|
| 1 |
A Study on Combustion and Emission Characteristics of the Methanol Blended Fuel in SI Engine
조행묵;이창식;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.1-6,
|
|
| 2 |
Effects of Injection Timing and Intake Flow on In-Cylinder Fuel Behavior in a GDI Engine
이정훈;강정중;김덕줄;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.7-13,
|
|
| 3 |
A Study on Engine Valve and Seat Insert Wearing Depending on Speed Change
전경진;홍재수;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.14-20,
|
|
| 4 |
The Study on the Control Performance of a Screw Type Super-charger for Automotive Use
배재일;배신철;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.21-29,
|
|
| 5 |
The Effects of Valve Timing Dual Equal Retard/Advance on Performance in an SOHC SI Engine
엄인용;이원근;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.30-36,
|
|
| 6 |
A Study on the Combustion Characteristic and Soot Distribution of a Common Rail Type D.I.Diesel Visualized Engine with Pilot Injection
이재용;한용택;이기형;이창식;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.37-43,
|
|
| 7 |
Evaluation of Thermal Fluid Characteristics for EGR Cooler with Spiral Type
허형석;원종필;박경석;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.44-50,
|
|
| 8 |
A Cycle Simulation Method for an HCCI Engine using Detailed Chemical Kinetics
송봉하;김동광;조남효;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.51-58,
|
|
| 9 |
Performance Evaluation of Diesel Oxidation Catalysts for Diesel Vehicles
최병철;박희주;정명근;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.59-64,
|
|
| 10 |
An Experimental Study on the Turbulent Combustion Characteristics of Hydrocarbon Mixtures by Hydrogen Addition
김준효;한원희;키도히로유끼;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.65-72,
|
|
| 11 |
An Experimental Study on the NOx Formation of Fuel Staged Combustor
정진도;안국영;한지웅;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.73-79,
|
|
| 12 |
Dynamics Analysis of Pressure Control Characteristics in a Variable Pressure Solenoid Valve
김형만;태혁준;이현우;이창훈;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.80-85,
|
|
| 13 |
The Characteristics of Ozone Formation from a Gaseous Fueled SI Engine with Various Operating Parameters
김창업;강건용;배충식;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.86-92,
|
|
| 14 |
The Thermal Analysis of Brake Disc using the Solid Model and 2D Coupled Model
강상욱;김창진;이대희;김흥섭;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.93-100,
|
|
| 15 |
Fatigue Analysis of Spot-welded Multi-Lap Joint of STS301L Using the Maximum Stress
남태헌;정원석;배동호;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.101-107,
|
|
| 16 |
Evaluation and Testing of out of Position for Airbag Design
전상기;이현중;박경진;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.108-117,
|
|
| 17 |
Manufacturing Preparations in the New Car Development for an Automotive Body Shop by Digital Manufacturing Technologies
노상도;박영진;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.118-126,
|
|
| 18 |
A Study on the Development of No Spin Differential for an Off-road Vehicle
편영식;장영도;이영춘;박정현;여진욱;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.127-133,
|
|
| 19 |
Development and Application of System for Pressure Distribution Measurement
김용환;박성하;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.134-140,
|
|
| 20 |
Effect of Corner Exit Speed on the Time to Go Down a Straight
장성국;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.141-146,
|
|
| 21 |
Stress Analysis for Torsional Spring Box of Radial Dual Mass Flywheel
최병기;노승훈;남욱희;김광수;최성종;이춘열;채영석;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.147-154,
|
|
| 22 |
Development of IEEE 1451 based Smart Module for In-vehicle Networking Systems
Lee, Kyung-Chang;Kim, Man-Ho;Lee, Suk;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.155-163,
|
|
| 23 |
Transient Dynamic Analysis of a Patterned Tire Rolling over a Cleat with an Explicit Finite Element Program
김기운;정현성;범현규;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.164-170,
|
|
| 24 |
3-D Vibration Modes of the Tire in Ground Contact and Its Effects on Axle When Excited by a 3-D Impact at the Center of Contact Patch
김용우;남진영;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.171-182,
|
|
| 25 |
The Performance Improvement for an Active Noise Contort of Automotive Intake System under Rapidly Accelerated Condition
이충휘;오재응;이유엽;이정윤;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.183-189,
|
|
| 26 |
Tooth Load Sharing and Deformation Overlap of Helical Gear Pairs for the Manual Transmission of Automobile
박수진;유완석;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.190-196,
|
|
| 27 |
Development of a Computer Model of a Large-sized Truck Considering the Frame as a Flexible Body
문일동;오재윤;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.197-204,
|
|
| 28 |
The Strength Analysis of Passenger Car Seat Frame
임종명;장인식;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.205-212,
|
|
| 29 |
Research of the Unmanned Vehicle Control and Modeling for Lane Tracking
김상겸;임하영;김정하;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.213-221,
|
|
| 30 |
Development of a Lane Departure Avoidance System using Vision Sensor and Active Steering Control
허건수;박범찬;홍대건;
/
The Korean Society of Automotive Engineers
, v.11, no.6, pp.222-228,
|
|