|
1 |
A Development of Wind Tunnel Test System for Synthetic Jet Actuator with Embedded Web Server
Jung Gyu Hong;
/
The Korean Society of Mechanical Engineers
, v.29, no.5, pp.639-646,
|
|
2 |
Injection Molded Microcellular Plastic Gear (I) - Process Design for the Microcellular Plastic Gear -
Ha Young Wook;Chong Tae Hyong;
/
The Korean Society of Mechanical Engineers
, v.29, no.5, pp.647-654,
|
|
3 |
Injection Molded Microcellular Plastic Gear (II) - Characteristics of the Counter Pressurized Microcellular Plastic Gear -
Ha Young Wook;Takahashi Hideo;Chong Tae Hyong;
/
The Korean Society of Mechanical Engineers
, v.29, no.5, pp.655-662,
|
|
4 |
A Cause Analysis of Fatigue Failure of Fuel Pump Block Material(CK35) for Marine Engine
Choi Sung Jong;Kang Chang Won;Kim Tae Gyu;
/
The Korean Society of Mechanical Engineers
, v.29, no.5, pp.663-670,
|
|
5 |
Boundary Layer Mesh Generation for Three-Dimensional Geometries with Thin Thickness
Kwon Ki Youn;Chae Soo-Won;Lee Byung Chai;
/
The Korean Society of Mechanical Engineers
, v.29, no.5, pp.671-679,
|
|
6 |
Stiffness Analysis of a Low-DOE Parallel Manipulator using the Theory of Reciprocal Screws
Kim Han Sung;
/
The Korean Society of Mechanical Engineers
, v.29, no.5, pp.680-688,
|
|
7 |
Reliability Estimation of Door Hinge for Rome Appliances
Kim Jin Woo;Shin Jae Chul;Kim Myung Soo;Moon Ji Seob;
/
The Korean Society of Mechanical Engineers
, v.29, no.5, pp.689-697,
|
|
8 |
NURBS Curve Interpolator for Controlling the Surface Roughness
Choi In hugh;Jung Tae sung;Yang Min Yang;Lee Dong yoon;
/
The Korean Society of Mechanical Engineers
, v.29, no.5, pp.698-706,
|
|
9 |
Optimization of Passive Mixer for Enhanced Mixing in a Micro-channel by Using Lattice Bloltzmann Method
Han Gyu suk;Byun Sung Joon;Yoon Joon Yong;
/
The Korean Society of Mechanical Engineers
, v.29, no.5, pp.707-715,
|
|
10 |
Hybrid Component Mode Synthesis Considering Residual Dynamic Flexibility Attachment Mode
Cha Hyun Joo;Kim Jin Ho;Lee Shi Bok;
/
The Korean Society of Mechanical Engineers
, v.29, no.5, pp.716-725,
|
|
11 |
Machining Accuracy for Large Optical Mirror using On-Machine Spherical Surface ]Referenced Shack-Hartmann System
Hong Jong Hui;Oh Chang Jin;Lee Eung Suk;Kim Ock Hyn;
/
The Korean Society of Mechanical Engineers
, v.29, no.5, pp.726-733,
|
|
12 |
Integrity Evaluation Model for a Straight Pipe with Local Wall Thinning Defect
Park Chi Yong;Kim Jin Weon;
/
The Korean Society of Mechanical Engineers
, v.29, no.5, pp.734-742,
|
|
13 |
Modeling on an Antenna Flexible Characteristics of a Prototype Gimbal with an Antenna and Major Design Factors to determine a System Bandwidth
Baek Joo Hyun;
/
The Korean Society of Mechanical Engineers
, v.29, no.5, pp.743-753,
|
|
14 |
Development of Optimum Global Failure Prediction Model for Steam Generator Tube with Two Parallel Cracks
Moon Seong ln;Chang Yoon Suk;Lee Jin Ho;Song Myung Ho;Choi Young Hwan;Kim Joung Soo;Kim Young Jin;
/
The Korean Society of Mechanical Engineers
, v.29, no.5, pp.754-761,
|
|
15 |
Analysis of a Bydrodynamic Bearing of a BDD Spindle Motor Due to Elevated Temperature
Kim Kwan Soo;Kim Hak Woon;Lee Haeng Soo;Kim Chul Soon;Jang Gun Hee;
/
The Korean Society of Mechanical Engineers
, v.29, no.5, pp.762-769,
|
|
16 |
A Measuring Method for Positioning Characteristics Analysis of NC Machine Controller using Dynamometer
Kim Hyung Gon;An Dong Youl;Lee Eung Suk;
/
The Korean Society of Mechanical Engineers
, v.29, no.5, pp.770-776,
|
|
17 |
Swing-Motion Control System Design for the Crane Based on Simultaneous Optimum Design Approach
Jang Ji Seong;Kim Young Bok;
/
The Korean Society of Mechanical Engineers
, v.29, no.5, pp.777-785,
|
|