과제정보
The financial support provided by the Slovenian Research Agency, grants P2-0026 and P2-0405 are gratefully acknowledged. This work was supported by the Helmholtz European Partnering Program in the project "Crossing borders and scales (Crossing)".
참고문헌
- J. Yan, Q. Bi, Z. Liu, G. Zhu, L. Cai, Subcooled flow boiling heat transfer of water in a circular tube under high heat fluxes and high mass fluxes, Fusion Eng. Des. 100 (2015) 406-418, http://dx.doi.org/10.1016/j.fusengdes.2015.07.007.
- A. C.Kheirabadi, D. Groulx, Cooling of server electronics: A design review of existing technology, Appl. Therm. Eng. 105 (2016) 622-638, http://dx.doi.org/10.1016/j.applthermaleng.2016.03.056.
- Y. Zhang, D. Wang, J. Lin, J. Hao, Development of a computer code for thermal-hydraulic design and analysis of helically coiled tube once-through steam generator, Nucl. Eng. Technol. 49 (7) (2017) 1388-1395, http://dx.doi.org/10.1016/j.net.2017.06.017.
- D. Lu, Q. Su, P. Ju, L. Lv, Overview on critical heat flux experiment for the reactor fuel assemblies, Ann. Nucl. Energy 163 (2021) 108585, http://dx.doi.org/10.1016/j.anucene.2021.108585.
- S. Gong, L. Zhang, P. Cheng, E.N. Wang, Understanding triggering mechanisms for critical heat flux in pool boiling based on direct numerical simulations, Int. J. Heat Mass Transfer 163 (2020) 120546, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2020.120546.
- X. Zhang, R. Li, M. Peng, T. Cong, C. He, G. Xia, X. Wei, Numerical analysis on subcooled boiling in PWR coolant channel based on a modified multi-scale interface model, Appl. Therm. Eng. 229 (2023) 120598, http://dx.doi.org/10.1016/j.applthermaleng.2023.120598.
- B. Smith, Assessment of CFD codes used in nuclear reactor safety simulations, Nucl. Eng. Technol. 42 (2010) http://dx.doi.org/10.5516/NET.2010.42.4.339.
- M. Leskovar, M. Ursic, Ex-vessel steam explosion analysis for pressurized water reactor and boiling water reactor, Nucl. Eng. Technol. 48 (1) (2016) 72-86, http://dx.doi.org/10.1016/j.net.2015.08.012.
- R. Knief, Nuclear Engineering: Theory and Technology of Commercial Nuclear Power, American Nuclear Society, 2008.
- R.T. Lahey, E. Baglietto, I.A. Bolotnov, Progress in multiphase computational fluid dynamics, Nucl. Eng. Des. 374 (2021) 111018, http://dx.doi.org/10.1016/j.nucengdes.2020.111018.
- M. Ishii, T. Hibiki, Thermo-Fluid Dynamics of Two-Phase Flow, Springer, 2006.
- J. Chahed, V. Roig, L. Masbernat, Eulerian-Eulerian two-fluid model for turbulent gas-liquid bubbly flows, Int. J. Multiph. Flow 29 (1) (2003) 23-49, http://dx.doi.org/10.1016/s0301-9322(02)00123-4.
- E. Krepper, R. Rzehak, C. Lifante, T. Frank, CFD for subcooled flow boiling: Coupling wall boiling and population balance models, Nucl. Eng. Des. 255 (2013) 330-346, http://dx.doi.org/10.1016/j.nucengdes.2012.11.010.
- A. Gajsek, B. Koncar, M. Tekavcic, A. Prosek, Validation of two-fluid boiling flow model on the DEBORA benchmark experimental data, in: NENE 2021 Conference Proceedings, no. 620, Bled, Slovenia, 2021.
- E. Krepper, R. Rzehak, CFD for subcooled flow boiling: Simulation of DEBORA experiments, Nucl. Eng. Des. 241 (9) (2011) 3851-3866, http://dx.doi.org/10.1016/j.nucengdes.2011.07.003.
- L. Vyskocil, J. Macek, Boiling flow simulation in neptune-CFD and fluent codes, in: Proceedings of the Workshop on Experiments and CFD Code Application to Nuclear Reactor Safety, no. 1027, XCFD4NRS, Nuclear Energy Agency of the OECD (NEA), Bled, Slovenia, 2008.
- Y. Alatrash, Y.J. Cho, C.-H. Song, H.Y. Yoon, Investigation of subcooled boiling wall closures at high pressure using a two-phase CFD code, Nucl. Eng. Technol. 54 (6) (2022) 2276-2296, http://dx.doi.org/10.1016/j.net.2021.12.012.
- S. Mimouni, F. Archambeau, M. Boucker, J. Lavieville, C. Morel, A second order turbulence model based on a Reynolds stress approach for two-phase boiling flow and application to fuel assembly analysis, Nucl. Eng. Des. 240 (9) (2010) 2225-2232, http://dx.doi.org/10.1016/j.nucengdes.2009.11.020.
- W. Yao, C. Morel, Volumetric interfacial area prediction in upward bubbly two-phase flow, Int. J. Heat Mass Transfer 47 (2) (2004) 307-328, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2003.06.004.
