Purpose : This study aimed to find out the effects of treatments on the surface of Zirconia. Methods : To this end, we selected six treatments that have been used widely: steam cleaning, 2bar & 6bar sand blasting, grinding by green stone point, grinding by diamond bur, and grinding by diamond bur with water spray. Results : The results of our study showed that monoclinic rate increased from all six treatments. Monoclinic rate varied by treatments, ranged from 0.6% (steam cleaning) to 6.5% (6bar sand blasting). These values from all six treatments were below ISO 13356 standard, which is 25%. Also, we found that two treatments (green stone point and diamond bur) increased roughness of surface of Zirconia. Conclusion : This study concluded that phase changes of Zirconia were not significant by using six treatments we employed.

Purpose : To understand the impact on the strength or restoration force by the change of heating temperature when soldering 18-8 stainless steel round wire which is the chrome-nickel class for dental orthodontic device production. Methods : The following conclusions were made upon the results from tensile strength test, 3 point bending test, and $90^{\circ}$ bending fatigue test with 24 samples that had been applied with condition 1 (before heat treatment - natural) and condition 2 (after heat treatment - mooring 30 seconds after heating up to $500^{\circ}C$, $700^{\circ}C$, and $900^{\circ}C$) to ${\phi}0.4mm$, ${\phi}0.7{\beta}mm$, 18-8 stainless steel round wire (spring hard) by Jinsung Company. Results : When it was heat-treated at $900^{\circ}C$, both ${\phi}0.4mm$ and ${\phi}0.7mm$ showed very low tensile strengths compared to the heat treated cases at $500^{\circ}C$ and $700^{\circ}C$ Yield strengths of both ${\phi}0.4mm$ and ${\phi}0.7mm$ showed very low compared to the heat treated cases at natural, $500^{\circ}C$, and $700^{\circ}C$, as well. Upon the results of 3 point bending test, the heat treated case at $900^{\circ}C$ showed very low in both ${\phi}0.4mm$ and ${\phi}0.7mm$, compared to the heat treated cases at natural, $500^{\circ}C$, and $700^{\circ}C$. Tensile strength of both ${\phi}0.4mm$ and ${\phi}0.7mm$ as well, showed very low compared to the heat treated cases at natural, $500^{\circ}C$, and $700^{\circ}C$. Upon the results of $90^{\circ}$ bending fatigue test, the heat treated case at $900^{\circ}C$ showed the highest wave node resistance in both ${\phi}0.4mm$ and ${\phi}0.7mm$. Conclusion : This study concluded that heating temperature change during wire soldering impacts on the characteristics of orthodntic wire.

Purpose : The purpose of study was to survey self-efficacy and job satisfaction for 500 dental technicians. Methods : The subjects were composed of 500 dental technicians in Daegu Metropolitan city and Gyeong-buk. This study was done using the Statistical Package for Social Sciences 17.0 for Windows. As for the analysis methods, the study used the frequency analysis, percentage, mean, t-test, analysis of variance, multiple regression analysis. Results : Self-efficacy of dental technician shows self confidence(M= 3.56), self regulatory efficacy(M=3.48), task difficulty preference(M=3.46). Job satisfaction of dental technician shows affairs satisfaction(M=3.58), colleague satisfaction(M=3.57), promotion satisfaction(M=3.48), salary satisfaction(M=3.56). Self-efficacy which affect on job satisfation was self confidence and self regulatory efficacy. Conclusion : A sense of self-efficacy and degree of job satisfaction are high when the sense of the degree of job satisfaction could be high only through a high sense of self-efficacy. In order to promote dental technician and dental hygienist of self-efficacy and job satisfaction, education and career and monthly salary is required high.

Purpose : The purpose of study was 500 people who are not related to dentistry in order to survey image about dental technicians. Methods : The subjects were composed of 500 people who are not related in Daegu Metropolitan city. This study was done using the Statistical Package for Social Sciences 17.0 for Windows. As for the analysis methods, the study used the frequency analysis, percentage, mean, t-test, analysis of variance. Results : The score on the image of dental technicians declined in the order of occupational image(2.98), work image(3.14), personal image(3.26), social image(2.87). 'It is hard and stressful' in the occupational image had the highest score with 3.69, 'Dentist and companionship are strong' in the occupational image had the lowest score with 2.21. 'It need expert knowledge and a skilled technology' in the work image had the highest score with 3.69, 'Health medical treatment side of health technique is occupation.' in the work image had the lowest score with 3.69. 'It always work busily' in the personal image had the highest score with 3.69, 'It is value and is effect work.' in the personal image had the lowest score with 3.69. 'An employment is easy after license acquisition.' in the social image had the highest score with 3.69, 'It admit independence' in the social image had the lowest score with 3.69. Conclusion : Dental technition research in order to image improvement and recognition, as the medical professional must construct the desirable dental technition image and recognition.