|
| 1 |
Mechatronic Analysis for Feeding a Structure of a Machine Tool Using Multi-body Dynamics
Choi, Jin-Woo;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.691-696,
|
|
| 2 |
Modeling for a Coke Dry Quenching Process Using a Theory of a Porous Material
Kim, Joo-Han;Lee, Yong-Ju;Kim, Ki-Seok;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.697-701,
|
|
| 3 |
Linear Drive Systems using Roller Gear Mechanism
Kim, Chang-Hyun;Nam, Hyoung-Chul;Kwon, Soon-Man;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.702-707,
|
|
| 4 |
Indented Surface Configuration and its Volume Calculation
Yang, Jae-Yong;Yoon, Moon-Chul;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.708-713,
|
|
| 5 |
Micro Polishing Force Control of the Polishing Machine with the Airbag Tool
Lee, Ho-Cheol;Lee, Chang-Eun;Je, Tae-Jin;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.714-719,
|
|
| 6 |
Effectiveness of the Electrochemical Sensor for the Free Chlorine Measurement
Kim, Hong-Won;Chung, Nam-Yong;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.720-725,
|
|
| 7 |
Analysis of Error Rate in the Variations of Shearing Amount in Measuring the Internal Defect using a Shearography
Hong, Kyung-Min;Kang, Young-June;Choi, In-Young;Ahn, Yong-Jin;Yoon, Suk-Bum;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.726-732,
|
|
| 8 |
Evaluation on Structural Stability According to Steering Wheel Type
Han, Moon-Sik;Cho, Jae-Ung;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.733-740,
|
|
| 9 |
A Study on the Load Carrying Capacity and Equivalence Friction Coefficient of a Textured Plane Bearing with Semi-spherical Dimples and Semi-ellipsoidal Dimples
Lee, Soo-Young;Kim, Pil-Kee;Seok, Jong-Hyuk;Seok, Jong-Won;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.741-746,
|
|
| 10 |
Stress Analysis on a Structure of Solar Tracker Subjected to Wind Load
Kim, Yong-Woo;Kim, Won-Bong;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.747-754,
|
|
| 11 |
Analysis of the Effects of Cutting Force and Surface Roughness in the Cutting Conditions of Plasma Source Ion Implantation Tools
Kang, Seong-Ki;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.755-760,
|
|
| 12 |
Investigation of Polishing Characteristics of Fused Silica Glass Using MR Fluid Jet Polishing
Lee, Jung-Won;Cho, Yong-Kyu;Cho, Myeong-Woo;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.761-766,
|
|
| 13 |
Development of an Injection Nozzle and an Electromagnet Module for a MR Fluid Jet Polishing System
Lee, Jung-Won;Cho, Yong-Kyu;Ha, Seok-Jae;Shin, Bong-Cheol;Cho, Myeong-Woo;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.767-772,
|
|
| 14 |
A Study on Water Droplet Lens Effect of UV Laser Micromachining Process
Shin, Bo-Sung;Lee, Jung-Han;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.773-777,
|
|
| 15 |
A Study on the Characteristics of the Clutch Automation Mechanism of Hybrid Vehicles
Lim, Won-Sik;Park, Sung-Cheon;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.778-783,
|
|
| 16 |
Prediction of Crack Initiation and Design of 40kHz Blade Horn for Ultrasonic Cutting
Seo, Jeong-Seok;Lee, Yoon-Jung;Beak, Si-Young;Park, Dong-Sam;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.784-789,
|
|
| 17 |
An Experimental Study on Cutting Process using High Pressure Injection Holder
Chung, Sang-Wan;Jeong, In-Guk;Yi, Chung-Seob;Song, Chul-Ki;Suh, Jeong-Se;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.790-796,
|
|
| 18 |
A Study of Optimal Design for Mg Armrest Frame by using Response Surface Method
Kim, Eun-Sung;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.797-804,
|
|
| 19 |
Development of a Fan Simulator Using Supercomputer
Kim, Myung-Il;Kim, Seung-Hae;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.805-813,
|
|
| 20 |
A Study on the Monitoring of Laser Welding for S45C Steel Sheets Using Nd:YAG Laser with Continuous Waves
Kim, Do-Hyoung;Shin, Ho-Jun;Yoo, Young-Tae;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.814-823,
|
|
| 21 |
A Study on Roundness Improvement of Heat-treated Large Diameter Aluminum Tube-turning with Collet Type Jig
Kim, Pyeong-Ho;Lim, Hak-Jin;Lee, Jung-Min;Lee, Jong-Hwan;Kim, Jung-Suk;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.824-829,
|
|
| 22 |
An Evaluation of the Fatigue Properties for External Panel Using Low Density SMC
Kim, Eun-Sung;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.830-835,
|
|
| 23 |
The Research on Environmental-Friendly Manhole Repair and Construction Technology
Seo, Jeong-Hwan;Yang, Hae-Jeong;Kim, Kwang;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.836-841,
|
|
| 24 |
Machining Optimization of Al7075-T0 Turning Process Considering Surface Roughness and Cutting Forces
Jeong, Ji-Hoon;Kim, Jeong-Suk;Kim, Pyeong-Ho;Koo, Joon-Young;Im, Hak-Jin;Lee, Jong-Hwan;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.842-847,
|
|
| 25 |
Evaluation Tool Life and Cutting Characteristics of Carbide Hob TiAlN Coating Surface Polishing Using Aero Lap Polishing Technology and Multi-con
Cheon, Jong-Pil;Pyoun, Young-Sik;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.5, pp.848-854,
|
|