- J.Y. Tu, G.H. Yeoh, G.-C. Park, M.-O. Kim, On Population Balance Approach for Subcooled Boiling Flow Prediction, J. Heat Transfer 127 (3) (2005) 253-264, http://dx.doi.org/10.1115/1.1857952.
- H. Setoodeh, W. Ding, D. Lucas, U. Hampel, Modelling and simulation of flow boiling with an Eulerian-Eulerian approach and integrated models for bubble dynamics and temperature-dependent heat partitioning, Int. J. Therm. Sci. 161 (2021) 106709, http://dx.doi.org/10.1016/j.ijthermalsci.2020.106709.
- J. Peltola, T. Pattikangas, W. Bainbridge, R. Lehnigk, F. Schlegel, On development and validation of subcooled nucleate boiling models for openfoam foundation release, in: 18th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH 2019, American Nuclear Society (ANS), United States, 2019, pp. 2149-2163.
- M. Colombo, M. Fairweather, Accuracy of Eulerian-Eulerian, two-fluid CFD boiling models of subcooled boiling flows, Int. J. Heat Mass Transfer 103 (2016) 28-44, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2016.06.098.
- D. Vlcek, Y. Sato, Sensitivity analysis for subcooled flow boiling using Eulerian CFD approach, Nucl. Eng. Des. 405 (2023) http://dx.doi.org/10.1016/j.nucengdes.2023.112194.
- Ansys fluent theory guide, release 21, Ansys Inc, 275 Technology Drive Canonsburg, PA 15317, 2021.
- J. Garnier, E. Manon, G. Cubizolles, Local measurements on flow boiling of refrigerant 12 in a vertical tube, Multiphase Sci. Technol. 13 (1,2) (2001) 1-113, http://dx.doi.org/10.1615/MultScienTechn.v13.i1-2.10.
- M.J. Prince, H.W. Blanch, Bubble coalescence and break-up in air-sparged bubble columns, AIChE J. 36 (10) (1990) 1485-1499, http://dx.doi.org/10.1002/aic.690361004.
- H. Luo, H.F. Svendsen, Theoretical model for drop and bubble breakup in turbulent dispersions, AIChE J. 42 (5) (1996) 1225-1233, http://dx.doi.org/10.1002/aic.690420505.
- Y. Liao, R. Rzehak, D. Lucas, E. Krepper, Baseline closure model for dispersed bubbly flow: Bubble coalescence and breakup, Chem. Eng. Sci. 122 (2015) 336-349, http://dx.doi.org/10.1016/j.ces.2014.09.042.
- F. Menter, Two-equation eddy-viscosity turbulence models for engineering applications, AIAA J. 32 (8) (1994) 1598-1605, http://dx.doi.org/10.2514/3.12149.
- Y. Sato, K. Sekoguchi, Liquid velocity distribution in two-phase bubble flow, Int. J. Multiph. Flow 2 (1) (1975) 79-95, http://dx.doi.org/10.1016/0301-9322(75)90030-0.
- W.E. Ranz, W. Marshall, Evaporation from drops : Part 2, Chem. Eng. Progress 48 (1952) 173-180.
- M. Ishii, N. Zuber, Drag coefficient and relative velocity in bubbly, droplet or particulate flow, AIChE J. 25 (5) (1979) 843-855, http://dx.doi.org/10.1002/aic.690250513.
- M. de Bertodano, Turbulent Bubbly Two-Phase Flow in a Triangular Duct (Ph.D. thesis), Rensselaer Polytechnic Institute, Troy, New York, 1991.
- A. Tomiyama, Struggle with computational bubble dynamics, Multiphase Sci. Technol. 10 (4) (1998) 369-405, http://dx.doi.org/10.1615/multscientechn.v10.i4.40.
- N. Kurul, M.Z. Podowski, On the modeling of multidimensional effects in boiling channels, in: 27th National Heat Transfer Conference, Mineapolis, Minnesota, USA, 1991.
- M. Lemmert, L.M. Chawla, Influence of Flow Velocity on Surface Boiling Heat Transfer Coefficient in Heat Transfer in Boiling, Academic Press and Hemisphere, New York, NY, USA, 1977.
- R. Cole, A photographic study of pool boiling in the region of the critical heat flux, AlChE J. 6 (1960) 533-542, http://dx.doi.org/10.1002/aic.690060405.
- V.I. Tolubinski, D.M. Kostanchuk, Vapor bubbles growth rate and heat transfer intensity at subcooled water boiling, in: Proceedings of 4th Internatonal Heat Transfer Conferencel, Paris, France, 1970.
- E.W. Lemmon, I.H. Bell, M.L. Huber, M.O. McLinden, Thermophysical properties of fluid systems, in: P.J. Linstrom, W.G. Mallard (Eds.), NIST chemical WebBook, NIST Standard Reference Database Number 69, National Institute of Standards and Technology, Gaithersburg, MD, http://dx.doi.org/10.18434/T4D303.
- B. Zajec, L. Cizelj, B. Koncar, Effect of mass flow rate on bubble size distribution in boiling flow in temperature-controlled annular test section, Exp. Therm Fluid Sci. 140 (2023) 110758, http://dx.doi.org/10.1016/j.expthermflusci.2022.110758.