|
| 1 |
A Study on Temperature Changes during Bone Scaling and Cutting of Dental Ultrasonic Scaling/Surgery System
Sa, Min-Woo;Ko, Tae-Jo;Kim, Jong Young;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.2, pp.1-8,
|
|
| 2 |
Laser-Induced Plasma Spectroscopy Measurement on Surface Roughness in Surface Treatment of Titanium Alloys
Kim, Ji-Hun;Kim, Joohan;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.2, pp.9-17,
|
|
| 3 |
Flow Analysis near Shell Warhead
Choi, Kyekwang;Cho, Jaeung;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.2, pp.18-23,
|
|
| 4 |
Experimental Study on the Structural Safety of the Corn Harvester attached to a Tractor
Shin, Chang-Seop;Yun, Tae-Yeong;Choi, Hwon;Kim, TaeHan;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.2, pp.24-29,
|
|
| 5 |
Improving the Formability of an SUS316 Plate using Laser-induced Surface Heat Treatment and Cladding Processes
Jo, Yeong-Kwan;Yu, Jae-Hyun;Jeong, Ho-Seung;Park, Sang-Hu;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.2, pp.30-37,
|
|
| 6 |
Structural Characteristics Evaluation of the Injection Spiral Blade Used in Small Wind Turbines under Operating Conditions
Gil, Young-Uk;Jo, Young-Kwan;Ji, Ho-Seong;Yang, Hyoung-Keun;Baek, Joon-Ho;Je, Duk-Geun;Jeong, Ho-Seung;Park, Sang-Hu;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.2, pp.38-46,
|
|
| 7 |
Analysis of Thermal Stress and Fatigue Life in the Steel Shell of a Cupola Furnace
Yang, Young-Soo;Bae, Kang-Yul;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.2, pp.47-54,
|
|
| 8 |
A Low-elastic MRE Fabrication Process based on the Taguchi Method
Shin, Dae-Yong;Tariq, Zakria;La, Moon-Woo;Park, Sung-Jea;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.2, pp.55-62,
|
|
| 9 |
Structural Analysis of Cold Draw Bar Packaging Automation System
Chin, Do-Hun;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.2, pp.63-68,
|
|
| 10 |
Precision Surface Profiling of Lens Molds using a Non-contact Displacement Sensor
Kang, Seung-Hoon;Jang, Dae-Yoon;Lee, Joohyung;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.2, pp.69-74,
|
|
| 11 |
A Study on Composite Materials Frame of Electric Vehicles using Impact Analysis
Ahn, Tae-Kyeong;Lee, Young-Jin;Lee, Sang-Chan;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.2, pp.75-80,
|
|
| 12 |
Stress Analysis and Design Improvement to Prevent Failure of the Damping Hinges of Built-in Refrigerators
Lee, Boo-Youn;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.2, pp.81-88,
|
|
| 13 |
Evaluation of Vertical Displacement of Door of Built-in Bottom-Freezer Type Refrigerator by Structural Analysis
Lee, Boo-Youn;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.2, pp.89-96,
|
|
| 14 |
A Study on the Structure for the Improvement of Vibration Characteristics of a Vehicle Seatbelt
Kim, Chang-Hee;Oh, Chea-Eun;Kim, Tea-Woo;Song, Chul-Woo;Lee, Seok-Soon;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.2, pp.97-102,
|
|
| 15 |
A Study on the Structure Analysis of Riveting Process for Aircraft Frame Manufacturing
Lee, Choon-Man;Oh, Won-Jung;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.2, pp.103-110,
|
|
| 16 |
Cell Disruption of Microalgae by Low-Frequency Non-Focused Ultrasound
Bae, Myeong-Gwon;Choi, Jun-Hyuk;Park, Jong-Rak;Jeong, Sang-Hwa;
/
The Korean Society of Manufacturing Process Engineers
, v.19, no.2, pp.111-118,
|
|