|
| 1 |
The Control Technology of Cutter Path and Cutter Posture for 5-axis Control Machining
Hwang, Jong-Dae;Lim, Eun-Seong;Jung, Yoon-Gyo;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.2, pp.1-8,
|
|
| 2 |
The Postprocessor Technology of for 5-axis Control Machining
Jung, Hyoun-Chul;Hwang, Jong-Dae;Kim, Sang-Myung;Jung, Yoon-Gyo;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.2, pp.9-15,
|
|
| 3 |
Study of Design Technology of a Turbo-impeller
Park, Young-Ha;Choi, Hyoung-Jun;Kim, Chae-Sil;Cho, Soo-Yong;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.2, pp.16-25,
|
|
| 4 |
A Review on the Design of a Tilting Pad Journal Bearing for a 1.2MW Turbo-blower
Jo, Hyeon-Min;Jung, Hoon-Hyung;Kim, Chae-Sil;Cho, Soo-Yong;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.2, pp.26-31,
|
|
| 5 |
Development of the High Power Turbo Blower Gear
Jeon, Eon-Chan;Lee, Woo-Hyun;Lee, Kwon-Hee;Park, Young-Chul;Sung, Jang-Hyun;Kim, Young-Hee;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.2, pp.32-37,
|
|
| 6 |
A Study for the Roundness Estimation
Kim, Soo-Kwang;Jun, Jae-Uhk;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.2, pp.38-45,
|
|
| 7 |
A Study on Flow Analysis at Ball Valve according to Opening and Shutting Angle
Cho, Jae-Ung;Han, Moon-Sik;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.2, pp.46-51,
|
|
| 8 |
A Study on the Relation Between Backlash and Tooth Contact for Optimization of the Conical Gear Marine Gearbox
Kang, Jai-Hwa;Zhang, Qi;Ahn, In-Hyo;Lyu, Sung-Ki;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.2, pp.52-60,
|
|
| 9 |
Development of Atomization Spraying System for Solvent-free Paint(I) - Flow Analysis of Hydraulic Actuator -
Kim, Dong-Keon;Kim, Bong-Hwan;Shin, Sun-Bin;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.2, pp.61-66,
|
|
| 10 |
Development of Atomization Spraying System for Solvent-free Paints(II) - Structural Analysis of Hydraulic Actuator -
Kim, Dong-Keon;Kim, Bong-Hwan;Shin, Sun-Bin;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.2, pp.67-72,
|
|
| 11 |
Cutting Performance Evaluation of Non-Ground Cross-hole Type Milling Insert
Park, Hwi-Keun;Kim, Taeck-Su;Lee, Sang-Min;Lee, Won-Suk;Choi, Yun-Seo;Lee, Jong-Chan;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.2, pp.73-78,
|
|
| 12 |
Development of a Magnetic Seal and the Leak Test
Kim, Ock-Hyun;Lee, Min-Ki;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.2, pp.79-83,
|
|
| 13 |
A Study on the Heat Treatment Effect of SCM Series Gear
Ahn, Min-Ju;Ahn, In-Hyo;Zhang, Qi;Lyu, Sung-Ki;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.2, pp.84-89,
|
|
| 14 |
Contact Stress Analysis of Helical Gear for Turbo Blower
Hwang, Seok-Cheol;Lee, Dong-Hyong;Park, Young-Chul;Lee, Kwon-Hee;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.2, pp.90-95,
|
|
| 15 |
Hot Forging Analysis of Rotor Grip with Titanium Alloy for Unmanned Helicopter
Lee, Seong-Chul;Kong, Jae-Hyun;Hur, Kwan-Do;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.2, pp.96-103,
|
|
| 16 |
Development of Aspheric Surface Profilometry using 2nd Derivative
Kim, Byoung-Chang;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.2, pp.104-109,
|
|
| 17 |
Friction Property of Angle and Width Effect for Micro-grooved Crosshatch Pattern under Lubricated Sliding Contact
Chae, Young-Hun;Kim, Seock-Sam;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.2, pp.110-116,
|
|
| 18 |
A Study on the Coating Characteristics of SCM415 Steel
Jang, Jeong-Hwan;Xu, Zhezhu;Kim, Hae-Ji;Kim, Nam-Kyung;Lyu, Sung-Ki;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.2, pp.117-123,
|
|
| 19 |
Numerical and Experimental Prediction of Asymmetric Deformation Behavior and Its Setup Model in Plate Rolling
Byon, Sang-Min;Lee, Young-Seog;Jun, Eon-Chan;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.2, pp.124-129,
|
|
| 20 |
Study on Structural Safety of Automotive Inner and Outer Bumper
Han, Moon-Sik;Cho, Jae-Ung;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.2, pp.130-134,
|
|
| 21 |
A Study of the Effectiveness of Hollow Ratio on Cutting Force of Diamond Core Drill
Kim, Kwang-Min;Choi, Seong-Dae;Hong, Young-Bae;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.2, pp.135-141,
|
|