DOI QR코드

DOI QR Code

Test for the influence of socket connection structure on the seismic performance of RC prefabricated bridge piers

  • Yan Han (School of Civil Engineering, North China University of Technology) ;
  • Shicong Ding (The Second Construction Limited Company of China Construction Eighth Engineering Division) ;
  • Yuxiang Qin (School of Civil Engineering, North China University of Technology) ;
  • Shilong Zhang (The Second Construction Limited Company of China Construction Eighth Engineering Division)
  • 투고 : 2023.01.11
  • 심사 : 2023.07.10
  • 발행 : 2023.08.25

초록

In order to obtain the impact of socket connection interface forms and socket gap sizes on the seismic performance of reinforced concrete (RC) socket prefabricated bridge piers, quasi-static tests for three socket prefabricated piers with different column-foundation connection interface forms and reserved socket gap sizes, as well as to the corresponding cast-in-situ reinforced concrete piers, were carried out. The influence of socket connection structure on various seismic performance indexes of socket prefabricated piers was studied by comparing and analyzing the hysteresis curve and skeleton curve obtained through the experiment. Results showed that the ultimate failure mode of the socket prefabricated pier with circumferential corrugated treatment at the connection interface was the closest to that of the monolithic pier, the maximum bearing capacity was slightly less than that of the cast-in-situ pier but larger than that of the socket pier with roughened connection interface, and the displacement ductility and accumulated energy consumption capacity were smaller than those of socket piers with roughened connection interface. The connection interface treatment form had less influence on the residual deformation of socket prefabricated bridge piers. With the increase in the reserved socket gap size between the precast pier column and the precast foundation, the bearing capacity of the prefabricated socket bridge pier component, as well as the ductility and residual displacement of the component, would be reduced and had unfavorable effect on the energy dissipation property of the bridge pier component.

키워드

과제정보

The research described in this paper was financially supported by the National Science Foundation of China (Grant no. 51878006), the Basic Scientific Research Project of Beijing Science and Technology Innovation Service Capacity Building (Grant no. 110052971921/058), and Beijing Natural Science Foundation (Grant No. 8112013). These supports are sincerely appreciated.

