DOI QR코드

DOI QR Code

Calculation method and application of natural frequency of integrated model considering track-beam-bearing-pier-pile cap-soil

  • Yulin Feng (School of Civil Engineering and Architecture, East China Jiaotong University) ;
  • Yaoyao Meng (School of Civil Engineering and Architecture, East China Jiaotong University) ;
  • Wenjie Guo (School of Civil Engineering and Architecture, East China Jiaotong University) ;
  • Lizhong Jiang (Central South University, National Engineering Research Center of High-speed Railway Construction Technology) ;
  • Wangbao Zhou (Central South University, National Engineering Research Center of High-speed Railway Construction Technology)
  • 투고 : 2022.10.09
  • 심사 : 2023.07.04
  • 발행 : 2023.10.10

초록

A simplified calculation method of natural vibration characteristics of high-speed railway multi-span bridge-longitudinal ballastless track system is proposed. The rail, track slab, base slab, main beam, bearing, pier, cap and pile foundation are taken into account, and the multi-span longitudinal ballastless track-beam-bearing-pier-cap-pile foundation integrated model (MBTIM) is established. The energy equation of each component of the MBTIM based on Timoshenko beam theory is constructed. Using the improved Fourier series, and the Rayleigh-Ritz method and Hamilton principle are combined to obtain the extremum of the total energy function. The simplified calculation formula of the natural vibration frequency of the MBTIM under the influence of vertical and longitudinal vibration is derived and verified by numerical methods. The influence law of the natural vibration frequency of the MBTIM is analyzed considering and not considering the participation of each component of the MBTIM, the damage of the track interlayer component and the stiffness change of each layer component. The results show that the error between the calculation results of the formula and the numerical method in this paper is less than 3%, which verifies the correctness of the method in this paper. The high-order frequency of the MBTIM is significantly affected considering the track, bridge pier, pile soil and pile cap, while considering the influence of pile cap on the low-order and high-order frequency of the MBTIM is large. The influence of component damage such as void beneath slab, mortar debonding and fastener failure on each order frequency of the MBTIM is basically the same, and the influence of component damage less than 10m on the first fourteen order frequency of the MBTIM is small. The bending stiffness of track slab and rail has no obvious influence on the natural frequency of the MBTIM, and the bending stiffness of main beam has influence on the natural frequency of the MBTIM. The bending stiffness of pier and base slab only has obvious influence on the high-order frequency of the MBTIM. The natural vibration characteristics of the MBTIM play an important guiding role in the safety analysis of high-speed train running, the damage detection of track-bridge structure and the seismic design of railway bridge.

키워드

과제정보

This work was supported by the National Natural Science Foundation of China (52268074, 52368047), the Open Foundation of National Engineering Research Center of High-speed Railway Construction Technology (HSR202202), the State Key Laboratory of Performance Monitoring and Protecting of Rail Transit Infrastructure (HJGZ2021211), and Jiangxi, Hunan Provincial Natural Science Foundation (20224BAB214073, 20232BAB204081, 2023JJ40724).

