Acknowledgement
본 연구는 과학기술정보통신부의 재원으로 한국연구재단의 지원을 받아 수행되었습니다(No. 2022R1F1A1074378).
References
- Al-Khafaji, K. R., Fattah, M. Y., and Al-Recaby, M. K. (2022), "Measurement of the Lateral Earth Pressure Coefficient of Clayey Soils by Modified Oedometer Test", Engineering and Technology Journal, Vol.40, No.11, pp.1376-1384.
- ASTM D4254 (2006), "Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density", Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, USA.
- Ishihara, K. (1993), "Liquefaction and Flow Failure during Earthquakes", Geotechnique, Vol.43, No.3, pp.351-451. https://doi.org/10.1680/geot.1993.43.3.351
- Keskin, M. S., Bildik, S., and Laman, M. (2023), "Experimental and Numerical Studies of Vertical Stresses Beneath the Circular Footings on Sand", Applied Sciences, Vol.13, No.3.
- Keskin, S., Laman, M., and Baran, T. (2008), "Experimental Determination and Numerical Analysis of Vertical Stresses under Square Footings Resting on Sand", Teknik Dergi, Vol.19, No.4, pp.4521-4538.
- Kootahi, K. and Leung, A. K. (2022), "Effect of Soil Particle Size on the Accuracy of Tactile Pressure Sensors", Journal of Geotechnical and Geoenvironmental Engineering, Vol.148, No.10.
- KS F 2032 (2002), "The Method for Particle Size Distribution of Soils", Korean Standard, Korean Agency for Technology and Standards, Chungcheonbuk-do, Korea.
- KS F 2308 (2016), "Standard Test Method for Density of Soil Particles", Korean Standard, Korean Agency for Technology and Standards, Chungcheonbuk-do, Korea.
- Labuz, J. F. and Theroux, B. (2005), "Laboratory Calibration of Earth Pressure Cells", Geotechnical Testing Journal, Vol.28, No.2, pp.188-196. https://doi.org/10.1520/GTJ12089
- Lee, C., Shin, E., and Yang, T. (2022), "Analysis of Reinforcement Effect of Hollow Modular Concrete Block on Sand by Laboratory Model Tests", Journal of the Korean Geotechnical Society, Vol.38, No.7, pp.49-62. https://doi.org/10.7843/KGS.2022.38.7.49
- Lim, J. (2004), "An Experimental Investigation of Boussinesq's Theoretical Value of Vertical Stress Increment in Sandy Soil Mass Caused by Surface Strip Loading", Journal of the Korean Geotechnical Society, Vol.20, No.9, pp.7-15.
- Nam, H.-S. and Lee, S.-H. (2010), "Characteristics of Vertical Stress Distribution in Sandy Soil According to the Relative Compaction and Composition of the Soil Layer", Journal of the Korean Society of Agricultural Engineers, Vol.52, No.2, pp.43-50. https://doi.org/10.5389/KSAE.2010.52.2.043
- Paikowsky, S. G., Palmer, C. J., and Rolwes, L. E. (2006), "The Use of Tactile Sensor Technology for Measuring Soil Stress Distribution", GeoCongress 2006: Geotechnical Engineering in the Information Technology Age, pp.1-6.
- Peattie, K. R. and Sparrow, R. (1954), "The Fundamental Action of E arth P ressu re C ells", Journal of the Mechanics and Physics of Solids, Vol.2, No.3, pp.141-155. https://doi.org/10.1016/0022-5096(54)90021-6
- Shin, S., Lee, H., and Woo, S. I. (2022), "Experimental Assessment of Reduction in the Negative Skin Friction Using a Pile with a Member Responding to Ground Deformation", Journal of the Korean Geotechnical Society, Vol.38, No.3, pp.5-16.
- Tekscan (2020), Best practices in mechanical integration of the FlexiForceTM sensor, Tekscan Inc, South Boston, MA.
- Theroux, B., Labuz, J. F., and Dai, S. (2001), "Field Installation of an Earth Pressure Cell", Transportation Research Record, Vol.1772, No.1, pp.12-19. https://doi.org/10.3141/1772-02
- Useche-Infante, D., Aiassa-Martinez, G., Arrua, P., and Eberhardt, M. (2018), "Scale Model to Measure Stress under Circular Footings Resting on Sand", International Journal of Geotechnical Engineering, Vol.15, No.7, pp.877-886. https://doi.org/10.1080/19386362.2018.1541626
- Weiler Jr, W. A., and Kulhawy, F. H. (1982), "Factors Affecting Stress Cell Measurements in Soil", Journal of the Geotechnical Engineering Division, Vol.108, No.12, pp.1529-1548. https://doi.org/10.1061/AJGEB6.0001393
- Zarkiewicz, K., and Qatrameez, W. (2021), "Assessment of Stress in the Soil Surrounding the Axially Loaded Model Pile by Thin, Flexible Sensors", Sensors, Vol.21, No.21, pp.7214.
- Zhu, B., Jardine, R., and Foray, P. (2009), "The Use of Miniature Soil Stress Measuring Cells in Laboratory Applications Involving Stress Reversals", Soils and Foundations, Vol.49, No.5, pp.675-688. https://doi.org/10.3208/sandf.49.675