과제정보
본 연구는 산업통상자원부 글로벌주력산업품질대응 뿌리기술개발사업(20016443) 및 가상공학플랫폼 구축사업(P0022335)의 연구비 지원으로 수행되었습니다.
참고문헌
- A. Al Rashid, H. Ikram, and M. Koc, "Additive Manufacturing and Mechanical Performance of Carbon Fiber Reinforced Polyamide-6 Composites", Materials Today: Proceedings, Vol. 62, 2022, pp. 6359-6363.
- X. Zhang, W. Fan, and T. Liu, "Fused Deposition Modeling 3D Printing of Polyamide-based Composites and Its Applications", Composites Communications, Vol. 21, 2021, 100413.
- M. M. Attia, O. Ahmed, O. Kobesy, and A. S. Malek, "Behavior of FRP Rods under Uniaxial Tensile Strength with Multiple Materials as an Alternative to Steel Rebar", Case Studies in Construction Materials, Vol. 17, 2022, e01241.
- S. K. Ha, S. Na, and H. K. Lee, "Bond Characteristics of Sprayed FRP Composites Bonded to Concrete Substrate Considering Various Concrete Surface Conditions", Composite Structures, Vol. 100, 2013, pp. 270-279.
- M. Bondy, W. Rodgers, and W. Altenhof, "Tensile Fatigue Characterization of Polyamide 66/carbon Fiber Direct/in-line Compounded Long Fiber Thermoplastic Composites", Composites Part B: Engineering, Vol. 173, 2019, 106984.
- X. Bin, W. M.-Y. Wu, X.-Y. Lei, J.-G., Zhou, Z.-W. Fu, L.-Y. Zhu, and L. Kuan, "An Injecting Molding Method for Forming the HFRP/PA6 Composite Parts", Polymers, Vol. 14, No. 23, 2022, pp. 5085-5092.
- B. Matthew and A. William, "Experimental Characterisation of the Mechanical Properties of a Carbon Fibre/PA66 LFT Automotive Seatback under Quasi-static and Impact Loading", International Journal of Crashworthiness, Vol. 25, No. 4, 2020, pp.401-420.
- S. Wei, X. Ding, Y. Qiu, V. D. Waele, and H. Guo, "Enhanced Performance Polyamide Membrane by Introducing Highporosity SOD/GO Composite Interlayer to Tailor the Interfacial Polymerization Process", Chemical Engineering Journal, Vol. 481, No. 1, 2024, 148595.
- J.-B. Li, C.-Y. Zhu, B.-B. Guo, C. Liu, J.-H. Xin, C. Zhang, J. Wu, L. Zhang, H.-C. Yang, and Z.-K. Xuo, "Ultrahigh-permeance Polyamide Thin-film Composite Membranes Enabled by Interfacial Polymerization on a Macro-porous Substrate Toward Organic Solvent Nanofiltration", Journal of Membrane Science, Vol. 693, 2024, 122342.
- R. Song, M. Morak, and A. Muliana, "A Thermo-viscoelastic Model of Anisotropic Polyamide Short Glass Fiber Composites", Composite Structures, Vol. 296, 2022, 115850.
- Y. Rong, P. Zhao, T. Shen, J. Gao, S. Zhou, J. Huang, G. Zhao, and Y. Liu, "Mechanical and Tribological Properties of Basalt Fiber Fabric Reinforced Polyamide 6 Composite Laminates with Interfacial Enhancement by Electrostatic Self-assembly of Graphene Oxide", Journal of Materials Research and Technology, Vol. 27, 2023, pp. 7795-7806.
- A. Salazar, A.J. Cano, and J. Rodriguez, "Mechanical and Fatigue Behaviour of Polyamide 12 Processed via Injection Moulding and Selective Laser Sintering. Analysis Based on Kitagawa-Takahashi Diagrams", Engineering Fracture Mechanics, Vol. 275, 2022, 108825.
