DOI QR코드

DOI QR Code

Behavior and modeling of RC beams strengthened with NSM-steel technique

  • Md. Akter Hosen (Department of Civil and Environmental Engineering, College of Engineering, Dhofar University) ;
  • Khalid Ahmed Al Kaaf (Department of Civil and Environmental Engineering, College of Engineering, Dhofar University) ;
  • A.B.M. Saiful Islam (Department of Civil & Construction Engineering, Imam Abdulrahman Bin Faisal University) ;
  • Mohd Zamin Jumaat (Department of Civil Engineering, Faculty of Engineering, University of Malaya) ;
  • Zaheer Abbas Kazmi (Department of Civil & Construction Engineering, Imam Abdulrahman Bin Faisal University)
  • 투고 : 2016.10.18
  • 심사 : 2023.04.27
  • 발행 : 2023.10.10

초록

The reinforced concrete (RC) structures might need strengthening or upgradation due to adverse environmental conditions, design defects, modification requirements, and to prolong the expected lifespan. The RC beams have been efficiently strengthened using the near surface mounted (NSM) approach over the externally bonded reinforcing (EBR) system. In this study, the performance of RC beam elements strengthened with NSM-steel rebars was investigated using an experimental program and nonlinear finite element modeling (FEM). Nine medium-sized, rectangular cross-section RC beams total in number made up for the experimental evaluation. The beams strengthened with varying percentages of NSM reinforcement, and the number of grooves was assessed in four-point bending experiments up to failure. Based on the experimental evaluation, the load-displacement response, crack features, and failure modes of the strengthened beams were recorded and considered. According to the experimental findings, NSM steel greatly improved the flexural strength (up to about 84%) and stiffness of RC beams. The flexural response of the tested beams was simulated using a 3D non-linear finite element (FE) model. The findings of the experiments and the numerical analysis showed good agreement. The effect of the NSM groove and reinforcement on the structural response was then assessed parametrically.

키워드

과제정보

The authors express their appreciation for the monetary assistance provided by the University of Malaya High Impact Research Grant, which was assigned Account No UM.C/HIR/MOHE/ENG/36.

