|
| 1 |
Analytical Prediction of Bearing Life and Load Distribution for Plugin HEV
Zhang, Qi;Kang, Jae-Hwa;Yun, Gi-Baek;Lyu, Sung-Ki;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.1-7,
|
|
| 2 |
The Study on Interrupted Cutting Tool Life of Cermet and CBN in Ductile Cast Iron(FCD500)
Oh, Sung-Hoon;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.8-12,
|
|
| 3 |
Fracture Mechanic's Approach on Retardation Behaviors under Overloading
Kang, Yong-Goo;Park, Jun-Young;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.13-20,
|
|
| 4 |
Structural Analysis on Tension Bearing of Automotive Engine
Cho, Jae-Ung;Han, Moon-Sik;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.21-28,
|
|
| 5 |
Selection of the Optimal Machining Condition for a High-hardness Resin using the 5-axis Machine
Kim, Nam-Hun;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.29-34,
|
|
| 6 |
Performance Evaluation of Vane Motor Driven by Monopropellant
Hong, Deuk-Eui;Ryu, Ga-Ram;Han, Seung-Ho;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.35-41,
|
|
| 7 |
Tooth Modification for Spur Gear for Articulated Hauler's Final Drive
Oh, Sew-Oong;Zhang, Qi;Lee, In-Bum;Lyu, Sung-Ki;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.42-47,
|
|
| 8 |
Design of Non-linear Observer to Estimate Yaw Rate and Sidel Slip Angle
Song, Jeong-Hoon;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.48-53,
|
|
| 9 |
A Study on Effect of the Grinding in SCM420H Planetary Gear
An, In-Hyo;Hur, Nam-Soo;Lee, In-Bum;Lyu, Sung-Ki;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.54-59,
|
|
| 10 |
A Study on the Machining Characteristics of Prototype of Roller Gear Cams
Kim, Jin-Su;Kang, Seong-Ki;Lee, Dong-Seop;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.60-67,
|
|
| 11 |
Structural Durability Analysis of Tie Rod
Han, Moon-Sik;Cho, Jae-Ung;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.68-75,
|
|
| 12 |
Experimental Investigation on Machining Feasibility of Micro Patterns using a Single Crystal Diamond Tool
Kim, Hyun-Chul;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.76-81,
|
|
| 13 |
Structural Performance Test of Optimized Outer Tie Rod
Kim, Jong-Kyu;Seo, Sun-Min;Kim, Young-Jun;Lee, Dong-Jin;Lee, Seul;Park, Young-Chul;Lee, Kwon-Hee;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.82-87,
|
|
| 14 |
Improvement of the ED-Drilling Machinability using Multi-hole Electrodes
Kim, Chang-Ho;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.88-93,
|
|
| 15 |
Position Control System using Neural Network Algorithm for Butterfly Valve
Choi, Jeong-Ju;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.94-98,
|
|
| 16 |
The Experimental Study in the Micro Drilling of Excimer Laser on Pyrex Glass
Lee, Chul-Jae;Kim, Ha-Na;Jeong, Yun-Sang;Jun, Chan-Bong;Park, Young-Chul;Kang, Jung-Ho;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.99-103,
|
|
| 17 |
Experiments on Efficiency of Standing Type Waterwheel with Narrow Canal for Micro/Small Scale Hydro Power Plant
Kim, Dong-Jin;Lee, Kyong-Ho;Ahn, Kook-Chan;Kim, Bong-Hwan;Lee, Chi-Woo;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.104-108,
|
|
| 18 |
A Study on Combustion Characteristics using Forced Pulsating Flow
Yang, Young-Joon;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.109-114,
|
|
| 19 |
Effect of Metals used in Orthopedic on Magnetic Resonance Imaging II
Kim, Hyeong-Gyun;Choi, Seong-Dae;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.115-120,
|
|
| 20 |
A Simulation-based Optimization of Design Parameters for Cooling System of Injection Mold by using ANOVA with Orthogonal Array
Park, Jong-Cheon;Shin, Seung-Min;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.121-128,
|
|
| 21 |
Study of Weld Part Status Change by  Welding According to the Variation of Gas Composition and Welding Wire on SS400 Material
Kim, Bub-Hun;Kim, Won-Il;Choi, Chang;Park, Yong-Hwan;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.129-136,
|
|
| 22 |
A Study on Surface Corrosion of Compressed Chip of Al-lithium Alloy according to the Packing Method
Lee, In-Su;Kim, Hae-Ji;Kim, Deok-Hyun;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.137-141,
|
|
| 23 |
Tool Monitoring System using Vision System with Minimizing External Condition
Kim, Sun-Ho;Baek, Woon-Bo;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.5, pp.142-147,
|
|