과제정보
본 연구는 한국연구재단을 통해 과학기술정보통신부 연구개발사업(2021M2E4A1037979, RS-2022-00143316)의 지원을 받아 수행되었음.
참고문헌
- Vepsalainen, M. and Saario, T., 2010, "Magnetite Dissolution and Deposition in NPP Secondary Circuit," VTT Technical Research Centre of Finland, Espoo, Finland, VTT-R-09735-10.
- Shin, K. S., Moon, Y. S., and Min, K. M., 2011, "Development of ETSS for SG Secondary Side Loose Part Signal Detection and Characterization," Trans. of the KPVP, Vol. 7, No. 3, pp. 61-66.
- Kain, V., Roychowdhury, S., Ahmedabadi, P., and Barua, D.K., 2011, "Flow Accelerated Corrosion: Experience from Examination of Components from Nuclear Power Plants," Eng. Fail. Anal., Vol. 18, pp. 2028-2041. doi:https://doi.org/10.1016/j.engfailanal.2011.06.007
- Cho, M. K. and Cho, K. H., 2021, "A Stress Analysis of Wall-Thinned Feedwater Ring in Nuclear Power Plant," Trans. of the KPVP, Vol. 17, No. 1, pp. 56-63.
- Trevin, S., 2012, Flow Accelerated Corrosion (FAC) in Nuclear Power Plant Components, in: D. Feron (Ed.), Nuclear Corrosion Science and Engineering, Woodhead Publishing Limited, Sawston. doi:https://doi.org/10/1533/9780857095343.2.186 10/1533/9780857095343.2.186
- Tapping, R. L., Turner, C. W., and Thomson, R. H., 1991, "Steam Generator Deposits-A Detailed Analysis and Some Inferences," Corrosion, Vol. 47, pp. 489-495. doi:https://doi.org/10.5006/1.3585283
- Suk, D. H., Oh, C. H., and Lee, J. W., 2010, "A Study on ODSCC of OPR 1000 Steam Generator Tube," Trans. of the KPVP, Vol. 6, No. 2, pp. 16-19.
- Cho, N, C., Shin, D. M., and Kim, Y. S., 2017, "A Study on the Relationship between Steam Generator Fouling and the Electric Powr," Trans. of the KPVP, Vol. 13, No. 2, pp. 31-37.
- Yang, G., Pointeau, E., Tevissen, E., and Chagnes, A., 2017, "A Review on Clogging of Recirculating Steam Generators in Pressurized-Water Reactors," Prog. Nucl. Energ., Vol. 97, pp. 182-196. doi:https://doi.org/10.1016/j.pnucene.2017.01.010
- Cho, N. C., Kang, Y. S. Kang, Kim, H. N., and Lee, K.-H., 2017, "Degradation Characteristics of Tubes in the Steam Generator Tubesheet," Trans. of the KPVP, Vol. 10, No. 1, pp. 7-14. doi:https://doi.org/10.20466/KPVP.2014.10.1.007
- Paine, J. P. N., Hobart, S. A., and Sawochka, S. G., 1991, "Predicting Steam Generator Crevice Chemistry," In Proceedings of the 5th International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, Monterey, CA, USA, Aug. 25-29, pp. 739-744.
- Millet, P. J. and Fenton, J. M., 1991, "A Detailed Model of Localized Concentration Processes in Porous Deposits of SGs," In Proceedings of the 5th International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, Monterey, CA, USA, Aug. 25-29, pp. 745-751.
- Plonski, I. J., 1997, "Effect of Bare Metal Surface on the Dissolution in Aqueous Citrate Solutions of Magnetite Films on Carbon Steel," J. Appl. Electrochem. Vol. 27, pp. 1184-1192. doi:https://doi.org/10.1023/A:1018471617720
- Wolfe, R. and Feldman, H., 2014, "Steam Generator Management Program: PWR Steam Generator Top-of-Tubesheet Denting History and Causes," Electric Power Research Institute, Palo Alto, CA, TR-3002002197.
- Kim, H. -D., Park, S. -K., Yim, C. J., and Chung H. S., 2010, "Root Cause Analysis of Axial ODSCC of Steam Generators Tubes of OPR1000," Trans. of the KPVP, Vol. 6, No. 1, pp. 83-88.
- Staehle, R. W. and Gorman, J. A., 2003, "Quantitative Assessment of Submodes of Stress Corrosion Cracking on the Secondary Side of Steam Generator Tubing in Pressurized Water Reactors: Part 1," Corrosion, Vol. 59, pp. 931-994. doi:https://doi.org/10.5006/1.3277522
- Cullity, B. D., 1978, Elements of X-ray Diffraction, Addision-Wesley: Reading, MA, USA.
- Gao, H., Huang, Y., Nix, W. D., and Hutchinson, J. W., 1999, "Mechanism-based Strain Gradient Plasticity-I. Theory," J. Mech. Phys. Solids, Vol. 47, pp. 1239-1263. doi:https://doi.org/10.1016/S0022-5096(98)00103-3
- Oh, S., Kim, D., Kim, K., Kim, D. -I., Chung, W., and Shin, B. -H., 2023, "The Effect of Surface Roughness on Repassivation and Pitting Corrosion of Super Duplex Stainless Steel UNS S 32760, Int. J. Electrochem. Sc., Vol. 18, 100351. doi:https://doi.org/10.1016/j.ijoes.2023.100351
- Ashcroft, N. W., 1976, Solid State Physics, Saunders College Publishing, New York, USA.
- Nowak, W. J., Wierzba, B., and Sieniawski, J., "Surface Preparation Effect on Oxidation Kinetics of Ni-base Superalloy," J. Phys. Conf. Ser., Vol. 936, 012002. doi:https://doi.org/10.1088/1742-6596/936/1/012002
- Persaud, S. Y., Ramamurthy, S., and Newman, R. C., 2015, "Internal Oxidation of Alloy 690 in Hydrogenated Steam," Corros. Sci., Vol. 90, pp. 606-613. doi:https://doi.org/10.1016/j.corsci.2014.11.006
- Kim, K. M., Shim, H. -S., Seo, M. J., and Hur, D. H., 2015, "Corrosion Control of Alloy 690 by Shot Peening and Electropolishing under Simulated Primary Water Condition of PWRs," Adv. Mater. Sci. Eng., Vol. 1, pp. 1-9. doi:https://doi.org/10.1155/2015/357624
- Wang, Y., Jin, J., Zhang, M.. Liu, F., Wang, X., Gong, P., and Tang, X., 2022, "Influence of Plastic Deformation on the Corrosion Behavior of CrCoFeMnNi High Entropy Alloy," J. Alloy. Compd., Vol. 891, 161822. doi:https://doi.org/10.1016/j.jallcom.2021.161822
- Zhao, M., Wu, H., Lu, J., Sun, G., and Du, L., 2022, "Effect of Grain Size on Mechanical Property and Corrosion Behavior of a Metastable Austenitic Stainless Steel," Mater. Charact., Vol. 194, 112360. doi:https://doi.org/10.1016/j.matchar.2022.112360
- Ura-Binczyk, E., 2021, "Effect of Grain Refinement on the Corros-ion Resistance of 316L Stainless Steel", Materials, Vol. 14, 7517. doi:https://doi.org/10.3390/mal4247517
- Dong, S., Chen, X. Chen, Plante, E. C. L., Gussev, M., and Leonard, K., 2020, "Elucidating the Grain-orientation Dependent Corrosion Rates of Austenitic Stainless Steels," Mater. Design, Vol. 191, 108583. doi:https://doi.org/10.1016/j.matdes.2020.108583