참고문헌

  1. Bao, S., Wang, S. and Wang, B. (2017a), "An improved Fourier-Ritz method for analyzing in-plane free vibration of sectorial plates", J. Appl. Mech, 84(9), 091001. https://doi.org/10.1115/1.4037030.
  2. Bao, S. and Wang, S. (2017b), "A generalized solution procedure for in-plane free vibration of rectangular plates and annular sectorial plates", Roy Soc Open Sci., 4(8). 170484. https://doi.org/ 10.1098/rsos.170484.
  3. Feng, Y., Hou, Y., Jiang, L., Zhou, W., Yu, J. and Guo, W. (2021a), "Stochastic transverse earthquake-induced damage track irregularity spectrum considering the uncertainty of track-bridge system", Int. J. Struct. Stab. Dyn., 21(14), 2140004. https://doi.org/10.1142/S0219455421400046.
  4. Feng, Y., Jiang, L., Zhou, W. and Chen, M. (2021b), "Post-earthquake track irregularity spectrum of high-speed railways continuous girder bridge", Steel Compos. Struct., 40(3), 323-338. https://doi.org/10.12989/scs.2021.40.3.323.
  5. Feng, Y., Jiang, L., Zhou, W., Zhang, Y. and Liu, X. (2021c), "An analytical solution to the vibration characteristics for continuous girder bridge-track coupling system and its application", Struct. Eng. Mech., 77(5), 601-612. https://doi.org/10.12989/SEM.2021.77.5.601.
  6. Feng, Q., Yang, Z., Guo, W., Lu, J. and Liang, Y. (2021), "Research on band gap calculation method of periodic structure based on artificial spring model", J. Theor. Appl. Mech., 53(06), 1684-1697. (In Chinese).
  7. Feng, Y., Hou, Y., Jiang, L., Zhou, W., Li, H. and Yu, J. (2022a), "Failure mode of interlayer connection of longitudinally-connected ballastless track-bridge system under uneven pier settlement", Constr Build Mater., 351(10), 128805 https://doi.org/10.1016/J. CONBUILDMAT.2022.128805.
  8. Feng, Y., Li, H., Yu, J., Jiang, L., Zhou, W. and Wu, G (2022b), "Applicability of existing CRTS II ballastless track-continuous girder bridge system under near-field transverse rare earthquake", Eng. Struct., 273(15), 115076. https://doi.org/10.1016/j.engstruct.2022.115076.
  9. Guo, W., Yang, Z., Feng, Q., Dai, C., Yang, J. and Lei, X. (2022) "A new method for band gap analysis of periodic structures using virtual spring model and energy functional variational principle", Mech Syst Signal Pr., 168(1), 108634. https://doi.org/10.1016/j.ymssp. 2021.108634.
  10. Hjiaj, M., Battini, J. and Nguyen, Q. (2012), "Large displacement analysis of shear deformable composite beams with interlayer slips", Int J Non Linear Mech., 47(8), 895-904. https://doi.org/10.1016/j.ijnonlinmec.2012.05.001.
  11. Jiang, L., Feng, Y., Zhou, W. and He, B. (2018), "Analysis on natural vibration characteristics of steel-concrete composite truss beam", Steel Compos. Struct., 26(1), 79-87. https://doi.org/10.12989/scs.2018.26.1.079.
  12. Jiang, L., Feng, Y., Zhou, W. and He, B. (2019), "Vibration characteristic analysis of high-speed railway simply supported beam bridge-track structure system", Steel Compos. Struct., 31(6), 591-600. https://doi.org/ 10.12989/scs.2019.31.6.591.
  13. Kimani, S.K. and Kaewunruen, S. (2017), "Free vibrations of precast modular steel-concrete composite railway track slabs", Steel Compos. Struct., 24(1), 113-128. http://dx.doi.org/10.12989/scs.2017.24.1.113.
  14. Lin, H. (2008) "On the natural frequencies and mode shapes of a multi-span and multi-step beam carrying a number of concentrated elements", Struct. Eng. Mech., 29(5). 531-550. https://doi.org/ 10.12989/SEM.2008.29.5.531.
  15. Nguyen, Q., Hjiaj, M. and Grognec, P. (2012), "Analytical approach for free vibration analysis of two-layer Timoshenko beams with interlayer slip", J. Sound Vib., 331(12), 2949-2961. https://doi. org/10.1016/j.jsv.2012.01.034.
  16. Wang, J., Liu, T. and Chen, D. (2007) "Free vibration analysis of a Timoshenko beam carrying multiple spring-mass systems with the effects of shear deformation and rotary inertia", Struct. Eng. Mech., 26(1), 1-14. https://doi.org/ 10.12989/SEM.2007.26.1.001.
  17. Wu, D., Zhang, J., Chen, J. and Li, Q. (2015), "Free Vibration Characteristic Analysis for Foundation-pier-beam System", China Civil Eng. J., 48(04), 65-71. (In Chinese).
  18. Zheng, D., Du, J. and Liu, Y. (2021), "Vibration characteristics analysis of an elastically restrained cylindrical shell with arbitrary thickness variation", Thin Wall Struct, 165(8), 107930 https://doi.org/10.1016/J.TWS.2021.107930.
  19. Zhou, W., Jiang, L. and Yu, Z. (2013), "Analysis of free vibration characteristic of steel-concrete composite box-girder considering shear lag and slip", J. Central. South Univ., 20(9), 2570-2577. https://doi.org/ 10.1007/s11771-013-1770-x.
  20. Zhang, J., Li, T., Zhu, X. and Guo, W. (2019), "Free Vibration Characteristics of Plates with Complicated Shapes Based on an Improved Rayleigh-Ritz Method", J. Vib. Shock, 38(19), 45-51. (In Chinese).
  21. Zhou, J., Wu, D., Li, Q. and Gao, P. (2006), "Variation of Free Vibration Characteristic Analysis for Pier-Beam System by energy method", China Civil Eng. J., 39(1), 60-64. [In Chinese].
  22. Zhou, W., Jiang, L., Huang, Z. and Li, S. (2016), "Flexural natural vibration characteristics of composite beam considering shear deformation and interface slip", Steel Compos. Struct., 20(5), 1023-1042. http://dx.doi.org/10.12989/scs.2016.20.5.1023.