- Y. Yan, Y.-H. Huang, Y. Wang, Z.-C. Xiao, and M.-B. Yang, "Polyamide 6 (PA6)/polyethylene Terephthalate (PET) Blends with Gradient and Encapsulation Structure Developed by Injection Molding", Polymer, Vol. 180, 2019, 121679.
- M. Herrero, K. Nunez, R. Gallego, J.C. Merino, and J.M. Pastor, "Sepiolite as Replacement of Short Glass Fibre in Polyamide Composites for Injection Moulding Applications", Applied Clay Science, Vol. 162, 2018, pp. 129-137.
- H.-X. Huang, B. Wang, and W.-W. Zhou, "Polymorphism in Polyamide 6 and Polyamide 6/clay Nanocomposites Molded via Water-assisted Injection Molding", Composites Part B: Engineering, Vol. 43, 2012, pp. 972-977.
- D. Teixeira, M. Giovanela, L.B. Gonella, and J.S. Crespo, "Influence of Injection Molding on the Flexural Strength and Surface Quality of Long Glass Fiber-reinforced Polyamide 6.6 Composites", Materials & Design, Vol. 85, 2015, pp. 695-706.
- L. Quagliato, J. Lee, J.H. Fonseca, D. Han, H. Lee, and N. Kim, "Influences of Stress Triaxiality and Local Fiber Orientation on the Failure Strain for Injection-molded Carbon Fiber Reinforced Polyamide-6", Engineering Fracture Mechanics, Vol. 250, 2021, 107784.
- L. Quagliato, Y. Kim, J. H. Fonseca, D. Han, S. Yun, H. Lee, N. Park, H. Lee, and N. Kim, "The Influence of Fiber Orientation and Geometry-induced Strain Concentration on the Fatigue Life of Short Carbon Fibers Reinforced Polyamide-6", Materials & Design, Vol. 190, 2020, 108569.
- A. Bernasconi and F. Cosmi, "Analysis of the Dependence of the Tensile Behaviour of a Short Fibre Reinforced Polyamide Upon Fibre Volume Fraction, Length and Orientation", Procedia Engineering, Vol. 10, 2011, pp. 2129-2134.
- A. Hendlmeier, F. Stojcevski, R. Alexander, S. Gupta, and L. C. Henderson, "Examining Conductivity, Current Density, and Sizings Applied to Carbon Fibers during Manufacture and Their Effect on Fiber-to-matrix Adhesion in Epoxy Polymers", Composites Part B: Engineering, Vol. 179, 2019, 107494.
- G. Viscusi, E. Lamberti, M. R. Acocella, and G. Gorrasi, "Production of Electrospun Hybrid Membranes Based on Polyamide 6 Reinforced with Hemp Fibers Dissolved in 1-ethyl-3-methylimidazolium Dicyanamide Ionic Liquid", Journal of Molecular Liquids, Vol. 387, 2023, 122656.
- N. Ni, Y. Wen, D. He, X. Yi, Z. Zhao, and Y. Xu, "Synchronous Improvement of Loss Factors and Storage Modulus of Structural Damping Composite with Functionalized Polyamide Nonwoven Fabrics", Materials & Design, Vol. 94, 2016, pp. 377-383.
- X. Chen, S. Mei, W. Zhao, Y. Zhang, X. Zhang, Z. Cui, P. Fu, X. Pang, M. Liu, and Y. Ye, "Thermoplastic Polyamide Elastomer Based Flexible Humidity Sensor for Breath Monitoring", Materials & Design, Vol. 235, 2023, 112438.
- ASTM C117, Standard Test Method for Materials Finer than 75㎛ (No.200) Sieve in Mineral Aggregates by Washing, ASTM: West Conshohocken, PA, USA, 2022.
- X. Wang, G. Wu, and P. Xie, "Microstructure and Properties of Glass Fiber-reinforced Polyamide/nylon Microcellular Foamed Composites," Polymers, Vol. 12, 2020, pp. 1-11.
- P. Lee, J. Ha, and B. Kim, "Melt Flow Improvement of Polyamide 6/Glass Fiber Composite Using Amide-type Lubricant," Polymer, Vol. 42, 2018, pp. 568-572.