|
| 1 |
An Experimental Study on the Metal Surface Temperature and Heat Transfer by Improving Gasoline Engine Cooling Passages
이재헌;류택용;신승용;최재권;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.1-8,
|
|
| 2 |
Analysis of Particle Motion Impinging on a Flat Plate
Kim, Jin;Kim, Byung-Moon;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.9-16,
|
|
| 3 |
Analysis of Combustion Characteristics for a Homogeneous Charge Compression Ignition Engine with Load Condition
장시웅;이기형;이창식;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.17-23,
|
|
| 4 |
Performance and Emission Characteristics in a Spark-Ignition LPG Engine with Exhaust Gas Recirculation
조윤호;구준모;장진영;배충식;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.24-31,
|
|
| 5 |
Catalytic Removal of Nitric Oxide in Oxygen-Rich Exhaust with Methane over Metal Ion-Exchanged Zeolites
김상환;박정규;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.32-44,
|
|
| 6 |
Simulated Degradation of a Catalytic Converter
임명택;위전석;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.45-50,
|
|
| 7 |
Predicting Technique of the Performance for a Five-Valve Gasoline Engine by Gas Exchange Simulation
성백규;이기형;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.51-58,
|
|
| 8 |
A Study on the Model of an HSDI Common-Rail Injector and the Estimation of Needle Lift
성경훈;박승범;선우명호;나형규;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.59-66,
|
|
| 9 |
Effects of Combustion Chamber Shape on the Stratified Combustion of a GDI Engine
송재원;김미로;조한승;여진구;조남효;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.67-75,
|
|
| 10 |
Simplified Reaction Scheme of Hydrocarbon Fuels and Its Application to Autoignition of n-Heptane
여진구;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.76-83,
|
|
| 11 |
A Study for the Improvement of Start Ability and Exhaust Emissions in a Conventional Mixer Type LPG Engine on Cold Start
김우석;이종화;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.84-92,
|
|
| 12 |
A Simulation on the Stream and NOx Characteristics by EGR Rate Control
한영출;오용석;오상기;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.93-98,
|
|
| 13 |
Analysis of the Electric Energy and Exhaust Heat Energy for the Application of Thermo-Electric Generation in a Gasoline Vehicle
이영재;표영덕;김강출;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.99-105,
|
|
| 14 |
A Comparative Study on A/F Control Characteristics of Liquid and Gaseous Fueled Engines
심한섭;신규철;송창섭;선우명호;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.106-114,
|
|
| 15 |
Numerical Evaluation of a Radially Variable Cell Density Strategy for Improving Light-off Performance: Focusing on Light-off Catalyst
정수진;김우승;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.115-124,
|
|
| 16 |
Lightweight Design for Automotive Door Using Optimizations and Design of Experiments
송세일;배금종;이권희;박경진;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.125-132,
|
|
| 17 |
A Study on the Improvement of Dynamic Characteristics of ABS Outlet Valve
김병우;송창섭;이용주;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.133-142,
|
|
| 18 |
A Basic Study of the European Side Impact Characteristics of Electric Vehicle(II)
조용범;신효철;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.143-152,
|
|
| 19 |
Development of a Finite Element Model for Crashworthiness Analysis of a Small-Sized Bus
김학덕;송주현;오재윤;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.153-161,
|
|
| 20 |
A Selection of Initial Contact Angle of Automotive Wheel Bearing Units
안태길;이상훈;현준수;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.162-167,
|
|
| 21 |
Optimal Performance Design for Concrete Median Barrier with Crashworthiness Analysis
한석영;고성호;최형연;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.168-178,
|
|
| 22 |
Absolute Vehicle Speed Estimation using Fuzzy Logic
;;J. K. Hedrick;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.179-186,
|
|
| 23 |
A Study on the Fatigue Crack Growth of Cracks in Mechanical Joints
허성필;양원호;정기현;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.187-194,
|
|
| 24 |
Development of the SVPG(Sungkyunkwan Univ. Virtual Proving Ground) : System Configuration and Application of the Virtual Proving Ground
서명원;구태윤;권성진;신영수;조기용;박대유;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.195-202,
|
|
| 25 |
Development of Tubular Shaft for Reduction of Booming Noise in Vehicle Interior
고강호;국형석;이재형;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.203-208,
|
|
| 26 |
An Evaluation on the Steering Stability of the Guideway Vehicle
윤성호;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.209-215,
|
|
| 27 |
Design of the Impact Energy Absorbing Members and Evaluation of the Crashworthiness for Aluminum Intensive Vehicle
Kim, Heon-Young;Kim, Jin-Kook;Heo, Seung-Jin;Kang, Hyuk;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.216-233,
|
|
| 28 |
Effect of Slip on Tractive Performance of Driving Wheel
박원엽;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.234-243,
|
|
| 29 |
Development of the Variable Parametric Performance Model of Torque Converter for the Analysis of the Transient Characteristics of Automatic Transmission
임원식;이진원;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.244-254,
|
|
| 30 |
CVT Power Transmitting Characteristics and Control Logics for Negative Torque
송한림;이희라;김현수;
/
The Korean Society of Automotive Engineers
, v.10, no.1, pp.255-264,
|
|