|
| 1 |
A Study of the Affected Layer and Stress Corrosion Crack of Ultra-high-strength Steel (300M) for Aircraft Parts
Ahn, Jinwoo;Kim, Taehwan;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.4, pp.1-8,
|
|
| 2 |
Comparison Study on Side Milling of CFRP with AlCrN-based, Diamond-Like-Carbon(DLC), and Diamond-Coated End Mill
Sa, Min-Woo;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.4, pp.9-15,
|
|
| 3 |
Analysis of Heat Treatment Process Conditions for Output Characteristics of Permalloy Core on Current Sensors using DOE
Kim, Young Shin;Kim, Yoon Sang;Jeon, Euy Sik;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.4, pp.16-23,
|
|
| 4 |
Analysis of the Main Factor of Wheel Loader Torque via Wireless Measurements
Kang, Byung-Ik;Dong, Hong-Il;Kim, Byung-Ki;Choi, Yong-Hun;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.4, pp.24-29,
|
|
| 5 |
Manufacturing of Wedge-type Light Guide Plates for Large Liquid Crystal Displays
Kim, Min-Soo;Kim, Jangseob;Hong, Jun-Ho;Shin, Dongwon;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.4, pp.30-35,
|
|
| 6 |
Study on the Effect of Gas Pressure on Bottle Wall Thickness in the Blow Molding Process
Kim, Dong-Hwan;Seol, Sang-Seok;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.4, pp.36-44,
|
|
| 7 |
Seismic Integrity Analysis of an Electric Distributing Board Using the Response Spectra Analysis Method
Choi, Young-Hyu;Kim, Soo-Tae;Seol, Sang-Seok;Moon, Sung-Choon;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.4, pp.45-51,
|
|
| 8 |
Mold Quality Improvement through Overlay Welding
Yun, Il-Woo;Hwang, Jong-Dae;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.4, pp.52-57,
|
|
| 9 |
A Study on Rain Gutters with Coanda Effect
Jung, Yong Sin;Kim, Yong Sun;Shin, Hee Jae;Ko, Sang Cheol;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.4, pp.58-64,
|
|
| 10 |
Study on Output Characteristics of Printed Flexible Tactile Sensors Connected to Brass Terminals
Kim, Jindong;Bae, Yonghwan;Lee, Inhwan;Kim, Hochan;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.4, pp.65-70,
|
|
| 11 |
Efficient 5-axis Machining of a Propeller using Geometric Properties
Hwang, Jong-Dae;Yun, Il-Woo;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.4, pp.71-78,
|
|
| 12 |
A Study on the Deformation of Cable Pipes via Induction Bending
Joo, Yi-Hwan;Qin, Zhen;Moon, Seongmin;Lyu, Sung-Ki;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.4, pp.79-84,
|
|
| 13 |
Study of a Leveling Mobile Platform for Take-off and Landing of Unmanned Aerial Vehicles
Lee, Sangwoong;Kawk, Junyoung;Chu, Baeksuk;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.4, pp.85-92,
|
|
| 14 |
A Numerical Analysis for the Washboarding Phenomenon on the Top Surface of Fine Powders Using the Discrete Element Method
Lee, Seoungjun;Park, Junyoung;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.4, pp.93-98,
|
|
| 15 |
Numerical Analysis of Heat Transfer Characteristics inside a Solenoid Motor System
Jung, Min-Chae;Yoon, Sang Gil;Yoon, Dong Jin;Suh, Jeong-Se;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.4, pp.99-104,
|
|