Browse > Article List

논문
1 Combustion Characteristics of Methane-Air Mixture in a Constant Volume Combustion Chamber(3) : Exhaust Emission
최승환;전충환;장영준; / The Korean Society of Automotive Engineers , v.12, no.2, pp.1-8,
2 Effect of Exhaust Heat Exchanger on Catalytic Converter Temperature in an SI Engine
이석환;배충식; / The Korean Society of Automotive Engineers , v.12, no.2, pp.9-16,
3 Analysis of Heat Quantity in CNG Direct Injection Bomb(1) : Homogeneous Charge
최승환;전충환;장영준; / The Korean Society of Automotive Engineers , v.12, no.2, pp.17-23,
4 Analysis of Heat Quantity in CNG Direct Injection Bomb(2) : Inhomogeneous Charge
최승환;전충환;장영준; / The Korean Society of Automotive Engineers , v.12, no.2, pp.24-31,
5 The Effect of Injection Timing and Cavity Geometry on Fuel Mixture Formation in a Central Injected DI Gasoline Engine
김태안;강정중;김덕줄; / The Korean Society of Automotive Engineers , v.12, no.2, pp.32-38,
6 Visualization of the Icing at LPLi Engine Injector and the Effect of the Inflow of Ice Particle into Cylinder on the Combustion and the Exhaust Gas
박정철;김우석;이종화;이병옥;박경석; / The Korean Society of Automotive Engineers , v.12, no.2, pp.39-44,
7 A Study on the Combustion Characteristics of Lean Mixture by Radicals Induced Injection in a Constant Volume Combustor (1)
박종상;이태원;하종률;정성식; / The Korean Society of Automotive Engineers , v.12, no.2, pp.45-53,
8 Numerical Study on the Effect of Exhaust Flow Pattern under Real Running Condition on the Performance and Reliability of Closed-Coupled Catalyst
정수진;김우승; / The Korean Society of Automotive Engineers , v.12, no.2, pp.54-61,
9 The Effect of Simultaneous Application with Biodiesel and ULSD on Exhaust Emissions and DOC
박만재;백두성; / The Korean Society of Automotive Engineers , v.12, no.2, pp.62-68,
10 Numerical Study on the Droplet Vaporization Characteristics of Dimethyl Ether(DME) Droplet
유용욱;류종혁;김용모; / The Korean Society of Automotive Engineers , v.12, no.2, pp.69-75,
11 Effect of Fuel Injection Timing on the Performance and Exhaust Emissions in IDI Diesel Engine Using Biodiesel Fuel
유경현;오영택; / The Korean Society of Automotive Engineers , v.12, no.2, pp.76-82,
12 Development of a Rapid Compression Expansion Machine and Compression Ignition Combustion of Homogeneous Premixtures
조상현;김기수;임병택; / The Korean Society of Automotive Engineers , v.12, no.2, pp.83-90,
13 CFD Analysis for the Flow Phenomena of the Narrow Channels in Plate Heat Exchanger for Intercooler
윤천석;한승한; / The Korean Society of Automotive Engineers , v.12, no.2, pp.91-100,
14 CFD Analysis on the Continuous and Variable Damping Characteristics of a Semi-Active Shock Absorber
윤준원; / The Korean Society of Automotive Engineers , v.12, no.2, pp.101-108,
15 Reduction in Pressure Ripples for a Bent-Axis Piston Pump
Kim, Kyung-Hoon;Sohn, Kwon;Jang, Joo-Sup; / The Korean Society of Automotive Engineers , v.12, no.2, pp.109-116,
16 The Study on the Fatigue Life Prediction on Wheels through CAE
김만섭;고길주;김정헌;양창근;김관묵; / The Korean Society of Automotive Engineers , v.12, no.2, pp.117-122,
17 A Study for the Reliability Based Design Optimization of the Automobile Suspension Part
이종홍;유정훈;임홍재; / The Korean Society of Automotive Engineers , v.12, no.2, pp.123-130,
18 Robust Design of a Driver-Side Airbag Using the Taguchi Method
이권희;주원식; / The Korean Society of Automotive Engineers , v.12, no.2, pp.131-138,
19 Engine Control TCS using Throttle Angle Control and Estimated Load Torque
강상민;윤마루;선우명호; / The Korean Society of Automotive Engineers , v.12, no.2, pp.139-147,
20 Vibration Mode of the Drivesystem Considered the Vehicle Body's Dynamic Characteristics
유충준; / The Korean Society of Automotive Engineers , v.12, no.2, pp.148-159,
21 Analysis of the Effect of Contact Stiffness on the Out-of-plane Motion of a Disc Brake System using 2-DOE Model
신기홍;조용구;차병규;오재응; / The Korean Society of Automotive Engineers , v.12, no.2, pp.160-167,
22 A New Shift Algorithm using a Longitudinal Accelerometer
박진호; / The Korean Society of Automotive Engineers , v.12, no.2, pp.168-174,
23 Development of Automotive Braking Performance Analysis Program Considering Dynamic Characteristic
정일호;이수호;서종휘;박태원; / The Korean Society of Automotive Engineers , v.12, no.2, pp.175-181,
24 Characteristics of Ultrasonic Test on Interfaces of Adhesively Bonded Components
정남용;박성일; / The Korean Society of Automotive Engineers , v.12, no.2, pp.182-189,
25 Optical Design of Reflector of Automotive Headlamp
사종엽;박정공; / The Korean Society of Automotive Engineers , v.12, no.2, pp.190-196,
26 A Study on the Circuit Composition and Characteristics Analysis for Heavy-Duty Vehicular Hybrid Hydraulic Driving System
이재구;이재천;한문식; / The Korean Society of Automotive Engineers , v.12, no.2, pp.197-204,
27 Development of an Automobile Black Box for Reconstruction Analysis of Collision Accidents
이원희;한인환; / The Korean Society of Automotive Engineers , v.12, no.2, pp.205-214,