과제정보
This research was supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (MOE) (NRF-2022R1I1A3068558).
참고문헌
- Ao, L. and D. -Y. Wang(2016), Ultimate Torsional Strength of Cracked Stiffened Box Girders with a Large Deck Opening, International Journal of Naval Architecture and Ocean Engineering, Vol. 8, pp. 360-374. https://doi.org/10.1016/j.ijnaoe.2016.04.002
- Dow, R. S.(1991), Testing and Analysis of a 1/3-Scale Welded Steel Frigate Model, Proceedings of International Conference on Advances in Marine Structures, Dunfermline Scotland, pp. 749-773.
- Gordo J. M. and C. Guedes Soares(2009), Tests on Ultimate Strength of Hull Box Girders made of High Tensile Steel, Marine Structures, Vol. 22, Issue 4, pp. 770-790. https://doi.org/10.1016/j.marstruc.2009.07.002
- Hu, K., P. Yang, T. Xia, and Z. Peng(2018), Residual Ultimate Strength of Large Opening Box Girder with Crack Damage under Torsion and Bending Loads, Ocean Engineering, Vol. 162, Issue 15, pp. 274-289. https://doi.org/10.1016/j.oceaneng.2018.05.024
- IACS(2020), Common Structural Rules for Bulk Carriers and Oil Tankers, Chapter 5-Hull Girder Strength, Section 2, pp. 342-347.
- Lee, H. G. and J. S. Lee(2006), On the Ultimate Longitudinal Strength Assessment of Ship's Hull Structure, Journal of the Society of Naval Architects of Korea, Vol. 43, No. 3, pp. 340-350. https://doi.org/10.3744/SNAK.2006.43.3.340
- MSC Software(2012), Patran 2012 User's Guide, Chapter 6-, Material modeling, pp. 125-136.
- Paik, J. K. and A. K. Thayamballi(1997), An Empirical Formulation for Predicting Ultimate Compressive Strength of Stiffened Panels, 7th International Offshore and Polar Engineering Conference, Honolulu, USA, Vol. 4, pp. 328-338.
- Paik, J. K., B. J. Kim, and J. K. Seo(2008), Methods for Ultimate Limit State Assessment of Ships and Ship-shaped Offshore Structures : Part 3 Hull Girders, Ocean Engineering, Vol. 35, Issue 2, pp. 281-286. https://doi.org/10.1016/j.oceaneng.2007.08.008
- Quispe, J. P., S. F. Estefen, Marcelo Igor Lourenco de Souza, J. H. Chujutalli, Diogo do Amaral M. Amante, and T. Gurova (2022), Numerical and Experimental Analyses of Ultimate Longitudinal Strength of a Small-scale Hull Box Girder, Marine Structures, Vol. 85, pp. 26-32.
- Saad-Eldeen, S., Y. Garbatov, and C. Guedes Soares(2010), Experimental Assessment of the Ultimate Strength of a Box Girder Subjected to Four-Point Bending Moment, 11th International Symposium on Practical Design of Ships and Other Floating Structures, pp. 1134-1143.
- Smith, C. S.(1976), Compressive Strength of Welded Steel Ship Grillages, RINA Transactions, Vol. 118, pp. 325-359.
- Smith, C. S.(1977), Influence of Local Compressive Failure on Ultimate Longitudinal Strength of A Ship's Hull, Proceedings of 3rd International Symposium on Practical Design in shipbuilding, Tokyo, pp. 73-79.
- Zhong, Q. and D. Wang(2022), Numerical Investigation on Ultimate Strength of Sandwich Box Girders under Vertical Bending and Torsion, Ocean Engineering, Vol. 254, No. 15, pp. 125-132.