|
| 1 |
Optimization of Printing Conditions Using Design Experiments for Minimization of Resistances of Electrodes in Roll-to-roll Gravure Printing Process
Lee, Sang Yoon;Kim, Cheol;Kim, Chung Hwan;
/
The Korean Society of Manufacturing Technology Engineers
, v.26, no.4, pp.351-356,
|
|
| 2 |
Development of Sleeve Parts for Continuous Hot Zinc Plating Roll Applied to Wear-Resistant Alloy Cast Steel
Park, Dong-Hwan;Hong, Jin-Tae;Kwon, Hyuk-Hong;
/
The Korean Society of Manufacturing Technology Engineers
, v.26, no.4, pp.357-364,
|
|
| 3 |
Development of a Ultrasonic System for Nano-Surface Reformation Process
Kim, Hyunse;Lim, Euisu;Park, Jong-Kweon;
/
The Korean Society of Manufacturing Technology Engineers
, v.26, no.4, pp.365-370,
|
|
| 4 |
Comparisons of the Heat Dissipation Performances of MPCB and FPCB in LED Lights
Shin, Sang-Muk;Moon, Duk-Young;Yoo, Kyung-Sun;Hyun, Dong-Hoon;
/
The Korean Society of Manufacturing Technology Engineers
, v.26, no.4, pp.371-377,
|
|
| 5 |
Temperature and Mechanical Properties of Welded Joints Under Friction Stir Welding Conditions of Mg Alloy (AZ61)
Lee, Woo Geun;Kim, Jung Seok;Sun, Seung-Ju;
/
The Korean Society of Manufacturing Technology Engineers
, v.26, no.4, pp.378-386,
|
|
| 6 |
Development of Constant Delivery Micro Pump in a Variable Pressure Environment for Intrathecal Drug Administration System
Lee, Tae Gyeong;Lee, Cheol Su;Jung, Yu Seok;Park, Gyeong Geun;
/
The Korean Society of Manufacturing Technology Engineers
, v.26, no.4, pp.387-394,
|
|
| 7 |
Investigation of Energy Absorption Property of Glass/Epoxy Composite Tubes with Bevel and Tulip Triggers
Kim, Jung Seok;
/
The Korean Society of Manufacturing Technology Engineers
, v.26, no.4, pp.395-401,
|
|
| 8 |
Improvement of Cutting Conditions in End-milling Using Deep-layered Neural Networks
Lee, Sin-Young;
/
The Korean Society of Manufacturing Technology Engineers
, v.26, no.4, pp.402-409,
|
|
| 9 |
Optimization of the Hydro-Forming Process for Aluminum Bumper Beams by Using Finite Element Analysis
Son, Wonsik;Yum, Sanghyuk;Lee, Jihoon;Kim, Seungmo;
/
The Korean Society of Manufacturing Technology Engineers
, v.26, no.4, pp.410-417,
|
|
| 10 |
Load Measurement Algorithm for a Vehicle Wheel Dynamometer
Lee, Jinsung;Jeong, Kyuwon;
/
The Korean Society of Manufacturing Technology Engineers
, v.26, no.4, pp.418-424,
|
|
| 11 |
Temperature Measurement on Ultrasonic Weld Surfaces by Using an Infrared Sensor
Kim, Won-Ho;Kang, Eun-Ji;Min, Kyung-Tak;
/
The Korean Society of Manufacturing Technology Engineers
, v.26, no.4, pp.425-429,
|
|
| 12 |
Influence of Bonding Strength on Surface Pattern in Bonding of Carbon Fiber Reinforced Plastic and Metal
Kim, Ji-Hun;Cheong, Seong-Kyun;Kim, Joohan;
/
The Korean Society of Manufacturing Technology Engineers
, v.26, no.4, pp.430-435,
|
|
| 13 |
Evaluation of Structural Integrity of Three-axle Bogie Frame used in Railway Freight Cars
Kang, Seung-Gu;Shin, Kwang-Bok;Im, Jae-Moon;Park, Jung-Joon;Jeon, Seung-Gie;
/
The Korean Society of Manufacturing Technology Engineers
, v.26, no.4, pp.436-440,
|
|