|
1 |
Parametric study of propeller boss cap fins for container ships
Lim, Sang-Seop;Kim, Tae-Won;Lee, Dong-Myung;Kang, Chung-Gil;Kim, Soo-Young;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.187-205,
|
|
2 |
Numerical simulations of two-dimensional floating breakwaters in regular waves using fixed cartesian grid
Jeong, Kwang-Leol;Lee, Young-Gill;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.206-218,
|
|
3 |
Numerical analysis of two and three dimensional buoyancy driven water-exit of a circular cylinder
Moshari, Shahab;Nikseresht, Amir Hossein;Mehryar, Reza;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.219-235,
|
|
4 |
Damage scenarios and an onboard support system for damaged ships
Choi, Jin;Lee, Dongkon;Kang, Hee Jin;Kim, Soo-Young;Shin, Sung-Chul;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.236-244,
|
|
5 |
A study on an efficient prediction of welding deformation for T-joint laser welding of sandwich panel Part II : Proposal of a method to use shell element model
Kim, Jae Woong;Jang, Beom Seon;Kang, Sung Wook;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.245-256,
|
|
6 |
Flow-driven rotor simulation of vertical axis tidal turbines: A comparison of helical and straight blades
Le, Tuyen Quang;Lee, Kwang-Soo;Park, Jin-Soon;Ko, Jin Hwan;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.257-268,
|
|
7 |
Verification of CFD analysis methods for predicting the drag force and thrust power of an underwater disk robot
Joung, Tae-Hwan;Choi, Hyeung-Sik;Jung, Sang-Ki;Sammut, Karl;He, Fangpo;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.269-281,
|
|
8 |
An iterative boundary element method for a wing-in-ground effect
Kinaci, Omer Kemal;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.282-296,
|
|
9 |
Simulating three dimensional wave run-up over breakwaters covered by antifer units
Najafi-Jilani, A.;Niri, M. Zakiri;Naderi, Nader;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.297-306,
|
|
10 |
Research of design challenges and new technologies for floating LNG
Lee, Dong-Hyun;Ha, Mun-Keun;Kim, Soo-Young;Shin, Sung-Chul;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.307-322,
|
|
11 |
Modeling of steady motion and vertical-plane dynamics of a tunnel hull
Chaney, Christopher S.;Matveev, Konstantin I.;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.323-332,
|
|
12 |
Self-similarity in the equation of motion of a ship
Lee, Gyeong Joong;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.333-346,
|
|
13 |
Design of an adaptive backstepping controller for auto-berthing a cruise ship under wind loads
Park, Jong-Yong;Kim, Nakwan;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.347-360,
|
|
14 |
Experimental investigation of frictional resistance reduction with air layer on the hull bottom of a ship
Jang, Jinho;Choi, Soon Ho;Ahn, Sung-Mok;Kim, Booki;Seo, Jong Soo;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.363-379,
|
|
15 |
A numerical study of scale effects on performance of a tractor type podded propeller
Choi, Jung-Kyu;Park, Hyoung-Gil;Kim, Hyoung-Tae;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.380-391,
|
|
16 |
Hydrodynamic optimization of twin-skeg LNG ships by CFD and model testing
Kim, Keunjae;Tillig, Fabian;Bathfield, Nicolas;Liljenberg, Hans;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.392-405,
|
|
17 |
Optimization of energy saving device combined with a propeller using real-coded genetic algorithm
Ryu, Tomohiro;Kanemaru, Takashi;Kataoka, Shiro;Arihama, Kiyoshi;Yoshitake, Akira;Arakawa, Daijiro;Ando, Jun;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.406-417,
|
|
18 |
A RANS modelling approach for predicting powering performance of ships in waves
Winden, Bjorn;Turnock, Stephen;Hudson, Dominic;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.418-430,
|
|
19 |
On the effects of hull-girder vibration upon fatigue strength of a Post-Panamax container ship disaggregated by short-term sea state
Fukasawa, Toichi;Mukai, Keiichi;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.431-441,
|
|
20 |
Assessment of whipping and springing on a large container vessel
Barhoumi, Mondher;Storhaug, Gaute;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.442-458,
|
|
21 |
Application of welding simulation to block joints in shipbuilding and assessment of welding-induced residual stresses and distortions
Fricke, Wolfgang;Zacke, Sonja;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.459-470,
|
|
22 |
New business opportunity: Green field project with new technology
Lee, Seung Jae;Woo, Jong Hun;Shin, Jong Gye;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.471-483,
|
|
23 |
The use of network theory to model disparate ship design information
Rigterink, Douglas;Piks, Rebecca;Singer, David J.;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.484-495,
|
|
24 |
Scenario based optimization of a container vessel with respect to its projected operating conditions
Wagner, Jonas;Binkowski, Eva;Bronsart, Robert;
/
The Society of Naval Architects of Korea
, v.6, no.2, pp.496-506,
|
|