|
1 |
2.5D Quick Turnaround Engraving System through Recognition of Boundary Curves in 2D Images
Shin, Dong-Soo;Chung, Sung-Chong;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.369-375,
|
|
2 |
Performance Analysis of the Rubber Belt type CVT System
Kim, Sung-Mo;Zheng, Chun-Hua;Lim, Won-Sik;Cha, Suk-Won;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.376-381,
|
|
3 |
An Experimental Study of Ultra-Precision Turning of Optical Glass(BK7)
Kim, Min-Jae;Lee, June-Key;Yun, Yeong-Gon;Lee, Hyeon-Sung;Hwang, Yeon;Kim, Hye-Jeong;Kim, Jeong-Ho;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.382-385,
|
|
4 |
A Study on the Practicality of Vision Control Scheme used for Robot's Point Placement task in Discontinuous Trajectory
Son, Jae-Kyeong;Jang, Wan-Shik;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.386-394,
|
|
5 |
Nanomachining on Single Crystal Silicon Wafer by Ultra Short Pulse Electrochemical Oxidation based on Non-contact Scanning Probe Lithography
Lee, Jeong-Min;Kim, Sun-Ho;Kim, Tack-Hyun;Park, Jeong-Woo;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.395-400,
|
|
6 |
Numerical Study on the Stress Safety of a Cylinder for an Injection Molding Machine
Kim, Chung-Kyun;Kim, Kyung-Seob;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.401-406,
|
|
7 |
The Characteristics of Line Heating Using Hydrox Gas
Kim, Hong-Gun;Kwac, Lee-Ku;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.407-411,
|
|
8 |
Comparative Study on Reliability-Based Topology Optimization
Cho, Kang-Hee;Hwang, Seung-Min;Park, Jae-Yong;Han, Seog-Young;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.412-418,
|
|
9 |
An analytical Machining models based on Flow Stress Properties for Non-Heat Treated and Heat Treated AISI 4140 Steel
Lee, Tae-Hong;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.419-426,
|
|
10 |
Strength and Fatigue Analysis of Universal Joint
Cho, Jae-Ung;Han, Moon-Sik;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.427-433,
|
|
11 |
A Study on Welding of Dissimilar Materials for Van-Ramp Design and Production
Lee, Jung-Hyun;Kim, In-Cheol;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.434-439,
|
|
12 |
Kinetic Energy Recovery System for Electric Vehicles
Shin, Eung-Soo;Bang, Jae-Keun;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.440-445,
|
|
13 |
Vibration Analysis for a Feeding Unit of Vision Inspection System of Precision Screws
Seo, Ye-Rin;Park, Keun;Kim, Seong-Keol;Ra, Seung-Wu;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.446-451,
|
|
14 |
The Optimization of an Operating Dental LED Light Source Module
Jung, Yeon-Oh;Hong, Gi-Tae;Kim, Jae-Yeol;Kim, Sung-Hyun;An, Young-Jin;Han, Jae-Ho;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.452-457,
|
|
15 |
Structural Modeling and Characteristic Analysis of Container Handling System
Kim, Young-Sang;Maeng, Hee-Young;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.458-463,
|
|
16 |
A Study on the Acoustic-Field Analysis of the Suction Housing using the Reverse Engineering
Yang, Jeong-Jik;Lee, Dong-Ju;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.464-471,
|
|
17 |
Fabrication of Micro-Lens Array with Long Focal Length for Confocal Microscopy
Kim, Gee-Hong;Lim, Hyung-Jun;Jeong, Mi-Ra;Lee, Jae-Jong;Choi, Kee-Bong;Lee, Hyung-Seok;Do, Lee-Mi;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.472-477,
|
|
18 |
Influence of Nickel Alloy Weld on the Mold Surface Cracks
Jeong, Hyae-Dong;Lee, Ji-Hoon;Hong, Min-Sung;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.478-483,
|
|
19 |
Development of eco-environmental Aluminium Fuel Filler Neck using Laser welding
Lee, Byung-Jin;Jeong, Sang-Yeong;Hwang, Hyun-Tae;Jeong, Hak-Soon;Choi, Hung-Won;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.484-489,
|
|
20 |
A Study on the Strength Evaluation of Thin Wall Molding
Kim, Ok-Rae;Woo, Chang-Ki;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.490-494,
|
|
21 |
An Evaluation of Factors on the Influence Roundness in Turning Based on the Taguchi Method
Kang, Shin-Gil;Lee, Chang-Ho;Jang, Sung-Min;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.495-501,
|
|
22 |
Development of A Feeding Device for Screw/Bolt Using the Sliding Method
Kim, Yong-Seok;Jeong, Chan-Se;Yang, Soon-Young;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.502-508,
|
|
23 |
Economic Assessment and Application of AHP for Determining the Design of Assembly Line for the Lens Module of Mobile Phone
Moon, Dug-Hee;Lee, Geun-Hyun;Song, Jun-Yeob;
/
The Korean Society of Manufacturing Technology Engineers
, v.20, no.4, pp.509-515,
|
|