|
| 1 |
Development of a Cemented Carbide-Welded Deburring Tool for Burr Removal in Drill Holes of AL6061 Workpieces
Sa, Min-Woo;Lee, Jae-Won;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.5, pp.1-7,
|
|
| 2 |
Development of Shaft Analysis Model for Power Transmission System Optimization
Lee, Ju-Yeon;Kim, Su-Chul;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.5, pp.8-16,
|
|
| 3 |
A Study on Improving Reliability of Durability Life Estimation for Excavator Fuel Tank Mounting Using Equivalent S-N Curve Method
Lee, Sung-Won;Jeong, Jin-Wook;Kim, Seong-Jae;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.5, pp.17-26,
|
|
| 4 |
A Study on the Characteristics of Chamdrilling for SCM415 Steel
Kim, Jin-su;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.5, pp.27-34,
|
|
| 5 |
A Study on the Improvement of Quality Management System to Improve Weapon System Performance
Bong, Ju-Sung;Baek, Il-Ho;Hur, Jang-Wook;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.5, pp.35-46,
|
|
| 6 |
A Study on the Improvement of Defense Specification Affairs to Improve the Production Quality of Military Supplies
Baek, Il-Ho;Bong, Ju-Sung;Hur, Jang-Wok;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.5, pp.47-54,
|
|
| 7 |
A Study on the Application of ANN for Surface Roughness Prediction in Side Milling AL6061-T4 by Endmill
Chun, Se-Ho;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.5, pp.55-60,
|
|
| 8 |
An Aanalytical Study of Structural Performance Evaluation for Multi-stage Control Movable Weir
Lee, Haesoo;Park, Taehyun;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.5, pp.61-68,
|
|
| 9 |
A Numerical Study on the Structural Stability Optimization of the Core Components of a 17cc Automotive Compressor
Yang, Yong-Kun;Wu, Yu-Ting;Qin, Zhen;Lyu, Sung-Ki;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.5, pp.69-75,
|
|
| 10 |
Optimal Stiffness Design of Self-Piercing Riveting's C-Frame for Multimaterial Joining
Shin, Chang-Yeul;Lee, Jae-Jin;Mun, Ji-Hun;Kwon, Soon-Deok;Yang, Min-Seok;Lee, Jae-Wook;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.5, pp.76-84,
|
|
| 11 |
Evaluation on Structure Design Sensitivity and Meta-modeling of Passive Type DSF for Offshore Plant Float-over Installation Based on Orthogonal Array Experimental Method
Lee, Dong-Jun;Song, Chang Yong;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.5, pp.85-95,
|
|
| 12 |
Comparative Study on Rolling Characteristics of Hexagonal Bar with Special Alloy for Advancing Drawing System
Lee, Young-Sik;Yang, Young-Joon;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.5, pp.96-102,
|
|
| 13 |
An Experimental Study on the Mechanical Mounting between GFRP Door Impact Beam and Steel Brackets
Ha, Jung-Chan;Shin, Young-cheol;Baek, In-Seok;Lee, Seok-Soon;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.5, pp.103-110,
|
|
| 14 |
Gear Analysis of Hydro-Mechanical Transmission System using Field Load Data
Kim, Jeong-Gil;Lee, Dong-Keun;Oh, Joo-Young;Nam, Ju-Seok;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.5, pp.111-120,
|
|
| 15 |
A Study on the Selection of Highly Flexible Blanket for Reverse Offset Printing
Shin, Seunghang;Kim, Seok;Cho, Young Tae;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.5, pp.121-127,
|
|
| 16 |
Design Method to Reduce the Press-Fitted Assembly Dama
Byon, Sung-Kwang;Choi, Ha-Young;Lee, Dong-Hyung;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.5, pp.128-134,
|
|
| 17 |
Analysis of Variations in the Bonding Strength Characteristics of the AL6061-PBT-Polymer Composite with Injection Parameters
Jung, Yong-Jun;Kim, Young-Shin;Jeon, Euy-Sik;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.5, pp.135-141,
|
|