|
| 1 |
Estimation of Transformation Temperatures in Ti-Ni-Pd Shape Memory Alloys
Narayana, P.L.;Kim, Seong-Woong;Hong, Jae-Keun;Reddy, N.S.;Yeom, Jong-Taek;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.919-925,
|
|
| 2 |
Microstructure Evolution During Solidification of Cu-Zr-Ti Alloy Forming B2 Phase Particles Embedded in a Glassy Matrix
Kim, Byoung Jin;Yun, Young Su;Kim, Won Tae;Kim, Do Hyang;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.926-933,
|
|
| 3 |
Matrix Transformation in Boron Containing High-Temperature Co-Re-Cr Alloys
Strunz, Pavel;Mukherji, Debashis;Beran, Premysl;Gilles, Ralph;Karge, Lukas;Hofmann, Michael;Hoelzel, Markus;Rosler, Joachim;Farkas, Gergely;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.934-944,
|
|
| 4 |
Effect of TiC Nanoparticles Supported by Ti Powders on the Solidification Behavior and Microstructure of Pure Aluminum
Zhao, Bingyi;Cai, Qizhou;Li, Xinwei;Li, Bing;Cheng, Jingfan;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.945-954,
|
|
| 5 |
Modeling Deformation Flow Curves and Dynamic Recrystallization of BA-160 Steel During Hot Compression
Shahriari, Babak;Vafaei, Reza;Sharif, Ehsan Mohammad;Farmanesh, Khosro;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.955-969,
|
|
| 6 |
Effect of Hierarchical Microstructures of Lath Martensite on the Transitional Behavior of Fatigue Crack Growth Rate
Yang, Ming;Zhong, Yi;Liang, Yi-long;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.970-980,
|
|
| 7 |
Mechanical Properties Analysis of 4340 Steel Specimen Heat Treated in Oven and Quenching in Three Different Fluids
Fakir, Rachid;Barka, Noureddine;Brousseau, Jean;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.981-991,
|
|
| 8 |
Microstructure, Tensile and Fatigue Properties of Al-5 wt.%Mg Alloy Manufactured by Twin Roll Strip Casting
Heo, Joon-Young;Baek, Min-Seok;Euh, Kwang-Jun;Lee, Kee-Ahn;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.992-1001,
|
|
| 9 |
Correlation Between the Microstructural Defects and Residual Stress in a Single Crystal Nickel-Based Superalloy During Diferent Creep Stages
Mo, Fangjie;Wu, Erdong;Zhang, Changsheng;Wang, Hong;Zhong, Zhengye;Zhang, Jian;Chen, Bo;Hofmann, Michael;Gan, Weimin;Sun, Guangai;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.1002-1011,
|
|
| 10 |
Effect of Aging Isothermal Time on the Microstructure and Room-Temperature Impact Toughness of Fe-24.8Mn-7.3Al-1.2C Austenitic Steel with κ-Carbides Precipitation
Feng, Yifan;Song, Renbo;Pei, Zhongzheng;Song, Renfeng;Dou, Guoyu;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.1012-1023,
|
|
| 11 |
Microstructure and Physical-Mechanical Properties of (TiAlSiY)N Nanostructured Coatings Under Different Energy Conditions
Smyrnova, K.V.;Pogrebnjak, A.D.;Beresnev, V.M.;Litovchenko, S.V.;Borba-Pogrebnjak, S.O.;Manokhin, A.S.;Klimenko, S.A.;Zhollybekov, B.;Kupchishin, A.I.;Kravchenko, Ya. O.;Bondar, O.V.;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.1024-1035,
|
|
| 12 |
Characterization on White Etching Layer Formed During Ceramic Milling of Inconel 718
Kruk, A.;Wusatowska-Sarnek, A.M.;Zietara, M.;Jemielniak, K.;Siemiatkowski, Z.;Czyrska-Filemonowicz, A.;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.1036-1045,
|
|
| 13 |
Effect of Precipitate State on Mechanical Properties, Corrosion Behavior, and Microstructures of Al-Zn-Mg-Cu Alloy