참고문헌

  1. Akbarzadeh, H. and Maghsoudi, A. (2010), "Experimental and analytical investigation of reinforced high strength concrete continuous beams strengthened with fiber reinforced polymer", Mater. Des., 31(3), 1130-1147. https://doi.org/10.1016/j.matdes.2009.09.041.
  2. Al-Mahmoud, F., Castel, A., Francois, R. and Tourneur, C. (2009), "Strengthening of RC members with near-surface mounted CFRP rods", Compos. Struct., 91(2), 138-147. https://doi.org/10.1016/j.compstruct.2009.04.040.
  3. Almusallam, T.H., Elsanadedy, H.M., Al-Salloum, Y.A. and Alsayed, S.H. (2013), "Experimental and numerical investigation for the flexural strengthening of RC beams using near-surface mounted steel or GFRP bars", Constr. Build. Mater., 40, 145-161. https://doi.org/10.1016/j.conbuildmat.2012.09.107.
  4. Asplund, S.O. (1949), "Strengthening bridge slabs with grouted reinforcement", J. Proc., 45(1), 397-406.
  5. Badawi, M. and Soudki, K. (2009), "Flexural strengthening of RC beams with prestressed NSM CFRP rods-experimental and analytical investigation", Constr. Build. Mater., 23(10), 3292-3300. https://doi.org/10.1016/j.conbuildmat.2009.03.005.
  6. Bakis, C.E., Ganjehlou, A., Kachlakev, D.I., Schupack, M., Balaguru, P., Gee, D.J., ... & Busel, J.P. (2002), "Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures", Reported by ACI Committee, 440, 2R-1
  7. Barris, C., Baena, M., Jahani, Y., Codina, A. and Torres, L. (2023), "Experimental study on flexural cracking and deformation of reinforced-concrete beams strengthened with NSM FRP reinforcement", J. Compos. Constr., 27(2), 04023006. https://doi.org/10.1061/JCCOF2.CCENG-3907.
  8. Barros, J.A., Dias, S.J. and Lima, J.L. (2007), "Efficacy of CFRP-based techniques for the flexural and shear strengthening of concrete beams", Cement Concrete Compos., 29(3), 203-217. https://doi.org/10.1016/j.cemconcomp.2006.09.001.
  9. Barros, J.A. and Kotynia, R. (2008), "Possibilities and challenges of NSM for the flexural strengthening of RC structures", 4th International Conference on FRP Composites in Civil Engineering (CICE2008), Zurich, Switzerland.
  10. Blaschko, M. and Zilch, K. (1999), "Rehabilitation of concrete structures with CFRP strips glued into slits", Proceedings of the 12th International Conference on Composite Materials, May.
  11. Brena, S.F., Bramblett, R.M., Wood, S.L. and Kreger, M.E. (2003), "Increasing flexural capacity of reinforced concrete beams using carbon fiber-reinforced polymer composites", ACI Struct. J., 100(1), 36-46.
  12. Committee, A. (2011), Building Code Requirements for Structural Concrete (318-11) and Commentary-(318R-11), Detroit Mich. Am. Concr. Inst.
  13. De Lorenzis, L., Nanni, A. and La Tegola, A. (2000), "Strengthening of reinforced concrete structures with near surface mounted FRP rods", International Meeting on Composite Materials, PLAST 2000, Proceedings, Advancing with Composites.
  14. De Lorenzis, L. and Teng, J. (2007), "Near-surface mounted FRP reinforcement: An emerging technique for strengthening structures", Compos. Part B: Eng., 38(2), 119-143. https://doi.org/10.1016/j.compositesb.2006.08.003.
  15. Desayi, P. and Krishnan, S. (1964), "Equation for the stress-strain curve of concrete", ACI J. Proc., 61(3), 345-350.
  16. Dhadiwal, A.J. and Rajak, T.K. (2023), "Near surface mounting technology with glass fibre reinforced polymer and sisal rope fibre for flexural strengthening of reinforced concrete beams", Mater. Today: Proc., 74, 836-842. https://doi.org/10.1016/j.matpr.2022.11.207.
  17. El-Hacha, R. and Gaafar, M. (2011), "Flexural strengthening of reinforced concrete beams using prestressed, near-surface-mounted CFRP bars", PCI J., 56(4), 134-151. https://doi.org/10.15554/pcij.09012011.134.151
  18. El-Hacha, R. and Rizkalla, S.H. (2004), "Near-surface-mounted fiber-reinforced polymer reinforcements for flexural strengthening of concrete structures", ACI Struct. J., 101(5), 717-726.
  19. Elshetry, H.S.A.S. (2008), Performance of RC Beams Strengthened by Different Methods, Zagazig University.
  20. Garrity, S. (2001), "Near-surface reinforcement of masonry arch highway bridges", Proceedings of the 9th Canadian Masonry Symposium, June.
  21. Gholami, M., Sam, A.R.M., Yatim, J.M. and Tahir, M.M. (2013), "A review on steel/CFRP strengthening systems focusing environmental performance", Constr. Build. Mater., 47, 301-310. https://doi.org/10.1016/j.conbuildmat.2013.04.049.
  22. Hawileh, R.A. (2012), "Nonlinear finite element modeling of RC beams strengthened with NSM FRP rods", Constr. Build. Mater., 27(1), 461-471. https://doi.org/10.1016/j.conbuildmat.2011.07.018.
  23. Hawileh, R.A., Rasheed, H.A., Abdalla, J.A. and Al-Tamimi, A.K. (2014), "Behavior of reinforced concrete beams strengthened with externally bonded hybrid fiber reinforced polymer systems", Mater. Des., 53, 972-982. https://doi.org/10.1016/j.matdes.2013.07.087.
  24. Hibbitt, K. (2007), ABAQUS Version 6. 7: Theory Manual, Users' Manual, Verification Manual and Example Problems Manual, Hibbitt, Karlson and Sorenson Inc.
  25. Hildebrand, M. (1994), "Non-linear analysis and optimization of adhesively bonded single lap joints between fibre-reinforced plastics and metals", Int. J. Adhes. Adhesiv., 14(4), 261-267. https://doi.org/10.1016/0143-7496(94)90039-6.
