contact Stress Analysis of Stick Type Ignition Coil Jacket PBT
Kim Yangsul;Kim Namsu;Lee Jongseok;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.45-50,
|
|
7 |
A Study on the Co-flow Diffusion Flame Temperature Measurement at Various Fuel Flows Rate Using the Rapid Insertion Technique
Han Yongtaek;Lee Kihyung;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.51-59,
|
|
8 |
A Study on Characteristics of Mild Combustion using the Radiative Flamelet Model
Kim Gunhong;Kim Yongmo;Ahn Kookyoung;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.60-67,
|
|
9 |
Flamelet Modelling of Soot Formation and Oxidation in a Laminar Diffusion Flame
Kim Gunhong;Kim Hoojoong;Kim Yongmo;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.68-75,
|
|
10 |
Validation of Driver Steering Model with Vehicle Test
Chung Taeyoung;Lee Gunbok;Yi Kyongsu;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.76-82,
|
|
11 |
Design of Vehicle Stability Control Algorithm Based on 3-DOF Vehicle Model
Chung Taeyoung;Yi Kyongsu;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.83-89,
|
|
12 |
Performance and Transmission Efficiency Analysis of 2-Mode Hydro Mechanical Transmission
Jung Gyuhong;Kim Hyoungeui;Kim Jongki;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.90-98,
|
|
13 |
Development of an Efficient Vehicle Dynamics Model Using Massless Link of a Suspension
Jung Hongkyu;Kim Sangsup;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.99-108,
|
|
14 |
Vehicle Dynamics Modeling and Correlation Using the Kinematic and Compliance Test of the Suspension
Kim Sangsup;Jung Hongkyu;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.109-118,
|
|
15 |
Shape Optimization of the Lower Control Arm using the Characteristic Function and the Fatigue Analysis
Park Youngchul;Lee Donghwa;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.119-125,
|
|
16 |
Fault Detection Analysis by Using a Machinery Fault Simulator
Bae Taehan;Jang Sukdong;Song Chul Ki;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.126-131,
|
|
17 |
A Biomechanical Analysis in the Neck Injury according to the Position of Read Restraint During Low Speed Rear-End Impacts
Jo Huichang;Kim Youngeun;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.132-139,
|
|
18 |
Evaluation of Static/Dynamic Structural Strength for Automotive Round Recliner
Lee Dongjae;Park Changsoo;Lee Kyoungteak;Kim Sangbum;Kim Heonyoung;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.140-146,
|
|
19 |
Fatigue Durability Analysis and Evaluation for Straighted Type Exhaust System of Automobile
Park Sejong;Suh Hocheol;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.147-152,
|
|
20 |
Creep Behaviour of Solution Treated Alpha Titanium Alloy for Automotive Parts
Hwang Kyungchoong;Yoon Jongho;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.153-158,
|
|
21 |
The Effect of Compressive Residual Stress of Spring Steel for Vehicle on Corrosion
Park Keyungdong;An Jaepil;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.159-165,
|
|
22 |
Vehicle Stability Control for a 4WD HEV using Regenerative Braking and Electronic Brake force Distribution
Kim Donghyun;Kim Hyunsoo;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.166-173,
|
|
23 |
Optimal Driving Mode Analysis for Reducing Energy Consumption in Electric Multiple Unit
Kim Chi Tae;Kim Dong Hwan;Park Young Il;Han Sung Ho;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.174-183,
|
|
24 |
A Study on Product Data Quality Assurance for Automotive Industry
Yang Jeongsam;Han Soonhung;Kang Hyejeong;Kim Junki;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.184-193,
|
|
25 |
Timing Analysis of Distributed Real-time Control System using Response-time Analysis Tool
Choi Jaebum;Shin Minsuk;Sunwoo Myoungho;Han Seogyoung;
/
The Korean Society of Automotive Engineers
, v.13, no.1, pp.194-203,
|
|