|
1 |
Friction Transition Diagram Considering the Effects of Oxide Layer Formed on Contact Parts of TiN Coated Ball and Steel Disk in Sliding
Cho, Chung-Woo;Park, Dong-Shin;Lee, Young-Ze;
/
The Korean Society of Mechanical Engineers
, v.27, no.3, pp.335-342,
|
|
2 |
An Optimization of Air-Lubricated Slider Bearings Using the Reduced Basis Concept
Yoon, Sang-Joon;Kim, Dong-In;Kang, Tae-Sik;Jeong, Tae-Gun;Choi, Dong-Hoon;
/
The Korean Society of Mechanical Engineers
, v.27, no.3, pp.343-348,
|
|
3 |
Eviction Characteristics of Piston Assembly (I) -Theory-
Cho, Myung-Rae;Ha, Kyoung-Pyo;Kim, Joong-Soo;Oh, Dae-Yoon;Han, Dong-Chul;
/
The Korean Society of Mechanical Engineers
, v.27, no.3, pp.349-356,
|
|
4 |
Ultrasonic Vibration Machining of Inconel
Park, Myung-Ho;
/
The Korean Society of Mechanical Engineers
, v.27, no.3, pp.357-362,
|
|
5 |
Cavitation-Erosion Characteristics between Polymer Based Composites and Metals under the Various Condition of Fluid Systems
Kim, Yun-Hae;Son, Young-Jun;Eum, Soo-Hyun;Lee, Jung-Ju;
/
The Korean Society of Mechanical Engineers
, v.27, no.3, pp.363-371,
|
|
6 |
Effect of Fiber Orientation Angle and Property of Metal Laminate on Impact Behaviors of Fiber Metal Laminates
Nam, Hyun-Wook;Jung, Sung-Wook;Han, Kyung-Seop;
/
The Korean Society of Mechanical Engineers
, v.27, no.3, pp.372-380,
|
|
7 |
Shape Optimization of a CRT based on Response Surface and Kriging Metamodels
Lee, Tae-Hee;Lee, Chang-Jin;Lee, Kwang-Ki;
/
The Korean Society of Mechanical Engineers
, v.27, no.3, pp.381-386,
|
|
8 |
The Effect of the Area Ratio and the Distance Ratio on Bending Stiffness of Two Rectangular Spot-Welded Plates
Han, Geun-Jo;Ahn, Sung-Chan;Shim, Jae-Joon;Han, Dong-Seop;
/
The Korean Society of Mechanical Engineers
, v.27, no.3, pp.387-392,
|
|
9 |
Heat Transfer Analysis and BOG Estimation of Membrane-Type LNG Cargo during Laden Voyage
Heo, Jin-Uk;Lee, Young-Ju;Cho, Jin-Rae;Ha, Mun-Keun;Lee, Joong-Nam;
/
The Korean Society of Mechanical Engineers
, v.27, no.3, pp.393-400,
|
|
10 |
A Development of CAD Program for Metal Bellows Diaphragm
Cho, Hae-Yong;Nam, Gi-Jung;Oh, Byung-Ki;Kim, Young-Hun;Lee, Jae-Hun;Suh, Jung;
/
The Korean Society of Mechanical Engineers
, v.27, no.3, pp.401-408,
|
|
11 |
Development of 2-Dim Lagrangian Hydrocode and Application to Large Deformation Problems
Lee, Min-Hyung;Kim, Sung-Woo;
/
The Korean Society of Mechanical Engineers
, v.27, no.3, pp.409-415,
|
|
12 |
A Study on Implementation of Risk Based Inspection Procedures to a Petrochemical Plant
Song, Jung-Soo;Shim, Sang-Hoon;Kim, Ji-Yoon;Yoon, Kee-Bong;
/
The Korean Society of Mechanical Engineers
, v.27, no.3, pp.416-423,
|
|
13 |
Vibration Characteristics of a Dummy Fuel Rod Supported by Spacer Grids
Choi, Myoung-Hwan;Kang, Heung-Seok;Yoon, Kyung-Ho;Kim, Hyung-Kyu;Song, Kee-Nam;
/
The Korean Society of Mechanical Engineers
, v.27, no.3, pp.424-431,
|
|
14 |
Friction and Wear of Inconel 690 for Steam Generator Tube in Fretting
Lee, Young-Ze;Lim, Min-Kyu;Oh, Se-Doo;
/
The Korean Society of Mechanical Engineers
, v.27, no.3, pp.432-439,
|
|
15 |
Residual Strength of Fiber Metal Laminates After Impact
Nam, Hyun-Wook;Lee, Young-Tae;Jung, Chang-Kyu;Han, Kyung-Seop;
/
The Korean Society of Mechanical Engineers
, v.27, no.3, pp.440-449,
|
|
16 |
Design of UV-Molding Process to Maximize the Replication Properties in Microstructures
Kim, Dong-Mook;Kim, Seok-Min;Sohn, So-Young;Kang, Shin-Ill;
/
The Korean Society of Mechanical Engineers
, v.27, no.3, pp.450-454,
|
|
17 |
Hydrogen Embrittlement of Zr-2.5Nb Pressure Tube at Room Temperature by Precipitated Hydride
Oh, Dong-Joon;Boo, Myung-Hwan;Kim, Young-Suk;
/
The Korean Society of Mechanical Engineers
, v.27, no.3, pp.455-463,
|
|
18 |
Design of Rolling Pass Schedule utilizing Grain Refinement by Strain Accumulation
Park, Jong-Jin;Lee, Sang-Joo;
/
The Korean Society of Mechanical Engineers
, v.27, no.3, pp.464-471,
|
|
19 |
Dynamic Analysis of the Piezo-Actuator for a New Generation Lithography System
Park, Jae-Hak;Jung, Jong-Chul;Huh, Kun-Soo;Chung, Chung-Choo;
/
The Korean Society of Mechanical Engineers
, v.27, no.3, pp.472-477,
|
|