References
- Zilberman O, Huggare JA, Parikakis KA : Evaluation of the validity of tooth size and arch width measurements using conventional and three-dimensional virtual orthodontic models. Angle Orthod, 73:301-306, 2003.
- Rheude B, Sadowsky PL, Ferriera A, Jacobson A : An evaluation of the use of digital study models in orthodontic diagnosis and treatment planning. Angle Orthod, 75:300-304, 2005.
- Fleming PS, Marinho V, Johal A : Orthodontic measurements on digital study models compared with plaster models: a systematic review. Orthod Craniofac Res, 14:1-16, 2011. https://doi.org/10.1111/j.1601-6343.2010.01503.x
- Bosoni C, Nieri M, Franceschi D, Souki BQ, Franchi L, Giuntini V : Comparison between digital and conventional impression techniques in children on preference, time and comfort: A crossover randomized controlled trial. Orthod Craniofac Res, 26:585-590, 2023. https://doi.org/10.1111/ocr.12648
- Dixit UB, Moorthy L : The use of interactive distraction technique to manage gagging during impression taking in children: a single-blind, randomised controlled trial. Eur Arch Paediatr Dent, 22:219-225, 2021. https://doi.org/10.1007/s40368-020-00582-2
- Stevens DR, Flores-Mir C, Nebbe B, Raboud DW, Heo G, Major PW : Validity, reliability, and reproducibility of plaster vs digital study models: comparison of peer assessment rating and Bolton analysis and their constituent measurements. Am J Orthod Dentofacial Orthop, 129:794-803, 2006. https://doi.org/10.1016/j.ajodo.2004.08.023
- Naidu D, Freer TJ : The evidence supporting methods of tooth width measurement: Part II. Digital models and intra-oral scanners. Aust Orthod J, 29:164-169, 2013. https://doi.org/10.2478/aoj-2013-0019
- Rossini G, Parrini S, Castroflorio T, Deregibus A, Debernardi CL : Diagnostic accuracy and measurement sensitivity of digital models for orthodontic purposes: A systematic review. Am J Orthod Dentofacial Orthop, 149:161-170, 2016. https://doi.org/10.1016/j.ajodo.2015.06.029
- Mangano A, Beretta M, Luongo G, Mangano C, Mangano F : Conventional Vs Digital Impressions: Acceptability, Treatment Comfort and Stress Among Young Orthodontic Patients. Open Dent J, 12:118-124, 2018. https://doi.org/10.2174/1874210601812010118
- Burhardt L, Livas C, Kerdijk W, van der Meer WJ, Ren Y : Treatment comfort, time perception, and preference for conventional and digital impression techniques: A comparative study in young patients. Am J Orthod Dentofacial Orthop, 150:261-267, 2016. https://doi.org/10.1016/j.ajodo.2015.12.027
- Naidu D, Freer TJ : The evidence supporting methods of tooth width measurement: Part I. Vernier calipers to stereophotogrammetry. Aust Orthod J, 29:159-163, 2013. https://doi.org/10.2478/aoj-2013-0018
- Singh S, Saraf BG, Indushekhar KR, Sheoran N : Estimation of the Intercanine Width, Intermolar Width, Arch Length, and Arch Perimeter and Its Comparison in 12-17-year-old Children of Faridabad. Int J Clin Pediatr Dent, 14:369-375, 2021. https://doi.org/10.5005/jp-journals-10005-1957
- Yilmaz H, Aydin MN : Digital versus conventional impression method in children: Comfort, preference and time. Int J Paediatr Dent, 29:728-735, 2019. https://doi.org/10.1111/ipd.12566
- Kardach H, Szponar-Zurowska A, Biedziak B : A Comparison of Teeth Measurements on Plaster and Digital Models. J Clin Med, 12:943, 2023.
- Gierie WV : Clear aligner therapy: An overview. J Clin Orthod, 52:665-674, 2018.
- Hwang HH, Chou CW, Chen YJ, Yao CC : An overview of digital intraoral scanners: Past, present and future-from an orthodontic perspective. Taiwan J Orthodont, 30:148-162, 2018.
- Shailendran A, Weir T, Freer E, Kerr B : Accuracy and reliability of tooth widths and Bolton ratios measured by ClinCheck Pro. Am J Orthod Dentofacial Orthop, 161:65-73, 2022. https://doi.org/10.1016/j.ajodo.2020.06.048
- Adobes Martin M, Lipani E, Bernes Martinez L, Alvarado Lorenzo A, Aiuto R, Garcovich D : Reliability of Tooth Width Measurements Delivered by the ClinCheck Pro 6.0 Software on Digital Casts: A Cross-Sectional Study. Int J Environ Res Public Health, 19:3581, 2022.
