|
| 1 |
Trends of Flat Mold Machining Technology with Micro Pattern
Je, Tae-Jin;Choi, Doo-Sun;Jeon, Eun-Chae;Park, Eun-Suk;Choi, Hwan-Jin;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.1-6,
|
|
| 2 |
Micro Pattern Machining on Larger Surface Roll Molds
Song, Ki-Hyeong;Lee, Dong-Yoon;Park, Kyung-Hee;Lee, Seok-Woo;Kim, Hyun-Cheol;Je, Tae-Jin;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.7-12,
|
|
| 3 |
Ultra Precision Machining Technique for Optical System Parts
Yang, Sun-Choel;Kim, Sang-Hyuk;Huh, Myung-Sang;Chang, Ki-Soo;Park, Soon-Sub;Won, Jong-Ho;Kim, Geon-Hee;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.13-19,
|
|
| 4 |
Review of Recent Progress in Micromilling Process Research
Heo, Se-Gon;Lee, Won-Kyun;Min, Byung-Kwon;Je, Tae-Jin;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.20-26,
|
|
| 5 |
The Improvement of Surface Roughness of Marine Propeller by Continuous Control of Cutter Posture in 5-Axis Machining
Son, Hwang-Jin;Lim, Eun-Seong;Jung, Yoon-Gyo;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.27-33,
|
|
| 6 |
Prediction of Tensile Strength for Friction-Welded Magnesium Alloy Part by Acoustic Emission
Shin, Chang-Min;Kang, Dae-Min;Choi, Jong-Whan;Kwak, Jae-Seob;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.34-39,
|
|
| 7 |
A Study on Flow Characteristics in Lubrication System of Manual Transmission in a Commercial Vehicle
Yun, Ji-Hun;Yi, Chung-Soeb;Suh, Jeong-Se;Song, Chul-Ki;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.40-46,
|
|
| 8 |
Evaluation of Inner Flow Characteristics of Oxygen Sensor for Vehicle Exhaust System
Han, Dae-Kwang;Suh, Ho-Cheol;Yee, Jurng-Jae;Kang, Jung-Ho;Han, Seung-Ho;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.47-54,
|
|
| 9 |
Stress Analysis of Helical Gear for a Railway Reducer
Lee, Seul;Lee, Dong-Hyoung;Hwang, Seok-Cheol;Lee, Kwon-Hee;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.55-59,
|
|
| 10 |
CAE Analysis and Optimization of Injection Molding for a Mobile Phone Cover
Park, Ki-Yoon;Kim, Hyeon-Seong;Kang, Jin-Hyun;Park, Jong-Cheon;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.60-65,
|
|
| 11 |
The Establishment of Bonding Conditions of Cu Sheet using an Ultrasonic Metal Welder
Park, Woo-Yeol;Jang, Ho-Su;Park, Dong-Sam;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.66-72,
|
|
| 12 |
The Evaluation of the Laser Machinability for Mechanical Materials using Taguchi Experimental Method Design
Kim, Sang-Kyu;Yoon, Yeo-Myung;Jung, Yoon-Gyo;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.73-78,
|
|
| 13 |
A Study on the Development of Twist Wheel Type Waste Vinyl Remover (II) - Development of Tractor Attached Vinyl Remover -
Ha, Yu-Shin;Park, Kyu-Sik;Kim, Jin-Hyun;Choe, Jung-Seob;Son, Chul-Min;Nam, Sang-Heon;Kim, Tae-Wook;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.79-84,
|
|
| 14 |
Development of Exclusive System for Basic Design of Offshore Bridge Crane
Park, Se-Myoung;Lee, Won-Kyu;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.85-91,
|
|
| 15 |
Collision Characteristics of an Adult Bicycle to a Car
Kang, Dae-Min;Ahn, Seung-Mo;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.92-97,
|
|
| 16 |
A Study on the Precision Hole Machiningof Pre Hardened Mould Steel
Lee, Seung-Chul;Cho, Gyu-Jae;Park, Jong-Nam;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.98-104,
|
|
| 17 |
Thermal Characteristics and Frequency Analysis of a High Speed Spindle for Small Tapping Center
Choi, Dae-Bong;Kim, Soo-Tae;Ro, Seung-Kook;Cho, Hyun-Taek;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.105-111,
|
|
| 18 |
Development of Stopper Mechanism for the Precision Stage with Nanometer Accuracy
Kweon, Hyun-Kyu;Park, Chang-Yong;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.112-117,
|
|
| 19 |
Modeling of Boundary Layer using Atmospheric Boundary Layer Wind Tunnel of UCD
White, Bruce R.;Kim, Bong-Hwan;Kim, Dae-Seong;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.118-124,
|
|
| 20 |
Optimization of Sheet Metal Forming Process by using Decision-Making Theory
Kim, Kyung-Mo;Yin, Jeong-Je;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.125-136,
|
|
| 21 |
Study on Structural Analysis of Flywheel under Rotary Power
Han, Moon-Sik;Cho, Jae-Ung;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.137-143,
|
|
| 22 |
Modification of the Supporting Structure of a Wafer Polishing Machine for the Improved Stability
Ro, Seung-Hoon;Kim, Young-Jo;Kim, Dong-Wook;Yi, Il-Hwan;Park, Keun-Woo;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.144-151,
|
|
| 23 |
High-speed Machining Technology using CNC Machining Center Equipped with Attachment Type High-Speed Spindle
Lee, Yong-Chul;Kwak, Tae-Soo;Kim, Gyung-Nyun;Lee, Jong-Ryul;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.152-158,
|
|
| 24 |
A Numerical Analysis for the Performance Improvement of a Channel Heat Exchanger
Jang, Byung-Hyun;Kim, Si-Peom;Lee, Kwon-Hee;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.159-164,
|
|
| 25 |
A Study on the Grinding Characteristics of Porous Ceramics
Park, Hwi-Keun;Park, Se-Jin;Choi, Yun-Seo;Hwang, In-Hwan;Lee, Jong-Chan;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.165-170,
|
|
| 26 |
A Study on the Machining Characteristics of Turning Inserts of Lateral Chip Breaker Shape
Kim, Taeck-Su;Lee, Sang-Min;Cho, Jun-Hyun;Park, Sang-Hyun;Lee, Jong-Chan;
/
The Korean Society of Manufacturing Process Engineers
, v.11, no.2, pp.171-176,
|
|