Acknowledgement
This research was supported by the Ministry of Trade, Industry, and Energy Grant funded by the Korean Government [Project Number 20011366].
References
- 2022 Seismological Annual Report, Korea Meteorological Administration.
- G. P. Warn and K. L. Ryan, "A review of seismic isolation for buildings: historical development and research needs", Buildings, 2, 300 (2012).
- C. Chovino and P. Gramain, "Influence of the Conformation on Chemical Modification of Polymers: Study of the Quarternization of Poly(4-vinylpyridine)", Macromolecules, 31, 7111 (1998).
- E. J. Wang, J. S. Yoon, C. S. Yoo, and N. C. Paik, "Modification of Styrene-Butadiene-Styrene Block Copolymer and the Proper ties of Graft Products", Elast. Compos., 25, 273 (1990).
- S. I. Joo, H. C. Cho, S. H. Lee, and S. C. Hong, "Modification of Rubbers through Chemical Reactions including Controlled/"living" Radical Polymerization Techniques", Elast. Compos., 44, 122 (2009).
- Smith, Brian. "The Infrared Spectra of Polymers IV: Rubbers", Spectroscopy, 37, 1 (2022).
- I. S. Kim, D. Y. Lee, K. S. Sohn, J. H. Lee, and J. W. Bae, "Characterization on the Ozone Oxidation of Raw Natural Rubber Thin Film using Image and FT-IR Analysis", Elast. Compos., 54, 110 (2019).
- M. Jeria-Orell, G. del C. Pizarro, O. G. Marambio, K. E. Geckeler, "Novel Hydrogels based on Itaconic Acid and Citraconic Acid: Synthesis, Metal Ion Binding, and Swelling Behavior", J. Appl. Polym. Sci., 113, Issue1 104 (2009).
- J. S. Kim, J. W. Bae, J. H. Lee, G. N. Kim, S. T. Oh, Y. H. Lee, and H. D. Kim, "Melt grafting of citraconic acid onto an ethylene-propylene-diene terpolymer (EPDM) -Effect of reaction conditions and initiator type on the melt grafting of citraconic ccid onto EPDM", Elast. Compos., 48, 39 (2013).
- Poschl, S. G. Sathi, R. Stocek, and O. Kratina, "Rheometer Evidences for the Co-Curing Effect of a Bismaleimide in Conjunction with the Accelerated Sulfur on Natural Rubber/Chloroprene Rubber Blends", Polymers, 13, 1510 (2021).
- M. Setyadewi1, I. N. Indrajati1, and N. Darmawan, "Mechanical Properties and Curing Characteristics of Shape Memory Natural Rubber", International Seminar on Metallurgy and Materials, IOP Conf. Series: Mater. Sci. Eng., 541 (2019).
- C. Choi, W. K. Lee, and C. Y. Park, "Cure Characteristics, Mechanical Property and Ozone Resistance of Natural Rubber/Bromo Isobutylene Isoprene Rubber Blend", Elast. Compos., 53, 168 (2018).
- A. Ansarifar, L. Wang, R. J. Ellis, S. P. Kirtley, and N. Riyazuddin, "Enhancing the mechanical properties of styrene-butadiene rubber by optimizing the chemical bonding between silanized silica nanofiller and the rubber", J. Appl. Polym. Sci., 105, 322 (2007).
- S. Shin, et al. "Improved Silica Dispersibility in Silica-rubber Compounds for a Tire Tread by Using an Itaconic Acid-based Polymeric Dispersant", Fibers Polym., 22, 196 (2021).
- J. S. Yu and S. H. Lee, "Adhesion and Adhesion Mechanism", J. Adhes. Inter., 1, 63 (2000).
- K. T. Han, "Adhesives on automobile", Polym. Sci. Technol., 6, 568 (1995).