- Soto-Alvarez C, Fonseca GM, Viciano J, Aleman I, Rojas-Torres J, Zuniga MH, Lopez-Lazaro S : Reliability, reproducibility and validity of the conventional buccolingual and mesiodistal measurements on 3D dental digital models obtained from intra-oral 3D scanner. Arch Oral Biol, 109:104575, 2020.
- Rajshekar M, Julian R, Willams AM, Tennant M, Forrest A, Walsh LJ, Wilson G, Blizzard L : The reliability and validity of measurements of human dental casts made by an intra-oral 3D scanner, with conventional hand-held digital callipers as the comparison measure. Forensic Sci Int, 278:198-204, 2017. https://doi.org/10.1016/j.forsciint.2017.07.009
- Rosseto MC, Palma FM, Ferreira RI, Pinzan A, Vellini-Ferreira F : Comparative study of dental arch width in plaster models, photocopies and digitized images. Braz Oral Res, 23:190-195, 2009. https://doi.org/10.1590/S1806-83242009000200016
- Im J, Cha JY, Lee KJ, Yu HS, Hwang CJ : Comparison of virtual and manual tooth setups with digital and plaster models in extraction cases. Am J Orthod Dentofacial Orthop, 145:434-442, 2014. https://doi.org/10.1016/j.ajodo.2013.12.014
- Watanabe-Kanno GA, Abrao J, Miasiro Junior H, Sanchez-Ayala A, Lagravere MO : Reproducibility, reliability and validity of measurements obtained from Cecile3 digital models. Braz Oral Res, 23:288-295, 2009. https://doi.org/10.1590/S1806-83242009000300011
- Quimby ML, Vig KW, Rashid RG, Firestone AR : The accuracy and reliability of measurements made on computer-based digital models. Angle Orthod, 74:298-303, 2004.
- Leifert MF, Leifert MM, Efstratiadis SS, Cangialosi TJ : Comparison of space analysis evaluations with digital models and plaster dental casts. Am J Orthod Dentofacial Orthop, 136:16.E1-16, 2009. https://doi.org/10.1016/j.ajodo.2009.03.002
- Goonewardene RW, Goonewardene MS, Razza JM, Murray K : Accuracy and validity of space analysis and irregularity index measurements using digital models. Aust Orthod J, 24:83-90, 2008. https://doi.org/10.2478/aoj-2008-0012
- Mullen SR, Martin CA, Ngan P, Gladwin M : Accuracy of space analysis with emodels and plaster models. Am J Orthod Dentofacial Orthop, 132:346-352, 2007. https://doi.org/10.1016/j.ajodo.2005.08.044
- Redlich M, Weinstock T, Abed Y, Schneor R, Holdstein Y, Fischer A : A new system for scanning, measuring and analyzing dental casts based on a 3D holographic sensor. Orthod Craniofac Res, 11:90-95, 2008. https://doi.org/10.1111/j.1601-6343.2007.00417.x
- Schirmer UR, Wiltshire WA : Manual and computer-aided space analysis: a comparative study. Am J Orthod Dentofacial Orthop, 112:676-680, 1997. https://doi.org/10.1016/S0889-5406(97)70234-8
- De Luca Canto G, Pacheco-Pereira C, Lagravere MO, Flores-Mir C, Major PW : Intra-arch dimensional measurement validity of laser-scanned digital dental models compared with the original plaster models: a systematic review. Orthod Craniofac Res, 18:65-76, 2015. https://doi.org/10.1111/ocr.12068
- Santoro M, Ayoub ME, Pardi VA, Cangialosi TJ : Mesiodistal crown dimensions and tooth size discrepancy of the permanent dentition of Dominican Americans. Angle Orthod, 70:303-307, 2000.
- Uysal T, Sari Z : Intermaxillary tooth size discrepancy and mesiodistal crown dimensions for a Turkish population. Am J Orthod Dentofacial Orthop, 128:226-230, 2005. https://doi.org/10.1016/j.ajodo.2004.04.029
- McNamara JA Jr : Early intervention in the transverse dimension: is it worth the effort? Am J Orthod Dentofacial Orthop, 121:572-574, 2002. https://doi.org/10.1067/mod.2002.124167
- Grunheid T, Patel N, De Felippe NL, Wey A, Gaillard PR, Larson BE : Accuracy, reproducibility, and time efficiency of dental measurements using different technologies. Am J Orthod Dentofacial Orthop, 145: 157-164, 2014. https://doi.org/10.1016/j.ajodo.2013.10.012