|
| 1 |
3-D Finite Element Mesh Generation of Tires Considering Detailed Tread Pattern
Cho, Jin-Rae;Kim, Ki-Whan;Hong, Sang-Il;Kim, Nam-Jeon;Kim, Kee-Woon;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1615-1622,
|
|
| 2 |
Theoretical Temperature Analysis for 88316 Piping Weld
Kim, Jong-Sung;Lee, Seung-Gun;Jin, Tae-Eun;Kwon, Soon-Man;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1623-1629,
|
|
| 3 |
Deformation and Fracture Behavior of Structural Bulk Amorphous Metal under Quasi-Static Compressive Loading
Shin, Hyung-Seop;Ko, Dong-Kyun;Oh, Sang-Yeob;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1630-1635,
|
|
| 4 |
Estimation of Bolted Joint Strength of Flat Plate of Glass-Mat Reinforced Thermoplastics
Kang, Wan-Seok;Min, Ji-Hyun;Lee, Jae-Wook;Im, Yong-Taek;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1636-1643,
|
|
| 5 |
Development of Design System for EPS Cushioning Package of Monitor Using Axiomatic Design
Yi, Jeong-Wook;Ha, Dae-Yul;Lee, Sang-Woo;Lim, Jae-Moon;Park, Gyung-Jin;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1644-1652,
|
|
| 6 |
Spectral Element Analysis for the Dynamic Characteristics of an Axially Moving Timoshenko Beam
Kim, Joo-Hong;Oh, Hyung-Mi;Lee, U-Sik;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1653-1660,
|
|
| 7 |
A Study on Efficient Generation of Beam-Mass Model for Simplification of the Crankshaft in the Large Marine Engine
Suh, Myung-Won;Shim, Mun-Bo;Kim, Ki-Hyun;Kim, Kyu-Hee;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1661-1666,
|
|
| 8 |
Calculation of Sidewall Lateral Stiffness of a Radial Tire Using Material Properties of Rubber Compounds
Kim, Yong-Woo;Kim, Jong-Guk;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1667-1675,
|
|
| 9 |
The Influence of Temperature on Low Cycle Fatigue Behavior of Prior Cold Worked 316L Stainless Steel (II) - Life Prediction and Failure Mechanism -
Hong, Seong-Gu;Yoon, Sam-Son;Lee, Soon-Bok;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1676-1685,
|
|
| 10 |
Bending Behaviors of Stainless Steel Tube Filled with Al5Si4Cu4Mg Closed Cell Aluminum Alloy Foam
Kim, Am-Kee;Lee, Hyo-Jin;Cho, Seong-Seock;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1686-1694,
|
|
| 11 |
Fatigue Crack Initiation around a Hole under Out-of-phase Biaxial Loading
Huh, Yong-Hak;Park, Pi-Lip;Kim, Dong-Jin;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1695-1702,
|
|
| 12 |
Finite Element Analysis for Fatigue Crack Closure Behavior Using Reversed Plastic Zone Size
Choi, Hyeon-Chang;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1703-1711,
|
|
| 13 |
Acceleration Feedforward Control in Active Magnetic Bearing System Subject to Base Motion by Filtered-x LMS Algorithm
Kang, Min-Sig;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1712-1719,
|
|
| 14 |
Measurement of the Dynamic Transmission Error of Helical Gears by the Accelerometers
Kim, Dae-Sik;Cho, Do-Hyun;Park, Chan-Il;Choi, Deo-Kki;Park, Chan-Gook;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1720-1727,
|
|
| 15 |
Design of a Vertical Lathe for the Improved Stability at High Speed Machining
Ro, Seung-Hoon;Shon, Jae-Yul;Ro, Kyung-Ho;Kim, Sung-Chul;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1728-1737,
|
|
| 16 |
SPH Parameters for Analysis of Penetration Phenomenon at Hypervelocity Impact of Meteorite
Lee, Sung-Soo;Seo, Song-Won;Min, Oak-Key;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1738-1747,
|
|
| 17 |
A Study on the Forming of Fine Gear Housing using Rapid Prototyping
Lee, Seung-Soo;Kim, Min-Ju;Park, Jeung-Bo;Jeon, Eon-Chan;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1748-1753,
|
|
| 18 |
Three Dimensional Molecular Dynamics Simulation of Nano-Lithography Process for Fabrication of Nanocomponents in Micro Electro Mechanical Systems (MEMS) Applications
Kim, Young-Suk;Lee, Seung-Sub;Na, Kyoung-Hoan;Son, Hyun-Sung;Kim, Jin;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1754-1761,
|
|
| 19 |
Automatic Quadrilateral Mesh Generation Using Updated Paving Technique in Various Two Dimensional Objects
Yang, Hyun-Ik;Kim, Myung-Han;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1762-1771,
|
|
| 20 |
Design, Fabrication, and Performance Evaluation of a Sensorized Superelastic Alloy Microrobot Gripper
Kim, Deok-Ho;Kim, Byung-Kyu;Kang, Hyun-Jae;Kim, Sang-Min;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1772-1777,
|
|
| 21 |
Vibration Control of Plates Using Resonant Shunted Piezoelectric Material
Kim, Young-Ho;Park, Chul-Hue;Park, Hyun-Chul;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1778-1784,
|
|
| 22 |
A Comparative Study of Methods to Predict Fatigue Crack Growth under Random Loading
Lee, Hak-Joo;Kang, Jae-Youn;Choi, Byung-Ik;Kim, Chung-Youb;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1785-1792,
|
|
| 23 |
Optimal Design of a Multi-Layered Plate Structure Under High-Velocity Impact
Yoon, Deok-Hyun;Park, Myung-Soo;Yoo, Jeong-Hoon;Chung, Dong-Teak;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1793-1799,
|
|
| 24 |
Electrical Conductivity of Dielectric on WEDM Characteristics
Kim, Chang-Ho;Yeo, Hong-Tae;
/
The Korean Society of Mechanical Engineers
, v.27, no.10, pp.1800-1808,
|
|