|
| 1 |
Lubrication Characteristics of Micro-Textured Slider Bearing: Effect of Dimple Density
Park, Tae Jo;Lee, Joon Oh;
/
The Korean Society of Mechanical Engineers
, v.37, no.4, pp.437-442,
|
|
| 2 |
Ultrasound Thermography Technique for Detecting Micro Defects in Vehicle Engine Block
Kim, Sung Hyun;Kim, Jae Yeol;Choi, Seung Hyun;
/
The Korean Society of Mechanical Engineers
, v.37, no.4, pp.443-446,
|
|
| 3 |
Evaluation of Two Robot Vision Control Algorithms Developed Based on N-R and EKF Methods for Slender Bar Placement
Son, Jae Kyung;Jang, Wan Shik;Hong, Sung Mun;
/
The Korean Society of Mechanical Engineers
, v.37, no.4, pp.447-459,
|
|
| 4 |
Reliability and Sensitivity Analysis for Laminated Composite Plate Using Response Surface Method
Lee, Seokje;Jang, Moon-Ho;Kim, Jae-Ki;Moon, Jung-Won;Kim, In-Gul;
/
The Korean Society of Mechanical Engineers
, v.37, no.4, pp.461-466,
|
|
| 5 |
Experimental and Finite Element Study of Tribological Characteristics of SU-8 Thin Film
Yang, Woo Yul;Shin, Myounggeun;Kim, Hyung Man;Han, Sangchul;Sung, In-Ha;
/
The Korean Society of Mechanical Engineers
, v.37, no.4, pp.467-473,
|
|
| 6 |
Controller Parameters Design of Direct Drive Servo Valve Using Genetic Algorithm and Complex Method
Lee, Seong Rae;
/
The Korean Society of Mechanical Engineers
, v.37, no.4, pp.475-481,
|
|
| 7 |
Evaluation of Formability and Mechanical Characteristic for Hot Forming Quenching in Sheet Forming of Al6061 Alloy
Ko, Dae Hoon;Kim, Jae Hong;Lee, Chan Joo;Ko, Dae Cheol;Kim, Byung Min;
/
The Korean Society of Mechanical Engineers
, v.37, no.4, pp.483-490,
|
|
| 8 |
Finite Element Simulation of Fracture Toughness Test
Chu, Seok Jae;Liu, Conghao;
/
The Korean Society of Mechanical Engineers
, v.37, no.4, pp.491-496,
|
|
| 9 |
Interlaminar Fracture Toughness of Hybrid Composites Inserted with Different Kinds of Non-Woven Tissues : Part I-Mode I
Jeong, Jong-Seol;Cheong, Seong-Kyun;
/
The Korean Society of Mechanical Engineers
, v.37, no.4, pp.497-502,
|
|
| 10 |
Evaluation of Compressive Residual Strength in Composite Material Under Impact Damage
Ahn, Sang Soo;Hong, Suk Woo;Koo, Jae Mean;Seok, Chang Sung;
/
The Korean Society of Mechanical Engineers
, v.37, no.4, pp.503-509,
|
|
| 11 |
Comparative Study of Performance of Switching Control and Synchronous Notch Filter Control for Active Magnetic Bearings
Yoo, Seong Yeol;Noh, Myounggyu;
/
The Korean Society of Mechanical Engineers
, v.37, no.4, pp.511-519,
|
|
| 12 |
Element and Crack Geometry Sensitivities of Finite Element Analysis Results of Linear Elastic Stress Intensity Factor for Surface Cracked Straight Pipes
Ryu, Dongil;Bae, Kyung-Dong;Je, Jin-Ho;An, Joong-Hyok;Kim, Yun-Jae;Song, Tae-Kwang;Kim, Yong-Beum;
/
The Korean Society of Mechanical Engineers
, v.37, no.4, pp.521-527,
|
|
| 13 |
Mechanical Behavior of New Thin Sandwich Panel Subjected to Bending
Lee, Jung-In;Kang, Ki-Ju;
/
The Korean Society of Mechanical Engineers
, v.37, no.4, pp.529-535,
|
|
| 14 |
Compliant Mechanism Topology Optimization of Metal O-Ring
Kim, Geun-Hong;Lee, Young-Shin;Yang, Hyung-Lyeol;
/
The Korean Society of Mechanical Engineers
, v.37, no.4, pp.537-545,
|
|
| 15 |
Study of Hot Spinning Process for Head of CNG Storage Vessel
Lee, Hyun Woo;Jung, Sung Yuen;Kim, Chul;
/
The Korean Society of Mechanical Engineers
, v.37, no.4, pp.547-554,
|
|
| 16 |
Moving Support Elements for Dynamic Finite Element Analysis of Statically Determinate Beams Subjected to Support Motions
Kim, Yong-Woo;Jhung, Myung Jo;
/
The Korean Society of Mechanical Engineers
, v.37, no.4, pp.555-567,
|
|
| 17 |
Drug Bottle Delivery Robot Capable of Smartphone-Based Control and Image Process and Combining Wheel and Quadruped
Lee, Sang Young;Kim, Hyun Su;Kim, Young Long;Hong, Seok Ho;Kim, Dong Hwan;
/
The Korean Society of Mechanical Engineers
, v.37, no.4, pp.569-579,
|
|
| 18 |
Effect of Damper Between Maglev Vehicles on Curve Negotiation
Kim, Ki-Jung;Han, Hyung-Suk;Kim, Chang-Hyun;Yang, Seok-Jo;
/
The Korean Society of Mechanical Engineers
, v.37, no.4, pp.581-587,
|
|