|
| 1 |
Standardization for Temperature Distribution Prediction of the Arc Weld using FEA
용접강도연구위원회;
/
The Korean Welding and Joining Society
, v.23, no.6, pp.1-7,
|
|
| 2 |
Review on the International Joint Researches for Evaluation of Welding Residual Stresses
Kim Jong-Sung;Park June-Soo;Jin Tae-Eun;
/
The Korean Welding and Joining Society
, v.23, no.6, pp.8-17,
|
|
| 3 |
General Guide for Hot Spot Stress Analysis
용접강도연구위원회;
/
The Korean Welding and Joining Society
, v.23, no.6, pp.18-28,
|
|
| 4 |
A Review on the International Effects for the Fatigue Strength Assessment of Welded Structures
Kim Myung-Hyun;Kim Yoo-Il;
/
The Korean Welding and Joining Society
, v.23, no.6, pp.29-36,
|
|
| 5 |
Characteristics of Fatigue Crack Propagations with Respect to Loading Directions in Butt-Welded Steel Plates with the Same Direction of Rolling and Welding Bead
Lee Yong-Bok;Kim Sung-Yeup;Oh Byung-Duck;
/
The Korean Welding and Joining Society
, v.23, no.6, pp.37-42,
|
|
| 6 |
Laser Welding of Seal Tube for Instrumented Irradiation Fuel Test
Kim Soo-Sung;Lee Chul-Yong;Kim Woong-Ki;Park Geun-Il;Koh Jinh-Yun;Seo Jun-Seok;
/
The Korean Welding and Joining Society
, v.23, no.6, pp.43-48,
|
|
| 7 |
A Study on the Resistance Welding of Metallic Sandwich Panel : Part 1 - Determination of Process Parameters
Lee Sang-Min;Kim Jin-Beom;Na Suck-Joo;
/
The Korean Welding and Joining Society
, v.23, no.6, pp.49-54,
|
|
| 8 |
A Study on the Resistance Welding of Metallic Sandwich Panel : Part 2 - Process Analysis
Lee Sang-Min;Kim Jin-Beom;Na Suck-Joo;
/
The Korean Welding and Joining Society
, v.23, no.6, pp.55-60,
|
|
| 9 |
Evaluation of Creep Crack Growth Failure Probability at Weld Interface Using Monte Carlo Simulation
Lee Jin-Sang;Yoon Kee-Bong;
/
The Korean Welding and Joining Society
, v.23, no.6, pp.61-66,
|
|
| 10 |
Effect of Spew Fillet on Failure Strength Properties of Natural Fiber Reinforced Composites Including Adhesive Bonded Joints
Yoon Ho-Chel;Choi Jun-Yong;Kim Yong-Jig;Lim Jae-Kyoo;
/
The Korean Welding and Joining Society
, v.23, no.6, pp.67-71,
|
|
| 11 |
The Evaluation of STS304 Coating Layer on S45C Substrate by Friction Surfacing Process
Noh Joong-Suk;Cho Houn-Jin;Kim Heung-Ju;Chun Chang-Gun;Chang Woong-Seong;
/
The Korean Welding and Joining Society
, v.23, no.6, pp.72-76,
|
|
| 12 |
Low Temperature Bonding Process of Silicon and Glass using Spin-on Glass
Lee Jae-Hak;Yoo Choong-Don;
/
The Korean Welding and Joining Society
, v.23, no.6, pp.77-86,
|
|
| 13 |
Evaluation of Notch Location Effect on Ductile Crack Initiation at Strength Mismatched Joints by Finite Element Method and Ultrasonic-Mechatronics System
An Gyu-Baek;Bang Han-Sur;Toyoda Masao;
/
The Korean Welding and Joining Society
, v.23, no.6, pp.87-92,
|
|
| 14 |
A Characteristics of Zn-Al-Cu System Pb-free Solder Alloys for Ultra High Temperature Applications
Kim Seong-Jun;Na Hye-Seong;Han Tae-Kyo;Lee Bong-Keun;Kang Cung-Yun;
/
The Korean Welding and Joining Society
, v.23, no.6, pp.93-98,
|
|
| 15 |
The Mixing Ratio Effect of Insert Metal Powder and Insert Brazing Powder on Microstructure of the Region Brazed on DS Ni Base Super Alloy
Ye Chang-Ho;Lee Bong-Keun;Song Woo-Young;Oh In-Seok;Kang Chung-Yun;
/
The Korean Welding and Joining Society
, v.23, no.6, pp.99-105,
|
|