|
1 |
Experimental Study on Thermophoretic Particle Deposition for an Agglomerated and Non-Agglomerated Particles
Choi, Gwang-Yul;Yoon, Jin-Uk;Ahn, Kang-Ho;
/
The Korean Society of Mechanical Engineers
, v.28, no.7, pp.741-746,
|
|
2 |
Analysis of the Thermal Processes in the Iron-Making Facility - Modeling Approach
Yang, Won;Ryu, Chang-Kook;Choi, Sang-Min;Choi, Eung-Soo;Ri, Deok-Won;Huh, Wan-Wook;
/
The Korean Society of Mechanical Engineers
, v.28, no.7, pp.747-754,
|
|
3 |
Aerodynamic Design of Three-Dimensional Wings in Ground Effect for Aero-levitation Electric Vehicle System
Oh, Hyeon-Joon;Moon, Youg-June;
/
The Korean Society of Mechanical Engineers
, v.28, no.7, pp.755-762,
|
|
4 |
Analysis of Edge Overcoating in Continuous Hot-Dip Galvanizing
Ahn, Gi-Jang;Kim, Sang-Joon;Cho, Choong-Won;Chung, Myung-Kyoon;
/
The Korean Society of Mechanical Engineers
, v.28, no.7, pp.763-770,
|
|
5 |
Hybrid Diffusion Scheme of vortex Particle Method for Early Wake Past Semicircular Cylinder
Cho, Ji-Young;Lee, Sang-Hwan;
/
The Korean Society of Mechanical Engineers
, v.28, no.7, pp.771-779,
|
|
6 |
Heat Transfer Characteristics Around a Surface-Mounted Module Cooled by Piezoelectric Fan
Park, Sang-Hee;Park, Gyu-Jin;Choi, Seong-Dae;
/
The Korean Society of Mechanical Engineers
, v.28, no.7, pp.780-788,
|
|
7 |
Effects of Corrugation Angle on Local Heat/Mass Transfer in Wavy Duct of Heat Exchanger
Jang, In-Hyuk;Hwang, San-Dong;Cho, Hyung-Hee;
/
The Korean Society of Mechanical Engineers
, v.28, no.7, pp.789-799,
|
|
8 |
Wind Tunnel Test to Enhance Aerodynamic Characteristics of Forward Swept Wing Airplane
Chung, Jin-Deog;Lee, Jang-Yeon;Sung, Bong-Zoo;Lee, Jong-Won;
/
The Korean Society of Mechanical Engineers
, v.28, no.7, pp.800-808,
|
|
9 |
Numerical Study of Flow Around Impulsively Started Elliptic Cylinder Using Vortex Particle Method
Lee, Sang-Hwan;Joo, Nam-Soo;
/
The Korean Society of Mechanical Engineers
, v.28, no.7, pp.809-817,
|
|
10 |
Flame Structure and NOx Emission Characteristics in Laminar Partially Premixed CH4/Air Flames: Effects of Fuel Split Percentage and Mixing Distance
Jeong, Yong-Ki;Lee, Jong-Ho;Lee, Suk-Young;Jeon, Chung-Hwan;Chan, Young-June;
/
The Korean Society of Mechanical Engineers
, v.28, no.7, pp.818-825,
|
|
11 |
Design and Performance Evaluation of a Portable 3-Stage Electrical Low Pressure Impactor(P-ELI) for Measurements of Submicron Aerosol
Cho, Myung-Hoon;Ji, Jun-Ho;Park, Dong-Ho;Bae, Gwi-Nam;Hwang, Jung-Ho;
/
The Korean Society of Mechanical Engineers
, v.28, no.7, pp.826-833,
|
|
12 |
Experimental Study on the Three-Dimensional Topology of Hairpin Packet Structures in Turbulent Boundary Layers
Kwon, Seong-Hun;Yoon, Sang-Youl;Kim, Kyung-Chun;
/
The Korean Society of Mechanical Engineers
, v.28, no.7, pp.834-841,
|
|
13 |
A Study on Improvement of Etching Characteristics by Spray Characteristics Analysis with Nozzle Geometries in Wet Etching Process
Jung, Ji-Won;Kim, Duck-Jool;
/
The Korean Society of Mechanical Engineers
, v.28, no.7, pp.842-849,
|
|
14 |
A Computational Study of the Impulsive Wave Discharged from a Circular Tube
Lee, Young-Ki;Kweon, Yong-Hun;Kim, Heuy-Dong;
/
The Korean Society of Mechanical Engineers
, v.28, no.7, pp.850-856,
|
|
15 |
A Study on Engine Performance Characteristics of a Homogeneous Charge Compression Ignition(HCCI) Engine According to Exhaust Gas Recirculation(EGR)
Choi, Gyeung-Ho;Han, Sung-Bin;Dibble, Robert W.;
/
The Korean Society of Mechanical Engineers
, v.28, no.7, pp.857-862,
|
|
16 |
A Study on the Soot Particle Measurement in Co-Flow Diffusion Flame Using a Laser Diagnostics and a Thermocouple
Han, Yong-Taek;Lee, Ki-Hyng;Lee, Won-Nam;
/
The Korean Society of Mechanical Engineers
, v.28, no.7, pp.863-870,
|
|
17 |
Application of CIP Method on Advection Equation by Adaptive Mesh Refinement
Yoon, Seong-Young;
/
The Korean Society of Mechanical Engineers
, v.28, no.7, pp.871-878,
|
|
18 |
Design Optimization of Three-Dimensional Channel Roughened by Oblique Ribs Using Response Surface Method
Kim, Hong-Min;Kim, Kwang-Yong;
/
The Korean Society of Mechanical Engineers
, v.28, no.7, pp.879-886,
|
|