  26. Hosen, M.A., Althoey, F., Jumaat, M.Z., Alengaram, U.J. and Sulong, N.R. (2021), "Flexural performance of RC beams strengthened with externally-side bonded reinforcement (E-SBR) technique using CFRP composites", Mater., 14(11), 2809. https://doi.org/10.3390/ma14112809.
  27. Hosen, M.A., Jumaat, M.Z., Alengaram, U.J., Islam, A. and Bin Hashim, H. (2016), "Near surface mounted composites for flexural strengthening of reinforced concrete beams", Polym., 8(3), 67. https://doi.org/10.3390/polym8030067.
  28. Hosen, M.A., Jumaat, M.Z., Alengaram, U.J. and Sulong, N.R. (2018), "CFRP strips for enhancing flexural performance of RC beams by SNSM strengthening technique", Constr. Build. Mater., 165, 28-44. https://doi.org/10.1016/j.conbuildmat.2017.12.052.
  29. Hosen, M.A., Jumaat, M.Z., Alengaram, U.J., Sulong, N.R. and Islam, A.S. (2019), "Structural performance of lightweight concrete beams strengthened with side-externally bonded reinforcement (S-EBR) technique using CFRP fabrics", Compos. Part B: Eng., 176, 107323. https://doi.org/10.1016/j.compositesb.2019.107323.
  30. Hosen, M.A., Jumaat, M.Z., Islam, A.S., Al Kaaf, K.A., Shammas, M.I., Hakeem, I.Y. and Islam, M.M.U. (2023), "Potential side-NSM strengthening approach to enhance the flexural performance of RC beams: Experimental, numerical and analytical investigations", Struct. Eng. Mech., 85(2), 179. https://doi.org/10.12989/sem.2023.85.2.179.
  31. Hu, H.T., Lin, F.M. and Jan, Y.Y. (2004), "Nonlinear finite element analysis of reinforced concrete beams strengthened by fiber-reinforced plastics", Compos. Struct., 63(3), 271-281. https://doi.org/10.1016/S0263-8223(03)00174-0.
  32. Hu, H.T. and Schnobrich, W. (1991), "Nonlinear finite element analysis of reinforced concrete plates and shells under monotonic loading", Compos. Struct., 38(5-6), 637-651. https://doi.org/10.1016/0045-7949(91)90015-E.
  33. Huang, J., Xing, G. and Chang, Z. (2023), "Experimental and numerical investigation on flexural behavior of concrete beams strengthened by different NSM tendons", Compos. Struct., 116947. https://doi.org/10.1016/j.compstruct.2023.116947.
  34. Kupfer, H., Hilsdorf, H.K. and Rusch, H. (1969), "Behavior of concrete under biaxial stresses", ACI J. Proc., 66(8), 656-666.
  35. Ma, G., Wu, C. and Liu, K. (2023), "Seismic performance of lap-spliced pre-damaged and intact concrete columns strengthened or retrofitted with UHPC and NSM", Eng. Struct., 277, 115431. https://doi.org/10.1016/j.engstruct.2022.115431.
  36. Nguyen, D.M., Chan, T.K. and Cheong, H.K. (2001), "Brittle failure and bond development length of CFRP-concrete beams", J. Compos. Constr., 5(1), 12-17. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:1(12).
  37. Nilson, A.H. (1982), "State-of-the-art report on finite element analysis of reinforced concrete", Task Committee on Finite Element Analysis of Reinforced Concrete Structures of the Structural Division Committee on Concrete and Masonry Structures, ASCE, New York, NY.
  38. Ortiz, J.D., Khedmatgozar Dolati, S.S., Malla, P., Nanni, A. and Mehrabi, A. (2023), "FRP-reinforced/strengthened concrete: state-of-the-art review on durability and mechanical effects", Mater., 16(5), 1990. https://doi.org/10.3390/ma16051990.
  39. Qasim, M., Lee, C. and Zhang, Y. (2023), "Flexural strengthening of reinforced concrete beams using hybrid fibre reinforced engineered cementitious composite", Eng. Struct., 284, 115992. https://doi.org/10.1016/j.engstruct.2023.115992.
  40. Qiang, X., Chen, L. and Jiang, X. (2023), "Experimental and theoretical study on flexural behavior of steel-concrete composite beams strengthened by CFRP plates with unbonded retrofit systems", Compos. Struct., 309, 116763. https://doi.org/10.1016/j.compstruct.2023.116763.
  41. Rahal, K.N. and Rumaih, H.A. (2011), "Tests on reinforced concrete beams strengthened in shear using near surface mounted CFRP and steel bars", Eng. Struct., 33(1), 53-62. https://doi.org/10.1016/j.engstruct.2010.09.017.
  42. Sabzi, J., Esfahani, M.R. and Ramezani, A. (2023), "The effect of tensile reinforcement on the behavior of CFRP strengthened reinforced concrete beams: An experimental and analytical study", Steel Compos. Struct., 46(1), 115-132. https://doi.org/10.12989/scs.2023.46.1.115.
  43. Sheet, S.P.D. (2022), Sikadur-30: Two-Part Epoxy Adhesive for Bonding Reinforcement, Sika Construction Chemicals.
  44. Skuturna, T. and Valivonis, J. (2015), "The statistical evaluation of design methods of the load-carrying capacity of flexural reinforced concrete elements strengthened with FRP", Arch. Civil Mech. Eng., 15(1), 214-222. https://doi.org/10.1016/j.acme.2014.04.005.
  45. Soliman, S.M., El-Salakawy, E. and Benmokrane, B. (2010), "Flexural behaviour of concrete beams strengthened with near surface mounted fibre reinforced polymer bars", Can. J. Civil Eng., 37(10), 1371-1382. https://doi.org/10.1139/L10-077.
  46. Teychenne, D.C., Franklin, R.E., Erntroy, H.C., Nicholls, J., Hobbs, D. and MARSH, D. (1997), Design of Normal Concrete Mixes, Building Research Establishment Ltd., Garston, Watford UK.
  47. Zhou, Y., Gou, M., Zhang, F., Zhang, S. and Wang, D. (2013), "Reinforced concrete beams strengthened with carbon fiber reinforced polymer by friction hybrid bond technique: Experimental investigation", Mater. Des., 50, 130-139. https://doi.org/10.1016/j.matdes.2013.02.089.