DOI QR코드

DOI QR Code

In-Structure Response Spectra of Seismically Isolated Shear Buildings Considering Eccentricity Effect

면진된 전단 거동 구조물의 층응답스펙트럼에 대한 편심효과

  • Lee, Seung Jae (Department of Civil Engineering, Pusan National University) ;
  • Kim, Jung Han (Department of Civil Engineering, Pusan National University)
  • 이승재 (부산대학교 토목공학과) ;
  • 김정한 (부산대학교 토목공학과)
  • Received : 2023.10.18
  • Accepted : 2023.11.06
  • Published : 2024.01.01

Abstract

For important structures such as nuclear power plants, In-Structure Response Spectrum (ISRS) analysis is essential because it evaluates the safety of equipment and components installed in the structure. Because most structures are asymmetric, the response can be affected by eccentricity. In the case of seismically isolated structures, this effect can be greater due to the difference between the center of mass of the structure and the center of rigidity of the isolator layer. Therefore, eccentricity effects must be considered when designing or evaluating the ISRS of seismically isolated structures. This study investigated the change of the ISRS of an isolated structure by assuming accidental eccentricity. The variables that affect the ISRS of the isolated structure were analyzed to see what additional impact they had due to eccentricity. The ISRS of the seismically isolated structure with eccentricity was amplified more than when there was non-eccentricity, and it was boosted more significantly in specific period ranges depending on the isolator's initial stiffness and seismic intensity. Finally, whether the displacement requirement of isolators can be applied to the variation of the ISRS due to eccentricity in the design code was also examined.

Keywords

Acknowledgement

이 과제는 부산대학교 기본연구지원사업(2년)에 의하여 연구되었음.

References

  1. NRC. Development of floor design response spectra for seismic design of floor-supported equipment or components regulatory guide 1.122. US Nuclear Regulatory Commission; c1978.
  2. ASCE. Seismic analysis of safety-related nuclear structures ASCE/SEI 4-16. American Society of Civil Engineers; c2017.
  3. Ju HK, Choun YS, Kim MK. Peak-Broadening of floor response spectra for base isolated nuclear structures. In Transactions of the Korean Nuclear Society Autumn Meeting. Gyeongju, Korea; c2015.
  4. Lee SJ, Kim JH. Considerations for the generation of in-structure response spectra in seismically isolated structures. Earthquake Engineering Society of Korea. 2022 Mar;26(2):95-103. https://doi.org/10.5000/EESK.2022.26.2.095
  5. ASCE. Minimum design loads and associated criteria for buildings and other structures ASCE/SEI 7-16. American Society of Civil Engineers; c2017.
  6. Park HK, Kim JH, Kim MK. Considerations for the evaluation of floor spectra of a seismically isolated structure. Transactions of the Korean Nuclear Society Autumn Meeting, Gyeongju, Korea; c2015.
  7. Jung JW, Lee SM, Hong JW. Floor response spectrum analysis of a base-isolated nuclear power plant. Computational Structural Engineering Institute of Korea. 2016 Aug;29(4):355-362. https://doi.org/10.7734/COSEIK.2016.29.4.355
  8. Devikashree ML, Jayashankara BBS. A study on effect of eccentricity in RC frame structures. International Journal of Innovative Research in Science, Engineering and Technology. 2017 Jun;6(6).
  9. Mohamed SM, Osama M, Feda I. Torsional behavior of irregular buildings with single eccentricity. Materials Science and Engineering; c2019.
  10. Salih C, Abdulkadir S, Alptug U, Mehmet K. Effect of eccentricity on the internal forces on the columns of a reinforced concrete building. Selcuk University Journal of Engineering Sciences. 2022 Dec;21(3):138-142.
  11. Wolff ED, Ipek C, Constantinou MC, Morillas L. Torsional response of seismically isolated structures revisited. Engineering Structures. 2014;462-468.
  12. Hassan WM. Assessment of ASCE 7-16 seismic isolation bearing torsional displacement. International Journal of Civil Engineering; c2019.
  13. Skinner RI, Robinson WH, Mcverry GH. An introduction to seismic isolation. New York; John Wiley & Sons, Inc; c1993. 354 p.
  14. Naeim F, Kelly JM. Design of seismic isolated structures from theory to practice. USA; John Wiley & Sons, Inc; c1999. 289 p.
  15. Huang Y, Whittaker AS, Kennedy RP, Mayes RL. Assessment of base-isolated nuclear structures for design and beyond-design basis earthquake shaking. Technical Report MCEER-09-0008. Buffalo NY: MCEER; c2009.
  16. Ali A, Hayah NA, Kim DK, Cho SG. Probabilistic seismic assessment of base-isolated NPPs subjected to strong ground motions of Tohoku earthquake. Nuclear Engineering and Technology. 2014 Jun 13;46(5):699-706. https://doi.org/10.5516/NET.09.2014.030
  17. Kim JH, Choi IK, Kim MK. Estimation of the isolator displacement for the performance based design of nuclear power plants. Earthquake Engineering Society of Korea. 2014 Nov;18(6):291-299. https://doi.org/10.5000/EESK.2014.18.6.291
  18. NRC, Design response spectra for seismic design of nuclear power plants regulatory guide 1.60. US Nuclear Regulatory Commission; c1973.
  19. P-CARES, Probabilistic computer analysis for rapid evaluation of structures. U.S. Nuclear Regulatory Commission Office of Nuclear Regulatory Research Washington, DC 20555-0001, NUREG/CR-6922; c2007.