|
| 1 |
Characteristics of Al2O3, Cr2O3, WC-Ni, and Chromizing Surface Coatingsunder Environment with HighTemperature, Wear, and Corrosion
Cho, Hee Keun;
/
The Korean Society of Manufacturing Technology Engineers
, v.22, no.6, pp.895-900,
|
|
| 2 |
Structural Analysis of Overloaded Multi-aerial Platform
So, Soo-Hyun;Kang, Sung-Soo;
/
The Korean Society of Manufacturing Technology Engineers
, v.22, no.6, pp.901-907,
|
|
| 3 |
Prediction of the Effect of Cooling Fan Electrification on City Bus
Lee, Yongkyu;Park, Jinil;Lee, Jonghwa;
/
The Korean Society of Manufacturing Technology Engineers
, v.22, no.6, pp.908-912,
|
|
| 4 |
Non-Contact Level on Air Levitation Table with Porous Chamber Array
Kim, Joon Hyun;Jeong, Young Suk;Lee, Tae Geol;Kim, Tae Hoon;Jung, Hyo Jae;
/
The Korean Society of Manufacturing Technology Engineers
, v.22, no.6, pp.913-920,
|
|
| 5 |
Production Efficiency Evaluation Considering Various Process Parameters
Kim, Chu;Cho, YongJu;Seo, Yoonho;Jo, Hyunjae;
/
The Korean Society of Manufacturing Technology Engineers
, v.22, no.6, pp.921-930,
|
|
| 6 |
Finite Element Analysis of Large-Electron-Beam Polishing-Induced Temperature Distribution
Kim, J.S.;Kim, J.S.;Kang, E.G.;Lee, S.W.;Park, H.W.;
/
The Korean Society of Manufacturing Technology Engineers
, v.22, no.6, pp.931-936,
|
|
| 7 |
Design of Non-Contact Pick-Up Head for Carrying Large Flat Sheets
Kim, Joon Hyun;Kim, Young Geul;Ahn, Sung Wook;Kim, Young Sung;
/
The Korean Society of Manufacturing Technology Engineers
, v.22, no.6, pp.937-944,
|
|
| 8 |
Research on In-vehicle, Real-time Measurement of Road Grades
Kim, Younggwan;Park, Jinil;Lee, Jonghwa;
/
The Korean Society of Manufacturing Technology Engineers
, v.22, no.6, pp.945-949,
|
|
| 9 |
Crack Detection in Beam using Sensitivity Coefficient of Modal Data
Lee, Jung Youn;
/
The Korean Society of Manufacturing Technology Engineers
, v.22, no.6, pp.950-956,
|
|
| 10 |
Development of Collision Tester for Performance Evaluation of Safety Fence in Baseball Stadiums
Han, Eui Don;Jang, Woong Ki;Kho, Sun Tak;Kwak, Ho Taek;Seo, Young Ho;Kim, Byeong Hee;
/
The Korean Society of Manufacturing Technology Engineers
, v.22, no.6, pp.957-962,
|
|
| 11 |
Impact Analysis of Freely Falling Cellular Phone
Kang, Sung-Soo;Kim, Jong-Su;Seol, Gyun-Ho;
/
The Korean Society of Manufacturing Technology Engineers
, v.22, no.6, pp.963-968,
|
|
| 12 |
Structural Durability Analysis Related to Shape and Direction of Bicycle Frames
Cho, Jaeung;Han, Moonsik;
/
The Korean Society of Manufacturing Technology Engineers
, v.22, no.6, pp.969-975,
|
|
| 13 |
Impact Characteristics of CFRP Structural Member according to the Variation of Stacking Condition and Impact Energy
Yeo, In-Goo;Choi, Ju-Ho;Choi, Yeong-Min;Yang, Yong-Jun;Hwang, Woo-Chae;Yang, In-Young;
/
The Korean Society of Manufacturing Technology Engineers
, v.22, no.6, pp.976-981,
|
|
| 14 |
Global Stage of Reproducibility Experiment for Single Point Diamond Turning
Park, Dae-Kwang;Kwak, Nam-Su;Kwon, Dae-Ju;Kim, Jae-Yeol;
/
The Korean Society of Manufacturing Technology Engineers
, v.22, no.6, pp.982-988,
|
|
| 15 |
A Study on Wear-type Defects of Part and Materials in Wind Power Generation
Kim, Sung-Hyun;Choi, Seung-Hyun;Jung, Na-Ra;Yoon, Cheon-Han;Kim, Jae-Yeol;
/
The Korean Society of Manufacturing Technology Engineers
, v.22, no.6, pp.989-995,
|
|
| 16 |
Full Duplex Robot System for Transferring Flat Panel Display Glass
Lee, Dong Hun;Lee, Chibum;Kim, Sung Dong;Cho, Young Hak;
/
The Korean Society of Manufacturing Technology Engineers
, v.22, no.6, pp.996-1002,
|
|
| 17 |
Prediction of Cutting Forces and Estimation of Size Effects in End Milling Operations by Determining Instantaneous Cutting Force Constants
Kim, Hong Seok;
/
The Korean Society of Manufacturing Technology Engineers
, v.22, no.6, pp.1003-1009,
|
|
| 18 |
Novel Methods for Spatial Position Control of a Plate In the Conductive Plate Conveyance System Using Magnet Wheels
Jung, Kwang Suk;
/
The Korean Society of Manufacturing Technology Engineers
, v.22, no.6, pp.1010-1017,
|
|
| 19 |
Addendum Surface Modeling in Draw Die Design for Stamping Automotive Panels
Chung, Yunchan;
/
The Korean Society of Manufacturing Technology Engineers
, v.22, no.6, pp.1018-1024,
|
|
| 20 |
Method of Controlling CAD Library Based on Part-shape Information Model for Bicycle Configuration Designs
Myung, B.S.;Lee, J.;Kim, B.C.;Mun, D.;Lee, H.;Park, S.W.;
/
The Korean Society of Manufacturing Technology Engineers
, v.22, no.6, pp.1025-1031,
|
|