|
| 1 |
A Stator-Separated Axial Flux-Switching Hybrid Excitation Synchronous Machine
Liu, Xiping;Zheng, Aihua;Wang, Chen;
/
Journal of International Conference on Electrical Machines and Systems
, v.1, no.4, pp.399-404,
|
|
| 2 |
Energy Model Based Direct Torque Control of Induction Motor Using IP Controllers
Mannan, Mohammad Abdul;Murata, Toshiaki;Tamura, Junji;
/
Journal of International Conference on Electrical Machines and Systems
, v.1, no.4, pp.405-411,
|
|
| 3 |
Novel Claw Pole Eddy Current Load for Testing DC Counter Rotating Motor - Part II: Design and Modeling
Kanzi, Khalil;Roozbehani, Sam;Dehafarin, Abolfazl;Kanzi, Majid;
/
Journal of International Conference on Electrical Machines and Systems
, v.1, no.4, pp.412-418,
|
|
| 4 |
Percussive Drilling Application of a Tubular Reciprocating Translational Motion Permanent Magnet Synchronous Motor
Zhang, Shujun;Norum, Lars E.;Nilssen, Robert;Lorenz, Robert D.;
/
Journal of International Conference on Electrical Machines and Systems
, v.1, no.4, pp.419-424,
|
|
| 5 |
Smart Grid-The next Generation Electricity Grid with Power Flow Optimization and High Power Quality
Hu, Jiefeng;Zhu, Jianguo;Platt, Glenn;
/
Journal of International Conference on Electrical Machines and Systems
, v.1, no.4, pp.425-433,
|
|
| 6 |
Simulation of Active Compensated Pulsed Alternator with a Laser Flashlamp Load Based on Simplified Model
Yuan, Pei;Yu, Kexun;Ye, Caiyong;Ren, Zhang'ao;
/
Journal of International Conference on Electrical Machines and Systems
, v.1, no.4, pp.434-439,
|
|
| 7 |
Computer-based Automated System for Determining the Characteristics, Losses and Efficiency of Separately Excited DC Motors
Kaur, Puneet;Chatterji, S.;
/
Journal of International Conference on Electrical Machines and Systems
, v.1, no.4, pp.440-447,
|
|
| 8 |
A Cascaded Multilevel Inverter Using Bidirectional H-bridge Modules
Kang, Feel-Soon;Joung, Yeun-Ho;
/
Journal of International Conference on Electrical Machines and Systems
, v.1, no.4, pp.448-456,
|
|
| 9 |
Comparison of Multilevel Inverters Employing DC Voltage Sources Scaled in the Power of Three
Hyun, Seok-Hwan;Kwon, Cheol-Soon;Kim, Kwang-Soo;Kang, Feel-Soon;
/
Journal of International Conference on Electrical Machines and Systems
, v.1, no.4, pp.457-463,
|
|
| 10 |
Design and simulation of an RCN Controller to improve steady state behavior of a self-excited induction generator
Garg, Anjali;Sandhu, Kanwarjit Singh;Saini, Lalit Mohan;
/
Journal of International Conference on Electrical Machines and Systems
, v.1, no.4, pp.464-471,
|
|
| 11 |
Input AC Voltage Sensorless Control Scheme for a Three-Phase PWM Rectifier in Wind Power Generation System
Wu, YanJun;
/
Journal of International Conference on Electrical Machines and Systems
, v.1, no.4, pp.472-476,
|
|
| 12 |
A Sensorless Switched Reluctance Drive System Based on the Improved Simplified Flux Method
Li, Zhenguo;Song, Andong;Ahn, Jin-Woo;
/
Journal of International Conference on Electrical Machines and Systems
, v.1, no.4, pp.477-482,
|
|
| 13 |
A Contactless Power Supply for a DC Power Service
Kim, Eun-Soo;Kim, Yoon-Ho;
/
Journal of International Conference on Electrical Machines and Systems
, v.1, no.4, pp.483-491,
|
|
| 14 |
Magnetic and Thermal Analysis of a Water-cooled Permanent Magnet Linear Synchronous Motor
Zhang, Xinmin;Lu, Qinfen;Cheng, Chuanying;Ye, Yunyue;
/
Journal of International Conference on Electrical Machines and Systems
, v.1, no.4, pp.498-504,
|
|
| 15 |
Preliminary study on a 3D field permanent magnet flux switching machine - from tubular to rotary configurations
Wang, Can-Fei;Shen, Jian-Xin;
/
Journal of International Conference on Electrical Machines and Systems
, v.1, no.4, pp.505-508,
|
|
| 16 |
Testing and experimental characterization of a linear permanent magnet actuator for active vehicle suspension
Wang, Jiabin;Wang, Weiya;
/
Journal of International Conference on Electrical Machines and Systems
, v.1, no.4, pp.509-516,
|
|
| 17 |
Modeling and Evaluation of Linear Oscillating Actuators
Chen, X.;Zhu, Z.Q.;
/
Journal of International Conference on Electrical Machines and Systems
, v.1, no.4, pp.517-524,
|
|