Journal of Drive and Control (드라이브 ㆍ 컨트롤)

The Korean Society for Fluid Power and Construction Equipment (유공압건설기계학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Digital Fault Detection Systems for Screening Open and Short of Wire Harness

와이어 하네스 단선 단락 선별을 위한 디지털 고장 검출 시스템 개발

  • A Ran Kim (Department of Mechanical Engineering, Kunsan National University) ;
  • Jae Wan Park (Jaehyun Innovation Technology Company Limited) ;
  • Ha Seon Kim (Department of Mechanical Engineering, Kunsan National University) ;
  • Jae Hoon Jeong (School of Software, Kunsan National University) ;
  • Sun Young Kim (School of Mechanical Engineering, Kunsan National University)
  • 김아란 ;
  • 박재완 ;
  • 김하선 ;
  • 정재훈 ;
  • 김선영
  • Received : 2023.04.05
  • Accepted : 2023.11.30
  • Published : 2023.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Wire harness is a component for efficient control when electronic parts are required such as construction machinery and electric vehicles. With emerging issues such as autonomous driving and automation in construction, a wire harness composed of multiple cables has become an essential part because more electronic parts are required. However, when a wire harness failure occurs, systems can be stopped, accidents can occur, and economic damage can be significant. Therefore, in this paper, we developed a digital fault screening system that could easily and quickly diagnose faults in the wire harness. The principle of the developed system was to sequentially send pulse signals to the wire harness and use returned signals to perform fault detection. As a result of diagnosing faults using the developed failure detection system, a detection accuracy of 99.9 % was confirmed through the experiments.

Keywords

Acknowledgement

이 연구는 2022년도 정부(산업통상자원부)의 재원으로 한국산업기술진흥원의 지원을 받아 수행된 연구임(P0012769, 2022년 산업혁신인재성장지원사업).

