|
1 |
Microstructural Control of Ti-Al-Mo-Nb Alloy System With Respect to Variation of B
Kim, Minseok;Choi, Kwangsoo;Zhu, Jun;Zhang, Fan;Song, Youngbuem;Kim, Youngwon;Yi, Seonghoon;Park, Joon Sik;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.625-631,
|
|
2 |
Effect of Si Addition on Secondary Hardening of Alloy Steels
Cho, Ki Sub;Kwon, Hoon;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.632-638,
|
|
3 |
Microstructure and Hot Deformation Behavior of A356/Al2O3 Composite Fabricated by Infiltration Method
Yu, Seung-Baek;Jeon, Kyung-Soo;Kim, Mok-Soon;Lee, Jeung-Keun;Ryu, Kwan-Ho;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.639-647,
|
|
4 |
Effects of Cooling Rate and Stabilization Annealing on Fatigue Behavior of β-Processed Ti-6Al-4V Alloys
Seo, Wongyu;Jeong, Daeho;Lee, Dongjun;Sung, Hyokyung;Kwon, Yongnam;Kim, Sangshik;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.648-659,
|
|
5 |
Constitutive Modeling and Understanding of the Hot Compressive Deformation of Mg-9.5Zn-2.0Y Magnesium Alloy With Reduced Number of Strain-Dependent Constitutive Parameters
Kim, Woo Jin;Kwak, Tae Yang;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.660-672,
|
|
6 |
Effects of Microcrack Evolution on the Electrical Resistance of Cu Thin Films on Flexible PI Substrates During Cyclic-Bend Testing
Bag, Atanu;Park, Ki-Seong;Choi, Shi-Hoon;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.673-682,
|
|
7 |
Tension-Compression Asymmetry of a Rolled Mg-Y-Nd Alloy
Song, Bo;Pan, Hucheng;Ren, Weijie;Guo, Ning;Wu, Zehong;Xin, Renlong;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.683-690,
|
|
8 |
Tribological and Mechanical Properties of Deep Cryogenically Treated Medium Carbon Micro Alloy Steel
Kaya, Esad;Ulutan, Mustafa;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.691-698,
|
|
9 |
Improving Significantly the Failure Strain and Work Hardening Response of LPSO-Strengthened Mg-Y-Zn-Al Alloy via Hot Extrusion Speed Control
Tan, Xinghe;Chee, Winston;Chan, Jimmy;Kwok, Richard;Gupta, Manoj;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.699-707,
|
|
10 |
Alloying Effect of Copper Concentration on the Localized Corrosion of Aluminum Alloy for Heat Exchanger Tube
Hong, Min-Sung;Park, In-Jun;Kim, Jung-Gu;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.708-714,
|
|
11 |
Influences of Carbon and Silicon on Blister Formation in Scale Surface During High Temperature Oxidation of Carbon Steels
Kim, Deuk-Jung;Lee, Jae-Sang;Koo, Yang-Mo;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.715-719,
|
|
12 |
High-Temperature Oxidation of AZ91-0.3%Ca-0.1%Y Alloy in Air
Lee, Dong Bok;Abro, Muhammad Ali;You, Bong Sun;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.720-725,
|
|
13 |
Effect of Different Microstructural Parameters on Hydrogen Induced Cracking in an API X70 Pipeline Steel
Mohtadi-Bonab, M.A.;Eskandari, M.;Karimdadashi, R.;Szpunar, J.A.;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.726-735,
|
|
14 |
Evaluation of the Ductile-to-Brittle Transition Temperature of a Silicon Steel Under Various Strain Rate Conditions With a Servo-Hydraulic High Speed Testing Machine
Kwon, Junbeom;Huh, Hoon;Kim, Jae-song;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.736-744,
|
|
15 |
Effects of Zn Content and Initial Grain Size on Double Peak Basal Textures of Mg-Zn-Al Alloys
Choi, Jung Woo;Shin, Kwang Seon;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.745-755,
|
|
16 |
Correlation of Eddy Current Responses Between Fatigue Cracks and Electrical-Discharge-Machining Notches
Seo, Sukho;Choi, Gyudong;Eom, Tae Jhoun;Lee, Bokwon;Lee, Soo Yeol;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.756-763,
|
|
17 |
Numerical Simulation of Hydrogen Desorption From High-Density Metal Hydride Hydrogen Storage Vessels
O, Sang-Kun;Yi, Kyung-Woo;Cho, Sung-Wook;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.764-769,
|
|
18 |
Mechanical Characteristics of a Tool Steel Layer Deposited by Using Direct Energy Deposition
Baek, Gyeong Yun;Shin, Gwang Yong;Lee, Eun Mi;Shim, Do Sik;Lee, Ki Yong;Yoon, Hi-Seak;Kim, Myoung Ho;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.770-777,
|
|
19 |
Effect of Mo on Dynamic Recrystallization and Microstructure Development of Microalloyed Steels
Schambron, Thomas;Dehghan-Manshadi, Ali;Chen, Liang;Gooch, Taliah;Killmore, Chris;Pereloma, Elena;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.778-787,
|
|
20 |
Structure and Refinement Performance of Al-5Ti-0.2C Master Alloy Produced via an Improved Self Propagating Synthesis Approach
Svynarenko, Kateryna;Zhang, Yubo;Jie, Jinchuan;Kutsova, Valentyna;Li, Tingju;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.788-797,
|
|
21 |
Effect of the Cr2O3 and TiO2 as Nucleating Agents in SiO2-Al2O3-CaO-MgO Glass-Ceramic System
Back, Gu-Seul;Yoon, Mi-Jung;Jung, Woo-Gwang;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.798-804,
|
|
22 |
Tensile Property Improvement in Ti/Al Clad Sheets Fabricated by Twin-Roll Casting and Annealing
Lee, Dong Ho;Kim, Jung-Su;Song, Hyejin;Lee, Sunghak;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.805-812,
|
|
23 |
Microstructural and Mechanical Characterization of Hybrid Aluminum Matrix Composite Containing Boron Carbide and Al-Cu-Fe Quasicrystals
Khan, Mahmood;Zulfaqar, Muhammad;Ali, Fahad;Subhani, Tayyab;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.813-822,
|
|
24 |
Characterization of Al/Crystallized Al-Based Metallic Glass Composites Produced by Repeated Roll Bonding Process
Alizadeh, Morteza;Khoramkhorshid, Saba;Taghvaei, Amir Hossein;Gokuldoss, Prashanth Konda;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.823-830,
|
|
25 |
Dehydrogenation Properties and Mechanisms of MgH2-NiCl2 and MgH2-NiCl2-Graphene Hydrogen Storage Composites
Zhang, J.;Qu, H.;Yan, S.;Yin, L.R.;Zhou, D.W.;
/
The Korean Institute of Metals and Materials
, v.23, no.4, pp.831-837,
|
|