|
| 1 |
Analysis of Pulsating Flow in Elastic Parallel Plates and an Elastic Pipe Model Using Moving Boundary Algorithm
Park Hyung Gyu;Kim Charn-Jung;Lee Chong-Sun;
/
The Korean Society of Mechanical Engineers
, v.29, no.4, pp.425-434,
|
|
| 2 |
Numerical Study on Polishing Behavior During Oxide CMP
Kwon Daljung;Kim Inhwan;Lee Dohyung;
/
The Korean Society of Mechanical Engineers
, v.29, no.4, pp.435-440,
|
|
| 3 |
Numerical Simulation of Natural Convection in Horizontal Enclosure with Heat-Generating Conducting Body
Lee Jae Ryong;Ha Man Yeong;
/
The Korean Society of Mechanical Engineers
, v.29, no.4, pp.441-452,
|
|
| 4 |
Characterization of submicron Particles Using a Single Particle Mass Spectrometer(I) - Non - Linear Correlation Between Particle Size and Mass Spectra Signals -
Zachariah Michael R.;Lee Donggeun;
/
The Korean Society of Mechanical Engineers
, v.29, no.4, pp.453-459,
|
|
| 5 |
Flow/Heat Transfer Analysis and Shape Optimization of a Heat Exchanger with Internally Finned Tube
Lee Juhee;Lee Sanghwan;Lim Hyo-Jae;Park Kyoungwoo;
/
The Korean Society of Mechanical Engineers
, v.29, no.4, pp.460-468,
|
|
| 6 |
Flow and Heat Transfer Analysis for the Ventilating System in Automobile Interior with a Forced Exhaust
Lee Sang-Ho;Moh Jeong-Hah;
/
The Korean Society of Mechanical Engineers
, v.29, no.4, pp.469-476,
|
|
| 7 |
A Study on the Dynamic Performance Behavior of Solid Oxide Fuel Cells with Stepwise Load Changes
Sohn Jeong Lak;Ro Sung Tack;Yang Jin Sik;
/
The Korean Society of Mechanical Engineers
, v.29, no.4, pp.477-484,
|
|
| 8 |
Heat/Mass Transfer Characteristics on Stationary Turbine Blade and Shroud in a Low Speed Annular Cascade (I) - Near-tip Blade Surface -
Rhee Dong-Ho;Cho Hyung Hee;
/
The Korean Society of Mechanical Engineers
, v.29, no.4, pp.485-494,
|
|
| 9 |
Heat/Mass Transfer Characteristics on Stationary Turbine Blade and Shroud in a Low Speed Annular Cascade (II) - Tip and Shroud -
Lee Dong-Ho;Cho Hyung Hee;
/
The Korean Society of Mechanical Engineers
, v.29, no.4, pp.495-503,
|
|
| 10 |
Study of Ceramic Sub-Micron Particle Patterning by Electro-Hydrodynamic Printing
Lee Dae-Young;Kim Sang-Yoon;Yu Tae-U;Kim Yong-Jun;Hwang Jungho;
/
The Korean Society of Mechanical Engineers
, v.29, no.4, pp.504-511,
|
|
| 11 |
Fabrication of Polycarbonate Nano Fibers Using Electrospinning
Kim Giltae;Park Sangkyoung;Lee Jaekeun;Ahn Youngchull;
/
The Korean Society of Mechanical Engineers
, v.29, no.4, pp.512-518,
|
|
| 12 |
Analysis of The Operation of a Low Temperature Differential Model Stirling Engines
Won Min Young;Jung Pyung Suk;
/
The Korean Society of Mechanical Engineers
, v.29, no.4, pp.519-525,
|
|
| 13 |
A Study on Optimized Thermal Analysis Modeling for Thermal Design Verification of a Geostationary Satellite Electronic Equipment
Jun Hyoung Yoll;Yang Koon-Ho;Kim Jung-Hoon;
/
The Korean Society of Mechanical Engineers
, v.29, no.4, pp.526-536,
|
|