Journal of the Korean Society of Marine Environment & Safety (해양환경안전학회지)

The Korean Society of Marine Environment and safety (해양환경안전학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Numerical Analysis Methods for Predicting Strength Test Result of Box Girder under Bending Moment

휨 모멘트를 받는 박스거더 구조 강도 실험에 대한 수치해석 방법에 관한 연구

  • Myung-Su Yi (Department of Naval Architecture and Ocean Engineering, Chosun University) ;
  • Joo-Shin Park (Ship and Offshore Research Institutes, Samsung heavy industries)
  • 이명수 (조선대학교 선박해양공학과) ;
  • 박주신 (삼성중공업 조선해양연구소)
  • Received : 2023.05.23
  • Accepted : 2023.08.29
  • Published : 2023.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

Ship and bridge structures are a type of long box-shaped structure, and resistance to vertical bending moment is a key factor in their structural design. In particular, because box girders are repeatedly exposed to irregular wave loads for a long time, the continuous collapse behavior of structural members must be accurately predicted. In this study, plastic collapse behavior, including buckling according to load changes of the box girder receiving pure bending moments, was analyzed using a numerical analysis method. The analysis targets were selected as three box girders used in the Gordo experiment. The cause of the difference was considered by comparing the results of the structural strength experiment with those of non-linear finite element analysis. This study proposed a combination of the entire and local sagging shape to reflect the effect of the initial sagging caused by welding heat that is inevitably used to manufacture carbon steel materials. The procedures reviewed in the study and the contents of the initial sagging configuration can be used as a good guide for analyzing the final strength of similar structures in the future.

선박 및 교량 구조물은 일종의 길이가 긴 박스형 구조로서 수직 굽힘 모멘트에 대한 저항력이 설계의 주요 인자이다. 특히 선박 거더는 반복적으로 불규칙적인 파랑하중에 장시간 노출되어 있기 때문에 구조부재의 연속 붕괴 거동을 정확하게 예측하는 것이 무엇보다도 중요하다. 본 논문에서는 순수 휨모멘트를 받는 박스거더의 하중 변화에 따른 좌굴을 포함한 소성 붕괴 거동을 수치해석적 방법을 이용하여 분석하였다. 분석대상은 Gordo 실험에서 사용한 세 가지 박스거더로 선정하였다. 구조강도 실험 결과와 비선형 유한요소해석에 의한 결과를 비교하여 차이가 발생하는 원인에 대해서 고찰하였다. 본 논문에서는 카본스틸 재료의 제작 시 필연적으로 사용하는 용접열에 의한 초기 처짐의 영향을 반영하기 위하여 전체와 국부적인 처짐 형상의 조합을 제안하였고, 이 결과는 실험 결과와 거동 및 최종강도 추정율이 7% 이내에서 잘 일치하고 있었다. 논문에서 검토한 절차 및 초기 처짐 구성에 대한 내용은 향후 유사 구조물의 최종강도를 분석하는데 좋은 지침으로 사용할 수 있다.

Keywords

Acknowledgement

This research was supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (MOE) (NRF-2022R1I1A3068558).

References

  1. Ao, L. and D. -Y. Wang(2016), Ultimate Torsional Strength of Cracked Stiffened Box Girders with a Large Deck Opening, International Journal of Naval Architecture and Ocean Engineering, Vol. 8, pp. 360-374. https://doi.org/10.1016/j.ijnaoe.2016.04.002
  2. Dow, R. S.(1991), Testing and Analysis of a 1/3-Scale Welded Steel Frigate Model, Proceedings of International Conference on Advances in Marine Structures, Dunfermline Scotland, pp. 749-773.
  3. Gordo J. M. and C. Guedes Soares(2009), Tests on Ultimate Strength of Hull Box Girders made of High Tensile Steel, Marine Structures, Vol. 22, Issue 4, pp. 770-790. https://doi.org/10.1016/j.marstruc.2009.07.002
  4. Hu, K., P. Yang, T. Xia, and Z. Peng(2018), Residual Ultimate Strength of Large Opening Box Girder with Crack Damage under Torsion and Bending Loads, Ocean Engineering, Vol. 162, Issue 15, pp. 274-289. https://doi.org/10.1016/j.oceaneng.2018.05.024
  5. IACS(2020), Common Structural Rules for Bulk Carriers and Oil Tankers, Chapter 5-Hull Girder Strength, Section 2, pp. 342-347.
  6. Lee, H. G. and J. S. Lee(2006), On the Ultimate Longitudinal Strength Assessment of Ship's Hull Structure, Journal of the Society of Naval Architects of Korea, Vol. 43, No. 3, pp. 340-350. https://doi.org/10.3744/SNAK.2006.43.3.340
  7. MSC Software(2012), Patran 2012 User's Guide, Chapter 6-, Material modeling, pp. 125-136.
  8. Paik, J. K. and A. K. Thayamballi(1997), An Empirical Formulation for Predicting Ultimate Compressive Strength of Stiffened Panels, 7th International Offshore and Polar Engineering Conference, Honolulu, USA, Vol. 4, pp. 328-338.
  9. Paik, J. K., B. J. Kim, and J. K. Seo(2008), Methods for Ultimate Limit State Assessment of Ships and Ship-shaped Offshore Structures : Part 3 Hull Girders, Ocean Engineering, Vol. 35, Issue 2, pp. 281-286. https://doi.org/10.1016/j.oceaneng.2007.08.008
  10. Quispe, J. P., S. F. Estefen, Marcelo Igor Lourenco de Souza, J. H. Chujutalli, Diogo do Amaral M. Amante, and T. Gurova (2022), Numerical and Experimental Analyses of Ultimate Longitudinal Strength of a Small-scale Hull Box Girder, Marine Structures, Vol. 85, pp. 26-32.
  11. Saad-Eldeen, S., Y. Garbatov, and C. Guedes Soares(2010), Experimental Assessment of the Ultimate Strength of a Box Girder Subjected to Four-Point Bending Moment, 11th International Symposium on Practical Design of Ships and Other Floating Structures, pp. 1134-1143.
  12. Smith, C. S.(1976), Compressive Strength of Welded Steel Ship Grillages, RINA Transactions, Vol. 118, pp. 325-359.
  13. Smith, C. S.(1977), Influence of Local Compressive Failure on Ultimate Longitudinal Strength of A Ship's Hull, Proceedings of 3rd International Symposium on Practical Design in shipbuilding, Tokyo, pp. 73-79.
  14. Zhong, Q. and D. Wang(2022), Numerical Investigation on Ultimate Strength of Sandwich Box Girders under Vertical Bending and Torsion, Ocean Engineering, Vol. 254, No. 15, pp. 125-132.