|
| 1 |
Design of a Condenser Lens System using a Thin Lens Combination
Lim, Sun-Jong;Choi, Ji-Yeon;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.517-522,
|
|
| 2 |
Minimization of Pattern Size on Polycarbonate Material in V-grooving
Kim, Gi-Dae;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.523-527,
|
|
| 3 |
Study on Structural Safety Analysis of EGR Valve
Han, Moon-Sik;Cho, Jae-Ung;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.528-534,
|
|
| 4 |
Effects of Mixing Chamber Shape on Cutting Performance in AWJ
Lee, Hyo-Ryeol;Kwak, Yong-Kil;Kim, Hwa-Young;Ahn, Jung-Hwan;Yeo, Myeong-Heon;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.535-540,
|
|
| 5 |
Numerical Study on Thermal Deformation of AC4C and AC7A Casting Material
Yoon, Hee-Sung;Oh, Yool-Kwon;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.541-546,
|
|
| 6 |
Optimal Flow Design of High-Efficiency, Cold-Flow, and Large-size Heat Pump Dryer
Park, Sang-Jun;Lee, Young-Lim;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.547-552,
|
|
| 7 |
Safety Estimation of High Pressure Drop Control Valve for Offshore Structures
Kim, Jae-Woong;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.553-558,
|
|
| 8 |
Dynamic Reliability of Board Level by Changing the Design Parameters of Flip Chips
Kim, Seong-Keol;Lim, Eun-Mo;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.559-563,
|
|
| 9 |
A Study of Welding Conditions for Plastic Piping
Lee, C.K.;Lee, W.R.;Park, C.Y.;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.564-569,
|
|
| 10 |
The Establishment of Bonding Conditions of Cu Using an Ultrasonic Metal Welder
Jang, Ho-Su;Park, Woo-Yeol;Park, Dong-Sam;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.570-575,
|
|
| 11 |
Deformation Analysis for Dust Cap of Automotive Wheel Bearing
Lee, Seung-Pyo;Lee, In-Ha;Kim, Bong-Chul;Jin, Sung-Kyu;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.576-581,
|
|
| 12 |
Finite Element Analysis on the Cold Forging Process of the Unified Universal Shaft Joint for the Automobile
Kwon, Hyuk-Hong;Song, Seung-Eun;Kim, Oh-Seung;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.582-588,
|
|
| 13 |
Optimal Tuning of a Ballscrew Driven Biaxial Servo System
Shin, Dong-Soo;Chung, Sung-Chong;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.589-597,
|
|
| 14 |
A Study on The Crash Analysis of Guard Rail
Min, Han-Ki;Jung, Jong-An;Kim, Taeg;Gook, Jin-Seon;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.598-604,
|
|
| 15 |
Thrust Enhancement through a Tandem Mode of Flapping Wing in Micro Flow
Jang, Sung-Min;Maeng, Joo-Sung;An, Sang-Joon;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.605-611,
|
|
| 16 |
An Experimental Study on Noise Characteristics of Fuel Pump System
Sa, Jong-Sung;Kang, Tea-Won;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.612-617,
|
|
| 17 |
Dislocation Density Propagation adjacent to the Low Angle Grain Boundaries of Polycrystalline Materials
Ma, Jeong-Beom;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.618-622,
|
|
| 18 |
Development and Mass Production Potential of a Novel 5-side Photodiode LED Viewing Angle Measurement System
Kim, Dee-Wan;Park, Chan-Hee;Kim, Keun-Sik;Kim, Cheol-Sang;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.623-631,
|
|
| 19 |
A Study on the Characteristics of Material removal using a Round endmill Type MR Polishing System for 3D Shape
Hong, Kwang-Pyo;Shin, Bong-Cheol;Kim, Dong-Woo;Cho, Myeong-Woo;Je, TAe-Jin;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.632-638,
|
|
| 20 |
Characteristics Analysis of Automatic Transmission for the Wheel-Loader with Shift Control Algorithm
Oh, Joo-Young;Yun, Ung-Kwon;Park, Young-Jun;Lee, Geun-Ho;Song, Chang-Seop;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.639-645,
|
|
| 21 |
A Study on Laser Surface Treatment Characteristics of High Carbon Steel(HP4MA) for Injection Mold
Hwang, Hyun-Tae;Choi, Hung-Won;Kim, Jong-Do;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.646-652,
|
|
| 22 |
Development of Automatic Packing System of One Station for Fasteners(II) : Packing System Manufacture and Performance Test
Kim, Yong-Seok;Jeong, Chan-Se;Yang, Soon-Young;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.653-658,
|
|
| 23 |
A Study on the Improvement of Double Injection-molding Keypad Process
Hong, Min-Sung;Lee, Ji-Hoon;Shin, Soo-Hyun;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.659-665,
|
|
| 24 |
Development of Automatic Precision Inspection System for Defect Detection of Photovoltaic Wafer
Baik, Seung-Yeb;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.666-672,
|
|
| 25 |
A Diesel Power Sharing Algorithm for Wind-Diesel Hybrid Electric Power Generation Systems
Nam, Yong-Youn;Lee, Geun-Ho;Han, Jeong-Woo;Park, Young-Jun;Lee, Young-Soo;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.5, pp.673-678,
|
|