Journal of the Korean Society of Industry Convergence (한국산업융합학회 논문집)

The Korean Society of Industry Convergence (한국산업융합학회)
권호 표지
DOI QR코드

DOI QR Code

Reliability Prediction of High Performance Mooring Platform in Development Stage Using Safety Integrity Level and MTTFd

안전무결성 수준 및 MTTFd를 활용한 개발단계의 고성능 지상체 신뢰도 예측 방안

  • Min-Young Lee (Defense CBM+ Agile Team, Korea Institute of Science and Technology Information) ;
  • Sang-Boo Kim (Dept. of Industrial & Systems Engineering, Changwon National University) ;
  • In-Hwa Bae (Dept. of Industrial & Systems Engineering, Changwon National University) ;
  • So-Yeon Kang (Dept. of Industrial & Systems Engineering, Changwon National University) ;
  • Woo-Yeong Kwak (Dept. of Industrial & Systems Engineering, Changwon National University) ;
  • Sung-Gun Lee (HanGIS Co., Ltd.) ;
  • Keuk-Ki Oh (HanGIS Co., Ltd.) ;
  • Dae-Rim Choi (HanGIS Co., Ltd.)
  • 이민영 (한국과학기술정보연구원 국방CBMPlus애자일팀) ;
  • 김상부 (창원대학교 산업시스템공학과) ;
  • 배인화 (창원대학교 산업시스템공학과) ;
  • 강소연 (창원대학교 산업시스템공학과) ;
  • 곽우영 (창원대학교 산업시스템공학과) ;
  • 이성근 ((주)한지아이에스) ;
  • 오극기 ((주)한지아이에스) ;
  • 최대림 ((주)한지아이에스)
  • Received : 2024.05.12
  • Accepted : 2024.06.14
  • Published : 2024.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

System reliability prediction in the development stage is increasingly crucial to reliability growth management to satisfy its target reliability, since modern system usually takes a form of complex composition and various complicated functions. In most cases of development stage, however, the information available for system reliability prediction is very limited, making it difficult to predict system reliability more precisely as in the production and operating stages. In this study, a system reliability prediction process is considered when the reliability-related information such as SIL (Safety Integrity Level) and MTTFd (Mean Time to Dangerous Failure) is available in the development stage. It is suggested that when the SIL or MTTFd of a system component is known and the field operational data of similar system is given, the reliability prediction could be performed using the scaling factor for the SIL or MTTFd value of the component based on the similar system's field operational data analysis. Predicting a system reliability is then adjusted with the conversion factor reflecting the temperature condition of the environment in which the system actually operates. Finally, the case of applying the proposed system reliability prediction process to a high performance mooring platform is dealt with.

Keywords

Acknowledgement

이 연구는 대한민국 정부 (산업통상자원부, 방위사업청 및 과학기술정보통신부) 재원으로 민군협력진흥원에서 수행하는 민군기술협력(R&D) 사업의 연구비 지원으로 수행되었습니다. (과제번호 : 22-SN-GU-12, 과제고유번호 : 9991008691)

References

  1. K. Lee, W. Kim, Y. Chang, C. Chang and Y. Kim, "Reliability prediction of auxiliary power unit for 8200 series electric locomotive using SR-332," Proc. of the Korean Institute of Electrical Engineers, pp. 143-144, (2017).
  2. G. Lee, S. Kim, W. Park and K. Oh, "Reliability prediction of touch-machine control panel using MIL-HDBK-217F and Telcordia SR-332 : case study," Journal of the Korean Society of Systems Engineering, vol. 12, no. 2, pp. 9-18, (2016).
  3. Y. Park, "Case study of reliability prediction using FIDES," Proc. of the Korean Reliability Society, pp. 52-58, (2016).
  4. Y. Seo, G. Lee, Y. Lee and J. Kim, "Reliability prediction based on field failure data of guided missile," Journal of Applied Reliability, vol. 18, no. 3, pp. 250-259, (2018).
  5. C. Kim, J. Kim, G. Lee, Y. Lee, M. Kim, S. Jeong and M. Han, "Estimating the reliability prediction correction factor through field big data analysis of a one-shot device," Journal of Applied Reliability, vol. 21, no. 3, pp. 246-254, (2021).
  6. Y. Lee and W. Park, "Reliability projection using simulation on fix effectiveness factor : a case study of launcher system," Journal of the Korea Academia-Industrial cooperation Society, vol. 22, no. 9, pp. 391-398, (2021).
  7. Y. Cheng, H. Zhu, K. Hu, J. Wu, X. Shao and Y. Wang, "Reliability prediction of machinery with multiple degradation characteristics using double-Wiener process and Monte Carlo algorithm," Mechanical Systems and Signal Processing, vol. 134, (2019).
  8. A. Regattieri and A. Casto, F. Piana, M. Faccio and E. Ferrari, "Reliability prediction of a mechanical component through accelerated life testing," 24th International Conference on Production Research, (2017).
  9. D. Lee, S. Jung, B. Lee, G. Jeong, B. Park, D. Ahn and J. Jang, "Case study on reliability prediction of barrier type pulse separation device using stress-strength analysis," Journal of Applied Reliability, vol. 15, no. 2, pp. 124-130,
  10. S. Kim, Y. Seo, S. Lee and J. Kim, "Stu dy on the improvement of reliability prediction model," Journal of the Korea Academia- Industrial cooperation Society, vol. 22, no. 10, pp. 447-456, (2021).
  11. S. Peyghami, Z. Whang and F. Blaabjerg, "A guideline for reliability prediction in power electronic converters," IEEE Trans. on Power Electronics, vol. 35, no. 10, pp. 10958-10968, (2020).
  12. Y. Kim, "A study of reliability prediction using machine learning model," Journal of the Korean Institute of Plant Engineering, vol. 26, no. 4, oo. 21-30, (2021).
  13. Department of Defense, "Military hand book : reliability prediction of electron ic equipment, MIL-HDBK-217F Notice 2" (1995).
  14. GESSMANN, "Single-axis controller (S26) databook," (2021).
  15. Bosch Rexroth Oil Control, "Solenoid operated valves pilot operated poppet type 2-way normally open common cavity, size 08 data book," (2021).
  16. IEC 61508, "Functional safety of electrical/electronic/programmable electronic safety-related systems," (2015).
  17. ISO 13849-1, "Safety of machinery safety-related parts of control systems, part 1 : general principles for design," (2015).
  18. Quanterion, "System reliability toolkit- V : new approaches and practical applications," (2015).