|
1 |
Trajectory Regeneration Considering Velocity of Dynamic Obstacles Using the Nonlinear Velocity Obstacles
Moon, Chang-Bae;Chung, Woojin;
/
The Korean Society of Mechanical Engineers
, v.38, no.11, pp.1193-1199,
|
|
2 |
Development of Wheel Loader V-Pattern Operator Model for Virtual Evaluation of Working Performance
Oh, Kwangseok;Kim, Hakgu;Ko, Kyungeun;Kim, Panyoung;Yi, Kyongsu;
/
The Korean Society of Mechanical Engineers
, v.38, no.11, pp.1201-1206,
|
|
3 |
Crack-tip Stress Field of Fully Circumferential Surface Cracked Pipe Under Combined Tension and Thermal Loads
Je, Jin Ho;Kim, Dong Jun;Kim, Yun Jae;
/
The Korean Society of Mechanical Engineers
, v.38, no.11, pp.1207-1214,
|
|
4 |
Optimum Design of Latch Position and Latch Length on Operating Mechanism of a Circuit Breaker using ADAMS and VisualDOC
Cha, Hyun Kyung;Jang, Jin Seok;Yoo, Wan Suk;Sohn, Jeong Hyun;
/
The Korean Society of Mechanical Engineers
, v.38, no.11, pp.1215-1220,
|
|
5 |
Accelerated Life Evaluation of Propeller Shaft for Forklift Truck
Kim, Do-Sik;Sung, Baek-Ju;
/
The Korean Society of Mechanical Engineers
, v.38, no.11, pp.1221-1229,
|
|
6 |
Modeling and Verification of Multibody Dynamics Model of Military Vehicle Using Measured Data
Ryu, Chi Young;Jang, Jin Seok;Yoo, Wan Suk;Cho, Jin Woo;Kang, E-Sok;
/
The Korean Society of Mechanical Engineers
, v.38, no.11, pp.1231-1237,
|
|
7 |
Study on Fastened Properties by Applied to CFRP Laminates of Subminiature Screw
Choi, Byung Hui;Kim, Ho Joong;Kim, Ji Hoon;
/
The Korean Society of Mechanical Engineers
, v.38, no.11, pp.1239-1243,
|
|
8 |
Estimation of Fatigue Crack Growth using Gamma Process Model
Park, Sung Ho;Kim, Jae Hoon;
/
The Korean Society of Mechanical Engineers
, v.38, no.11, pp.1245-1256,
|
|
9 |
Estimates of Partial Safety Factors of Circumferential Through-Wall Cracked Pipes Based on Elastic-Plastic Crack Initiation Criterion
Lee, Jae-Bin;Huh, Nam-Su;
/
The Korean Society of Mechanical Engineers
, v.38, no.11, pp.1257-1264,
|
|
10 |
Progressive Failure Analysis of Adhesive Joints of Filament-Wound Composite Pressure Vessel
Kim, Junhwan;Shin, Kwangbok;Hwang, Taekyung;
/
The Korean Society of Mechanical Engineers
, v.38, no.11, pp.1265-1272,
|
|
11 |
Characteristic Analysis and Fabrication of Bioceramic Scaffold using Mixing Ratios of TCP/HA by Fused Deposition Modeling
Sa, Min-Woo;Kim, Jong Young;
/
The Korean Society of Mechanical Engineers
, v.38, no.11, pp.1273-1281,
|
|
12 |
Forensic Engineering Study on Structure Stability Evaluation of Deep Cement Mixing Vessel using ADINA Software
Kim, Eui Soo;Kim, Jong Hyuk;
/
The Korean Society of Mechanical Engineers
, v.38, no.11, pp.1283-1290,
|
|
13 |
Integrated Chassis Control with Electronic Stability Control and Active Rear Steering
Yim, Seongjin;
/
The Korean Society of Mechanical Engineers
, v.38, no.11, pp.1291-1297,
|
|
14 |
Selection and Verification of 3D Finite Element Method Model for Silicone Foot Sensor with Low Detection Pressure
Seong, Byuck Kyung;Seo, Hyung Kyu;Kim, Dong Hwan;
/
The Korean Society of Mechanical Engineers
, v.38, no.11, pp.1299-1307,
|
|
15 |
Study on Running Safety of EMS-Type Maglev Vehicle Traveling over a Switching System
Han, Jong-Boo;Lee, Jong Min;Han, Hyung-Suk;Kim, Sung-Soo;Yang, Seok-Jo;Kim, Ki-Jung;
/
The Korean Society of Mechanical Engineers
, v.38, no.11, pp.1309-1315,
|
|