|
| 1 |
Evaluation of Elastic Properties for Nanoscale Coating Layers Using Ultrasonic Atomic Force Microscopy
Kwak, Dong Ryul;Cho, Seung Bum;Park, Ik Keun;
/
The Korean Society of Manufacturing Technology Engineers
, v.24, no.5, pp.475-480,
|
|
| 2 |
Acoustic Characteristics of High Intensity Focused Ultrasound for Necrosis of CTO
Park, Chan Hee;Jeong, Sang Hwa;
/
The Korean Society of Manufacturing Technology Engineers
, v.24, no.5, pp.481-488,
|
|
| 3 |
Integration Forming Technology based on Cold Hot Forging of Clutch Jaw Parts for Farm Machinery
Park, Dong-Hwan;Han, Seong-Chul;
/
The Korean Society of Manufacturing Technology Engineers
, v.24, no.5, pp.489-495,
|
|
| 4 |
Calibration Methods for Measurement Uncertainty of Power Assembly Tools
Oh, Se-heon;Kang, Ki-young;Hong, Min-sung;
/
The Korean Society of Manufacturing Technology Engineers
, v.24, no.5, pp.496-501,
|
|
| 5 |
Characterization of Microscale Drilling Process for Functionally Graded M2-Cu Material Using Design of Experiments
Sim, Jongwoo;Choi, Dae Cheol;Shin, Ki-Hoon;Kim, Hong Seok;
/
The Korean Society of Manufacturing Technology Engineers
, v.24, no.5, pp.502-507,
|
|
| 6 |
Analysis on the Effects of Tool Rake Angle and Helix Angle of a Flat End-mill in the Milling of Ti-alloy
Ye, Dong-Hee;Koo, Joon-Young;Park, Young-Koon;Kim, Jeong-Suk;
/
The Korean Society of Manufacturing Technology Engineers
, v.24, no.5, pp.508-513,
|
|
| 7 |
The Influence of Suspension Stiffness on the Gearbox Input Loads in a 3-Point Suspension Wind Turbine Drive Train
Nam, Ju Seok;Nam, Yong Yun;
/
The Korean Society of Manufacturing Technology Engineers
, v.24, no.5, pp.514-520,
|
|
| 8 |
Reliability Assessment Criteria of Motorized Roller Conveyor
Kim, Young-Joo;Go, Hee-Yang;Han, In-Sup;Kim, Yong Soo;
/
The Korean Society of Manufacturing Technology Engineers
, v.24, no.5, pp.521-529,
|
|
| 9 |
Development of 20-kHz Ultrasonic Equipment for UNSM
Shin, Hyun-Geun;Kim, Hyunse;Lim, Euisu;
/
The Korean Society of Manufacturing Technology Engineers
, v.24, no.5, pp.530-534,
|
|
| 10 |
Thermal Stress Calculations Using Enhanced Green's Function Considering Temperature-dependent Material Properties
Han, Tae-Song;Huh, Nam-Su;Jeon, Hyun-Ik;Ha, Seung-Woo;Cho, Sun-Young;
/
The Korean Society of Manufacturing Technology Engineers
, v.24, no.5, pp.535-540,
|
|
| 11 |
Driving Performance Prediction for Low-floor Midsize bus Using Simulator
Kim, Gisu;Kim, Jinseong;Park, Yeong-il;Lee, Chibum;
/
The Korean Society of Manufacturing Technology Engineers
, v.24, no.5, pp.541-547,
|
|
| 12 |
Quadruped Walking Control of DRC-HUBO
Kim, Jung-Yup;
/
The Korean Society of Manufacturing Technology Engineers
, v.24, no.5, pp.548-552,
|
|
| 13 |
Closed-Form Solutions for Stress Intensity Factor and Elastic Crack Opening Displacement for Circumferential Through-Wall Cracks in the Interface between an Elbow and a Straight Pipe under Internal Pressure
Jang, Youn-Young;Jeong, Jae-Uk;Huh, Nam-Su;Kim, Ki-Seok;Cho, Woo-Yeon;
/
The Korean Society of Manufacturing Technology Engineers
, v.24, no.5, pp.553-560,
|
|
| 14 |
Design and Manufacture of Therapeutic Dolls for Pulse Measurement of Elderly Patients with Dementia
Cha, Chiyoung;Won, Seungmook;Lee, JinKyu;Kim, Seong Keol;
/
The Korean Society of Manufacturing Technology Engineers
, v.24, no.5, pp.561-567,
|
|
| 15 |
Design and Manufacture of a Hand-made Vehicle Based on a Formula
Lee, Soo Jin;Jeong, Wonsun;Kim, Geunbi;Kim, Seong Keol;
/
The Korean Society of Manufacturing Technology Engineers
, v.24, no.5, pp.568-575,
|
|
| 16 |
Component Sizing for the Hybrid Electric Vehicle (HEV) of Our Own Making Using Dynamic Programming
Kim, Gisu;Kim, Jinseong;Park, Yeong-il;
/
The Korean Society of Manufacturing Technology Engineers
, v.24, no.5, pp.576-582,
|
|
| 17 |
Development of a Half-Duplex Communication Device for Use via Human Skin
Kim, Won-Jun;Song, Kyo-Yong;Kim, Young-Pil;Ko, Dong-Young;Kim, Jung-Han;
/
The Korean Society of Manufacturing Technology Engineers
, v.24, no.5, pp.583-587,
|
|