Textile Science and Engineering (한국섬유공학회지)

The Korean Fiber Society (한국섬유공학회)
권호 표지
DOI QR코드

DOI QR Code

Improvement of Human Manikin Support Structure Calculation Speed Using Mesh Resolution Modification

메쉬 해상도 조절을 이용한 인체 마네킨 지지구조량 계산 속도 개선

  • Jae Ryoung Kim (Department of Materials Design Engineering, Kumoh National Institute of Technology) ;
  • In Hwan Sul (Department of Materials Design Engineering, Kumoh National Institute of Technology)
  • 김재룡 (금오공과대학교 소재디자인공학과) ;
  • 설인환 (금오공과대학교 소재디자인공학과)
  • Received : 2024.07.05
  • Accepted : 2024.08.12
  • Published : 2024.08.31
⟨ Previous Next ⟩

Abstract

3D printing needs a support structure for an overhang structure, which increases printing time and filament usage. Our team has developed a calculation technique, "modified support structure tomography," to predict the optimal orientation, which can minimize support structures in previous works. However, the more triangular elements the mesh had, the more calculation time was needed. This paper adopted two mesh resolution modification methods to reduce the prediction time: mesh reduction and alpha shape approximation. Both methods were implemented with user-friendly Python 3 language for various shapes, including human manikin. Calculation times and optimal orientation search results were compared.

Keywords

Acknowledgement

이 논문은 정부(과학기술정보통신부)의 재원으로 한국연구재단의 지원을 받아 수행된 연구(NRF-2022R1A2C1010072)입니다.

References

  1. ISO/ASTM 52900, "Additive Manufacturing-General Principles-Terminology", ASTM F2792-10e1, 2015.
  2. O. Abdulhameed, A. Al-Ahmari, W. Ameen, and S. H. Mian, "Additive Manufacturing: Challenges, Trends, and Applications", Adv. Mech. Eng., 2019, 11, 1687814018822880.
  3. J. L. Rueda-Arreguin, M. Ceccarelli, and C. R. Torres-SanMiguel, "Impact Device for Biomechanics of Human Head-Neck Injuries", Mathematical Problems in Engineering, 2021, 2021, 5592673.
  4. I. Badash, K. Burtt, C. A. Solorzano, and J. N. Carey, "Innovations in Surgery Simulation: A Review of Past, Current and Future Techniques", Ann. Trans. Med., 2016, 4, 453.
  5. EMPA, "12th International Manikin and Modelling Meeting (12i3m)", St. Gallen, Switzerland: zenodo.org, 2018.
  6. J. Y. Jung and I. H. Sul, "Quantitative Analysis on Optimal 3D Printing Orientation Information of Human Manikin Pieces", Text. Sci. Eng., 2022, 59, 17-23.
  7. J. Y. Jung, S. Chee, and I. H. Sul, "Support Structure Tomography Using Per-pixel Signed Shadow Casting in Human Manikin 3D Printing", Fashion and Textiles, 2022, 9, 1-18.
  8. J. Y. Jung, S. Chee, and I. Sul, "Prediction of Optimal 3D Printing Orientation Using Vertically Sparse Voxelization and Modified Support Structure Tomography", Int. J. Clothing Sci. Technol., 2023, 35, 799-832.
  9. C. Dai, C. C. Wang, C. Wu, S. Lefebvre, G. Fang, and Y.-J. Liu, "Support-free Volume Printing by Multi-axis Motion", ACM Transactions on Graphics, 2018, 37, 1-14.
  10. B. Ezair, F. Massarwi, and G. Elber, "Orientation Analysis of 3D Objects Toward Minimal Support Volume in 3D-printing", Computers & Graphics, 2015, 51, 117-124.
  11. P. Cignoni, C. Montani, and R. Scopigno, "A Comparison of Mesh Simplification Algorithms", Computers & Graphics, 1998, 22, 37-54.
  12. H. Edelsbrunner, "Alpha Shapes-a Survey", Tessellations in the Sciences: Virtues, Techniques and Applications of Geometric tilings, Springer, Berlin, 2011.