References

  1. J. G. Yoo, J. C. Jeon and T. H. Kim, "The Estimation Techniques of Cable Fault Type and Location," In Proceedings of the KIPE Conference (in Korean), pp.1-2, 2014.
  2. H. G. Nguyen, M. Kuhn and J. Franke, "Manufacturing Automation for Automotive Wiring Harnesses," Procedia CIRP, Vol.97, pp.379-384, 2021. https://doi.org/10.1016/j.procir.2020.05.254
  3. R. Guerrero, A. Serrano-Hernandez, J. Pascual and J. Faulin, "Simulation Model for Wire Harness Design in the Car Production Line Optimization Using the SimPy Library," Sustainability, Vol.14, No.12, pp.7212, 2022.
  4. B. Agard and M. Tollenaere, "Design of Harnesses for Mass Customization," In 4th International Conference on Integrated Design and Manufacturing in Technical Engineering, pp.53-62, 2002.
  5. R. K. Sokas, X. S. Dong and C. T. Cain, "Building a Sustainable Construction Workforce," International Journal of Environmental Research and Public Health, Vol.16, No.21, pp.4202, 2019.
  6. I. Calvo-Sotomayor, J. P. Laka and R. Aguado, "Workforce Ageing and Labour Productivity in Europe," Sustainability, Vol.11, No.20, pp.5851, 2019.
  7. J. H. Won et. al., "Study on Traveling Characteristics of Straight Automatic Steering Devices for Drivable Agricultural Machinery," Journal of Drive and Control (in Korean), Vol.19, No.4 pp.19-28, 2022. https://doi.org/10.7839/KSFC.2022.19.4.019
  8. M. K. Seo et. al., "Development of Onboard Scales to Measure the Weight of Trucks," Journal of Drive and Control (in Korean), Vol.18, No.1, pp.9-16, 2021.
  9. S. Rowlinson, Construction Safety Management Systems, Routledge, London, 2004.
  10. H. Yang, D. A. Chew, W. Wu, Z. Zhou and Q. Li, "Design and Implementation of an Identification System in Construction Site Safety for Proactive Accident Prevention," Accident Analysis & Prevention, Vol.48, pp.193-203, 2012. https://doi.org/10.1016/j.aap.2011.06.017
  11. H. S. Baek, J. H. Shin and S. J. Kim, "Development of AI-Based Condition Monitoring System for Failure Diagnosis of Excavator's Travel Device," Journal of Drive and Control (in Korean), Vol.18, No.1, pp.24-30, 2021. https://doi.org/10.7839/KSFC.2021.18.1.024
  12. Y. K. Kang and J. S. Jang, "A Study on the Automatic Impact Force Control Mechanism Design for the Hydraulic," Journal of Drive and Control (in Korean), Vol.19, No.3 pp.1-8, 2022. https://doi.org/10.7839/KSFC.2022.19.3.001
  13. C. Wu, X. Li, Y. Guo, J. Wang, Z. Ren, M. Wang and Z. Yang, "Natural Language Processing for Smart Construction: Current Status and Future Directions," Automation in Construction, Vol.134, pp.104059, 2022.
  14. A. Choudhary, S. Fatima and B. K. Panigrahi, "State of the Art Technologies in Fault Diagnosis of Electric Vehicles: A Component-Based Review," IEEE Transactions on Transportation Electrification, 2022.
  15. S. S. Bang and Y. J. Shin, "Classification of Faults in Multicore Cable via Time-Frequency Domain Reflectometry," IEEE Transactions on Industrial Electronics, Vol.67, No.5, pp.4163-4171, 2019.
  16. Q. Shi, U. Troeltzsch and O. Kanoun, "Detection and Localization of Cable Faults by Time and Frequency Domain Measurements," In 2010 7th International Multi-Conference on Systems, Signals and Devices, pp.1-6, 2010.
  17. C. K. Lee and S. J. Chang, "Fault Detection in Multi-Core C&I Cable via Machine Learning Based Time-Frequency Domain Reflectometry," Applied Sciences, Vol.10, No.1, pp.158, 2019.
  18. J. Zhang, Y. Zhang and Y. Guan, "Analysis of Time-Domain Reflectometry Combined with Wavelet Transform for Fault Detection in Aircraft Shielded Cables," IEEE Sensors Journal, Vol.16, No.11, pp.4579-4586, 2016. https://doi.org/10.1109/JSEN.2016.2547323
  19. X. Huang, Q. Guo, C. Cai, Y. Chen, X. Ou, C. He and G. Ji, "Fault Diagnosis and Location for Long Submarine Cable Based on Frequency Domain Refection," In 2020 IEEE 4th Conference on Energy Internet and Energy System Integration (EI2), pp.4047-4050, 2020.
  20. C. Furse, Y. C. Chung, R. Dangol, M. Nielsen, G. Mabey and R. Woodward, "Frequency-Domain Reflectometry for On-Board Testing of Aging Aircraft Wiring," IEEE Transactions on Electromagnetic Compatibility, Vol.45, No.2, pp.306-315, 2003. https://doi.org/10.1109/TEMC.2003.811305
  21. B. Adebisi, A. Sutherland and B. Honary, "Wire Integrity Testing Using Intermodulation Product Processing," In 2008 IEEE International Symposium on Power Line Communications and Its Applications, pp.213-217, 2008.
  22. Y. J. Shin, E. J. Powers, T. S. Choe, C. Y. Hong, E. S. Song, J. G. Yook and J. B. Park, "Application of Time-Frequency Domain Reflectometry for Detection and Localization of a Fault on a Coaxial Cable," IEEE Transactions on Instrumentation and Measurement, Vol.54, No.6, pp.2493-2500, 2005. https://doi.org/10.1109/TIM.2005.858115
  23. A. R. Kim, H. S. Kim, J. W. Park, J. H. Jeong and S. Y. Kim, "Development of Cable Fault Detector to Prevent System Malfunction," Proceedings of the KSFC 2022 Fall Conference (in Korean), pp.125-126, 2022.
  24. R. C. Gleichman, "Failure Modes and Field Testing of Medium-Voltage Motor Windings," IEEE Transactions on Industry Applications, Vol.38, No.5, pp.1473-1476, 2002. https://doi.org/10.1109/TIA.2002.802913
  25. K. C. Han and Y. S. Choi, "Study on Leakage Current and Insulation Resistance Effect of Temperature and Humidity," Journal of IKEEE (in Korean), Vol.23, No.2, pp.370-374, 2019. https://doi.org/10.7471/IKEEE.2019.23.2.370