참고문헌

  1. Abdelkarim, O.I., ElGawady, M.A., Gheni, A., Anumolu, S. and Abdulazeez, M. (2017), "Seismic performance of innovative hollow-core FRP-concrete-steel bridge columns", J. Bridge Eng., 22(2), 04016120. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000985.
  2. Abdulazeez, M.M. and ElGawady, M.A. (2017), "Seismic behavior of precast hollow-core FRP-concrete-steel column having socket connection", The Fourth International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures (SMAR2017), Zurich, Switzerland, September.
  3. Canha, R.M.F., EI Debs, de Cresce, A.L.H. and EI Debs, M.K. (2007), "Design model for socket base connections adjusted from experimental results", Struct. Concrete, 8(1), 3-10. https://doi.org/10.1680/stco.2007.8.1.3.
  4. Chen, J.B. (2017), "Study and application on connection performance of prefabricated bridge precast hollow bridge pier and pile cap", M.Sc. Dissertation, Hefei University of Technology, Hefei, China.
  5. Cheng, Z. and Sritharan, S. (2019), "Side shear strength of preformed socket connections suitable for vertical precast members", J. Bridge. Eng., 24(5), 04019025. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001391.
  6. Fahmy, F.M., Moussa, M.A. and Wu, Z.S. (2023), "Precast bridge piers: Construction techniques, structural systems, and seismic response", Adv. Struct. Eng., 26(4), 611-639. https://doi.org/10.1177/13694332221133596.
  7. Han, Y. and Zhou, A.L. (2012), "Seismic performance analysis of HRB400 high-strength reinforced concrete columns", Indust. Constr., 42(10), 58-62. https://doi.org/10.13204/j.gyjz2012.10.017.
  8. Han, Y., Dong, J.W. and Wang, L.L. (2020), "Experimental study on the seismic performance of socket bridge piers", Adv. Civil Eng., 42(5), 1-10. https://doi.org/10.1155/2020/8895196.
  9. Haraldsson, O.S., Janes, T.M., Eberhard, M.O. and Stanton, J.F. (2013), "Seismic resistance of socket connection between footing and precast column", J. Bridge. Eng., 18(9), 910-919. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000413.
  10. Japan Road Association (2002), Specifications for Highway Bridges-Part V: Seismic Design, Maruzen Publishing Co., Ltd., Tokyo, Japan.
  11. Jiang, H.X. and Wei, Z.Z. (2017), "Study on anti-seismic property of socketed precast assembled bridge pier", Urban Road. Bridge. Flood Contr., 31(6), 56-60. https://doi.org/10.16799/j.cnki.csdqyfh.2017.12.016.
  12. JTG/T 2231-01-2020 (2020), Specifications for Seismic Design of Highway Bridges, People's Communications Press, Beijing, China.
  13. Khaleghi, B., Schultz, E., Seguirant, S., Marsh, L., Haraldsson, O., Eberhard, M. and Stanton, J. (2012), "Accelerated bridge construction in Washington State: From research to practice", PCI J., 57(4), 34-49. https://doi.org/10.15554/pcij.09012012.34.49.
  14. Mashal, M. and Palermo A. (2019), "Emulative seismic resistant technology for accelerated bridge construction", Soil Dyn. Earthq. Eng., 124, 197-211. https://doi.org/10.1016/j.soildyn.2018.12.016.
  15. Mashal, M., White, S. and Palermo, A. (2013), "Quasi-static cyclic tests of emulative precast segmental bridge piers (EPSBP)", Proceedings of New Zealand Society for Earthquake Engineering Conference, Auckland, New Zealand, January.
  16. Mohebbi, A., Saiidi, M.S. and Itani, A.M. (2018), "Shake table studies and analysis of a precast two-column bent with advanced materials and pocket connections", J. Bridge Eng., 23(7), 04018046. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001247.
  17. Osanai, Y., Watanabe, F. and Okamoto, S. (1996), "Stress transfer mechanism of socket base connections with precast concrete columns", ACI Struct. J., 93(3), 266-276. https://doi.org/10.14359/9686.
  18. Park, R. (1989), "Evaluation of ductility of structures and structural assemblages from laboratory testing", Bull. N.Z. Nat. Soc. Earthq. Eng., 22(3), 155-166. https://doi.org/10.5459/bnzsee.22.3.155-166.
  19. Stephens, M.T., Berg, L., Lehman, D.E. and Roeder, C.W. (2014), "Seismic design of circular concrete filled tube bridge pier connections for accelerated bridge construction", Structures Congress 2014, Boston, MA, USA, April.
  20. TBJ 107-92 (1992), Technical Rules for Railway Fabricated Small Bridges and Culverts, China Railway Publishing House, Beijing, China.
  21. White, S. (2014), "Controlled damage rocking systems for accelerated bridge construction", M.Sc. Dissertation, University of Canterbury, Christchurch, New Zealand.
  22. Wu, P.P., Zhou, X.W., Wang, Z.T. and Liu, Z.Q. (2020), "Full-scale model quasi-static test for modular pier with socket connection", Bridge Constr., 50(3), 76-80. https://doi.org/10.3969/j.issn.1003-4722.2020.03.012.
  23. Xie, Y.P., Li, Z.B., Du, X.L., Ma, H., Guo, E.W. and Chen L.M. (2013), "Experimental study on size effect of seismic behavior for reinforced concrete columns under low cycle reversed loading", J. Build. Struct., 34(12), 86-93.
  24. Xu, W.D. (2007), "Seismic behavior of concrete columns with high strength steel bar", M.Sc. Dissertation, Tongji University, Shanghai, China.
  25. Xu, Y., Tong, Z.L., Zeng, Z. and Liu, Z.Q. (2021a), "Influence of grout on the mechanical performance of prefabricated assembled socket bridge pier", J. South Chin. Univ. Technol. (Nat. Sci. Ed.), 49(5), 84-91. https://doi.org/10.12141/j.issn.1000-565X.200260.
  26. Xu, Y., Zeng, Z., Ge, J.P. and Wang, Z.Q. (2019), "The minimum reasonable socket depth of precast pier-footing", J. Tongji Univ. (Nat. Sci.), 47(12), 1706-1711. https://doi.org/10.11908/j.issn.0253-374x.2019.12.003.
  27. Xu, Y., Zeng, Z., Wang, Z.Q. and Ge, J.P. (2021b), "Experimental studies of embedment length of precast bridge pier with socket connection to pile cap", Eng. Struct, 233(2), 111906. https://doi.org/10.1016/j.engstruct.2021.111906.
  28. Xu, Y., Zeng, Z., Wang, Z.Q. and Wang, Z.G. (2022), "Review of the state-of-the-art of the configurations and mechanical behaviors of piers with socket connections", Chin. Civil Eng. J, 2023(1), 90-108. https://doi.org/10.15951/j.tmgcxb.21111127.