Journal of Drive and Control (드라이브 ㆍ 컨트롤)

The Korean Society for Fluid Power and Construction Equipment (유공압건설기계학회)
권호 표지
DOI QR코드

DOI QR Code

Development of a multi-purpose driving platform for Radish and Chinese cabbage harvester

무·배추 수확 작업을 위한 다목적 주행플랫폼 개발

  • H. N. Lee (Heemang Corporation) ;
  • Y. J. Kim (Department of Smart Agriculture Systems, Chungnam National University)
  • 이해나 ;
  • 김용주
  • Received : 2023.08.14
  • Accepted : 2023.08.28
  • Published : 2023.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

Radish and Chinese cabbage are the most produced and consumed vegetables in Korea. The mechanization of harvesting operations is necessary to minimize the need for manual labor. This study to develop and evaluate the performance of a multi-purpose driving platform that can apply modular Radish and Chinese cabbage harvesting devices. The multi-purpose driving platform consisted of driving, device control, engine, hydraulic, harvesting, conveying, and loading part. Radish and Chinese cabbage harvesting conducted using the multi-purpose driving platform each harvesting module. The performance of the multi-purpose driving platform was evaluated the field efficiency and loss rate. The total Radish harvesting operation time 34.3 min., including 28.8 min., of harvesting time, 1.9 min., of turning time, and 3.6 min., of replacement time of bulk bag. During Radish harvesting, the field efficiency and average loss rate of the multi-purpose driving platform were 2.0 hr/10a and 3.1 %. Chinese cabbage harvesting operation 49.3 min., including 26.6 min., of harvesting time, 4.6 min., of turning time, and 18.1 min., of replacement time of bulk bag. During Chinese cabbage harvesting, the field efficiency and average loss rate of the multi-purpose driving platform 2.1 hr/10a and 0.1 %. Performance evaluation of the multi-purpose driving platform that harvesting work was possible by installing Radish and Chinese cabbage harvest modules. Performance analysis through harvest performance evaluation in various Radish and Chinese cabbage cultivation environments is necessary.

Keywords

Acknowledgement

본 연구는 농림수산식품기술기획평가원의 기술사업화지원사업(과제번호:821053-03) 지원으로 수행되었음.

References

  1. KOSIS, "Farm products mechanization rate", Daejeon, 2021.
  2. KOSIS, "Rice paddies mechanization rate", Daejeon, 2021.
  3. RDA, "Agricultural work schedule, Radish", Wanju, 2007.
  4. RDA, "Agricultural Technology guide, Radish", Wanju, 2020.
  5. RDA, "Agricultural work schedule, Chinese cabbage", Wanju, 2007.
  6. RDA, "Agricultural Technology guide, Chinese cabbage", Wanju, 2020.
  7. KOSIS, "Vegetable production(root)", Daejeon, 2021.
  8. KOSIS, "Vegetable production(leaf)", Daejeon, 2021.
  9. KOSIS, "Direct labor volume by crop and livestock species", Daejeon, 2017.
  10. Y. Choi, et al., "Development of Harvester for Radish and Carrot", Journal of Korean Society for Agricultural Machinery, Vol.1998, No.1, pp. 49-55, 1998.
  11. J. T. Hong, et al., "Development of Chinese Cabbage Harvester (I): A Fundamental Study for Development a Chinese Cabbage Harvester" Journal of Korean Society for Agricultural Machinery, Vol.2000, No.1, pp. 59-66, 2000.
  12. D. K. Noh, et al., "Analysis of Surplus Flow in a Hydraulic System Applied to a Self-propelled Spinach Harvester", Journal of Drive and Control, Vol.19, No.1, pp. 26-33, 2022. https://doi.org/10.7839/KSFC.2022.19.1.026
  13. H. H. Jeon, et al., "Development and Validation of Simulation Model for Traction Power and Driving Torque Prediction of Upland Multipurpose Platform", Journal of Drive and Control, Vol.20, No.1, pp. 16-26, 2023. https://doi.org/10.7839/KSFC.2023.20.1.016
  14. S. E. Lee, et al., "Analysis of Engine Load Factor for Agricultural Cultivator during Plow and Rotary Tillage Operation", Journal of Drive and Control, Vol.20, No.2, pp. 31-39. 2023. https://doi.org/10.7839/KSFC.2023.20.2.031
  15. J. K. Woo, et al., "Design and Performance Evaluation of a Variable Control Type Fresh Corn Harvester", Journal of Drive and Control, Vol.20, No.2, pp. 40-46, 2023. https://doi.org/10.7839/KSFC.2023.20.2.040
  16. Chanchal Gupta & V. K. Tewari & Rajendra Machavaram, "Evaluation of a Laboratory-based Prototype of a Comb-type Picking Mechanism for Chili Pepper Harvester", Journal of Biosystems Engineering, Vol.47, No.1, pp.69-78, 2022. https://doi.org/10.1007/s42853-022-00128-y
  17. Vinod Choudhary & Rajendra Machavaram, "Need of Automation in Paddy Nurseries for Raising Paddy Seedlings in India: a Review", Journal of Biosystems Engineering, Vol.47, No.2, pp.209-222, 2022. https://doi.org/10.1007/s42853-022-00139-9
  18. Young Mo Koo, "PTO Torque and Draft Analyses of an Integrated Tractor-Mounted Implement for Round Ridge Preparation", Journal of Biosystems Engineering, Vol.47, No.3, pp.330-343, 2022. https://doi.org/10.1007/s42853-022-00146-w
  19. H. N. Lee, "Development of a multi-purpose driving platform for Radish and chinese cabbage harvesters" Chungnam National University, Daejeon, 2023.
  20. KOAT, "Test method for agricultural machinery", Iksan, 2020.
  21. KOAT, "Test criteria for agricultural machinery", Iksan, 2023.
  22. KOSIS, "Area of cultivation of open-air vegetables", Daejeon, 2017.