Peng, Xiaoyan;Li, Yao;Xu, Guofu;Huang, Jiwu;Yin, Zhimin;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.1046-1057,
|
|
| 14 |
Microstructure and Tensile/Corrosion Properties Relationships of Directionally Solidifed Al-Cu-Ni Alloys
Rodrigues, Adilson V.;Lima, Thiago S.;Vida, Talita A.;Brito, Crystopher;Garcia, Amauri;Cheung, Noe;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.1058-1076,
|
|
| 15 |
Effect of Various SPD Techniques on Structure and Superplastic Deformation of Two Phase MgLiAl Alloy
Dutkiewicz, Jan;Bobrowski, Piotr;Rusz, Stanislav;Hilser, Ondrej;Tanski, Tomasz A.;Borek, Wojciech;Lagoda, Marek;Ostachowski, Pawel;Palka, Pawel;Boczkal, Grzegorz;Kuc, Dariusz;Mikuszewski, Tomasz;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.1077-1089,
|
|
| 16 |
Structure and Stoichiometry of MgxZny in Hot-Dipped Zn-Mg-Al Coating Layer on Interstitial-Free Steel
Kim, Jae Nam;Lee, Chong Soo;Jin, Yung Sool;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.1090-1098,
|
|
| 17 |
The Microstructure and Tensile Properties of a Newly Developed Mg-Al/Mg3Sb2 In Situ Composite in As-Cast and Extruded Conditions
Montajabnia, A.;Pourbahari, B.;Emamy, M.;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.1099-1111,
|
|
| 18 |
Alloying Behavior and Properties of FeSiBAlNiCox High Entropy Alloys Fabricated by Mechanical Alloying and Spark Plasma Sintering
Wang, Wen;Li, Boyu;Zhai, Sicheng;Xu, Juan;Niu, Zuozhe;Xu, Jing;Wang, Yan;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.1112-1119,
|
|
| 19 |
Microstructural Evolution of HSLA ISO 3183 X80M (API 5L X80) Friction Stir Welded Joints
Hermenegildo, Tahiana F.C.;Santos, Tiago F.A.;Torres, Edwar A.;Afonso, Conrado R.M.;Ramirez, Antonio J.;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.1120-1132,
|
|
| 20 |
Effects of Ti and La Additions on the Microstructures and Mechanical Properties of B-Refined and Sr-Modifed Al-11Si Alloys
Li, Chenlin;Pan, Ye;Lu, Tao;Jing, Lijun;Pi, Jinhong;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.1133-1142,
|
|
| 21 |
Computational Analysis of the Explosive Compaction Fabrication Process of Cylindrical Uni-directional Porous Copper
Nishi, Masatoshi;Oshita, Masaki;Ulbin, Miran;Vesenjak, Matej;Ren, Zoran;Hokamoto, Kazuyuki;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.1143-1148,
|
|
| 22 |
Effects of Pre-ageing on Microstructure and Mechanical Properties of T9I6 Treated 2519A Aluminium Alloy
Ye, Lingying;Dong, Yu;Liu, Shengdan;Jiang, Haichun;Sun, Daxiang;Zhang, Xinming;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.1149-1161,
|
|
| 23 |
Creep Properties of Squeeze-Infiltrated Carbon Nanotube and Aluminum Borate Whisker Reinforced AS52 Mg Metal Matrix Composites
Park, Sang Hyun;Cho, Dae Hyun;Cho, Kyung Mox;Park, Ik Min;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.1162-1171,
|
|
| 24 |
Electroless Cu/Ni Plating on Graphite Flake and the Effects to the Properties of Graphite Flake/Si/Al Hybrid Composites
Huang, Ying;Peng, Xuanyi;Yang, Yiwen;Wu, Haiwei;Sun, Xu;Han, Xiaopeng;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.1172-1180,
|
|
| 25 |
Development of a Hydrogen Uptake-Release Mg-Based Alloy by Adding a Polymer CMC (Carboxymethylcellulose, Sodium Salt) via Reaction-Accompanying Milling
Kwak, Young Jun;Choi, Eunho;Song, Myoung Youp;
/
The Korean Institute of Metals and Materials
, v.24, no.5, pp.1181-1190,
|
|