Browse > Article List

논문
1 Equivalent Plastic Hinge Length Model for Flexure-Governed RC Shear Walls
Mun, Ju-Hyun;Yang, Keun-Hyeok; / Korea Institute for Structural Maintenance Inspection , v.18, no.2, pp.1-8,
2 Collapse Capacity Evaluation of Steel Intermediate Moment Frames Using Incremental Dynamic Analysis
Shin, Dong-Hyeon;Kim, Hyung-Joon; / Korea Institute for Structural Maintenance Inspection , v.18, no.2, pp.9-20,
3 Experimental Study for GFRP Reinforced Concrete Beams without Stirrups
Ko, Seong-Hyun; / Korea Institute for Structural Maintenance Inspection , v.18, no.2, pp.21-29,
4 An Analysis Method of Large Structure Using Matrix Blocking
Jung, Sung-Jin;Lee, Min-Sup; / Korea Institute for Structural Maintenance Inspection , v.18, no.2, pp.30-37,
5 A FEA Study on the Bond Property according to the Rib-Shape of Reinforcement
Mihn, Joon-Soo;Hong, Geon-Ho; / Korea Institute for Structural Maintenance Inspection , v.18, no.2, pp.38-46,
6 Reliability Analysis Model for Deflection Limit State of Deteriorated Steel Girder Bridges
Eom, Jun-Sik; / Korea Institute for Structural Maintenance Inspection , v.18, no.2, pp.47-53,
7 An Experimental Study on the Bolted Connection Fatigue Capacity of Corrugated Steel Plates
Oh, Hong-Seob; / Korea Institute for Structural Maintenance Inspection , v.18, no.2, pp.54-63,
8 A Strain based Load Identification for the Safety Monitoring of the Steel Structure
Oh, Byung-Kwan;Lee, Ji-Hoon;Choi, Se-Woon;Kim, You-Sok;Park, Hyo-Seon; / Korea Institute for Structural Maintenance Inspection , v.18, no.2, pp.64-73,
9 Analytical Study for Performance Improvement of Studs for Steel Plate Concrete(SC) Walls subjected to Bending Moment
Cho, Sung-Gook;Lim, Jin-Sun;Jeong, Young-Do;Yi, Seong-Tae; / Korea Institute for Structural Maintenance Inspection , v.18, no.2, pp.74-81,
10 Evaluation of Shear Behavior of Precast RC Beams According to Replacement Ratio of Ground Granulated Blast Furnace Slag
Jeong, Chan-Yu;Kim, Young-Seek;Lee, Jin-Seop;Kim, Sang-Woo;Kim, Kil-Hee; / Korea Institute for Structural Maintenance Inspection , v.18, no.2, pp.82-89,
11 Shear Strength of One-way Hollow Slab According to Effective Cross Section and Reinforcement Ratio
Seok, Keun-Young;Ye, Sang-Min;Kang, Joo-Won; / Korea Institute for Structural Maintenance Inspection , v.18, no.2, pp.90-98,
12 Effect of Steam Curing on the Properties of Recycled Aggregate Concrete
Lee, Seung-Tae;Choi, Jin-Yeop;Park, Ki-Tae;Seo, Dong-Woo;You, Young-Jun; / Korea Institute for Structural Maintenance Inspection , v.18, no.2, pp.99-107,
13 Fatigue Evaluation of a Steel Bridge in Service through Stress History Measurement and Consideration of Stress Category
Na, Sung-Ok;Kwon, Min-Ho;Cha, Cheol-Jun;Kim, In-Ho; / Korea Institute for Structural Maintenance Inspection , v.18, no.2, pp.108-116,
14 The Fundamental Study of Strength and Drying Shrinkage on Alkali-activated Slag Cement Mortar with Different Entering Point of Fine Aggregate
Kim, Tae-Wan;Eom, Jang-Sub;Seo, Ki-Young;Park, Hyun-Jae; / Korea Institute for Structural Maintenance Inspection , v.18, no.2, pp.117-125,
15 Development of Measuring Method for Bridge Scour and Water Level Using Temperature Difference Between Medium Interfaces
Joo, Bong-Chul;Park, Ki-Tae;You, Young-Jun;Hwang, Yoon-Koog; / Korea Institute for Structural Maintenance Inspection , v.18, no.2, pp.126-133,