|
1 |
An Algorithm for the Removing of Offset Loop Twists during the Tool Path Generation of FDM 3D Printer
Olioul, Islam Md.;Kim, Ho-Chan;
/
The Korean Society of Manufacturing Process Engineers
, v.16, no.3, pp.1-8,
|
|
2 |
A Study of the Reverse Engineering of a Two-Stage Impeller-Submerged Pump for Cryogenic Fluids
Kweon, Byung Soo;Yi, Chung-Seob;Lee, Chi-Woo;
/
The Korean Society of Manufacturing Process Engineers
, v.16, no.3, pp.9-15,
|
|
3 |
Development of Coolant/Waste-oil Separating and Cooling System with Chip Treatment
Kim, Joong-Seon;Lee, Dong-Seop;Wang, Duck-Hyun;
/
The Korean Society of Manufacturing Process Engineers
, v.16, no.3, pp.16-23,
|
|
4 |
Formability Evaluation of the Vacuum Resin Transfer Molding of a CFRP Composite Automobile Seat Cross Part
Kim, Kun-Young;Kwak, Sung-Hun;Han, Gyu-Dong;Park, Jin-Seok;Cho, Jun-Haeng;Lee, Chang-Hoon;Kang, Myung-Chang;
/
The Korean Society of Manufacturing Process Engineers
, v.16, no.3, pp.24-29,
|
|
5 |
Design of Railway Vehicle Wheel Profile Suitable for Dual-rail Profile
Byon, Sung-Kwang;Lee, Dong-Hyeong;Choi, Ha-Young;
/
The Korean Society of Manufacturing Process Engineers
, v.16, no.3, pp.30-37,
|
|
6 |
A Study on the Electrical Discharge Blind Hole Tap Machining of STD11 with Copper Electrode
Park, In-Soo;Wang, Duck-Hyun;Kim, Gi-Tae;
/
The Korean Society of Manufacturing Process Engineers
, v.16, no.3, pp.38-44,
|
|
7 |
Inspection of Composite Working Implement of Tractor using 3D Scanning and Reverse Design
Lee, Choong-Ho;
/
The Korean Society of Manufacturing Process Engineers
, v.16, no.3, pp.45-53,
|
|
8 |
Study on Empirical Gear Profile Micro-modifications for Gear Transmission
Zhang, Qi;Wang, Jiu-Gen;Lyu, Sung-Ki;
/
The Korean Society of Manufacturing Process Engineers
, v.16, no.3, pp.54-62,
|
|
9 |
A Study on Accelerated Life Test of Hypoid Gear Rotary Reducer
Yoon, Sang-hwan;Beak, Kwon-in;Kim, Heonkeong;Lyu, Sung-ki;
/
The Korean Society of Manufacturing Process Engineers
, v.16, no.3, pp.63-68,
|
|
10 |
Development and Performance Evaluation of Hybrid Measuring Instrument
Lee, Young-Ho;Park, Gi-Bum;Cho, Young-Tae;Lee, Eung-Suk;Jung, Yoon-Gyo;
/
The Korean Society of Manufacturing Process Engineers
, v.16, no.3, pp.69-75,
|
|
11 |
A Study on the Exhaust Gas After Treatment for Small Ship
Yi, Chung-Seob;Lee, Chi-Woo;
/
The Korean Society of Manufacturing Process Engineers
, v.16, no.3, pp.76-81,
|
|
12 |
A Study on Thermal Deformation due to Fan Shape of Hair Dryer
Han, Moonsik;Cho, Jaeung;
/
The Korean Society of Manufacturing Process Engineers
, v.16, no.3, pp.82-87,
|
|
13 |
A Study on the Minimum Ignition Energy Measurements for Liquid Jet A1 Fuel under at Elevated Oxygen Concentrations and Reduced Atmospheric Pressures
Kwon, Haeng-Jun;Park, Seul-Hyun;
/
The Korean Society of Manufacturing Process Engineers
, v.16, no.3, pp.88-93,
|
|
14 |
Comparison of Fluid Modeling Methods Based on SPH and ISPH for a Buoy Design for a Wave Energy Converter
Jun, Chul-Woong;Sohn, Jeong-Hyun;Yang, Min-Seok;
/
The Korean Society of Manufacturing Process Engineers
, v.16, no.3, pp.94-99,
|
|
15 |
A Study on the Universal Outer Diameter Measurement Module using LVDT
Lee, Neung-Gu;Kwac, Lee-Ku;Kim, Hong-Gun;
/
The Korean Society of Manufacturing Process Engineers
, v.16, no.3, pp.100-106,
|
|
16 |
Development of a High Performance Extractor for the Effective Ingredient of Propolis
Cho, Young Tae;
/
The Korean Society of Manufacturing Process Engineers
, v.16, no.3, pp.107-112,
|
|
17 |
A Study on the Performance Evaluation of Cycloid Reducer
Park, Jin-Seok;Kim, Ki-Hun;Kim, Lae-Sung;Qin, Zhen;Lyu, Sung-Ki;
/
The Korean Society of Manufacturing Process Engineers
, v.16, no.3, pp.113-118,
|
|
18 |
Study to Reduce Process Cycle Time and to Improve Surface Roughness of a Mobile Phone Unibody Case through Cutting Force Optimization
Lee, Seung-Yong;Choi, Hyun-Jin;Lee, Jong-Chan;
/
The Korean Society of Manufacturing Process Engineers
, v.16, no.3, pp.119-124,
|
|
19 |
A Study on the Quantitative Analysis of Cutting Parameters and Prediction Model for Surface Roughness in Milling
Jang, Sung-Min;Kang, Shin-Gil;
/
The Korean Society of Manufacturing Process Engineers
, v.16, no.3, pp.125-130,
|
|
20 |
Reproducibility Prediction of Surface Roughness in Mold and Injected Parts through Polycarbonate Injection Molding
Hong, Su Yong;Kim, SungSu;Lee, Sang Sun;Lee, Ji Ho;Choi, Wong Jun;Kang, Myung Chang;
/
The Korean Society of Manufacturing Process Engineers
, v.16, no.3, pp.131-137,
|
|
21 |
Study on the Photoelectric Composite Cable for Hybrid Interconnection Implementation
Kim, Jae-Yeol;You, Kwan-Jong;Park, Ryeok;
/
The Korean Society of Manufacturing Process Engineers
, v.16, no.3, pp.138-145,
|
|
22 |
Evaluation of Reliability of Large Hybrid Curvic Gear Using Thermography
Lee, Gyung-Il;Kim, Jae-Yeol;
/
The Korean Society of Manufacturing Process Engineers
, v.16, no.3, pp.146-152,
|
|