과제정보
본 논문은 한국생산기술연구원 기관주요사업 "제품생산 유연성 확보를 위한 뿌리공정기술 개발(KITECH EO-23-0008)"의 지원으로 수행한 연구입니다.
참고문헌
- D. Kim, B. Lee, T.-I. Lee, S. Noh, C. Choe, S. Park, and M.-S. Kim, "Power cycling tests under driving ΔTj = 125 ℃ on the Cu clip bonded EV power module", Microelectron. Reliab., 138, 114652 (2022).
- Y. Ma, J. Li, F. Dong, and J. Yu, "Power cycling failure analysis of double side cooled IGBT modules for automotive applications", Microelectron. Reliab., 124, 114282 (2021).
- D. Kim, S. Noh, S. Park and M.-S. Kim, "Thermo-mechanical fatigue induced unexpected strain hardening of Cu clip wiring on transfer-mold type EV power modules", Int. J. Fatigue, 172, 107603 (2023).
- E. Robles, A. Matallana, I. Aretxabaleta, J. Andreu, M. Fernandez, and J. L. Martin, "The role of power device technology in the electric vehicle powertrain", Int. J. Energy Res., 46, 22222 (2022).
- G. Liu, R. Ding, and H. Luo, "Development of 8-inch key processes for insulated-gate bipolar transistor", Engineering, 1, 361 (2015).
- L. M. Selgi and L. Fragapane, "Experimental evaluation of a 600 V super-junction planar PT IGBT prototype - comparison with planar PT and trench gate PT technologies", Proc. 15th European Confence on Power Electronics and Applications (EPE), Lille, IEEE Power Electronics Society (PES) (2013).
- C. Jaeger, A. Pillppou, A. Vellei, J. G. Laven, and A. Hartl, "A new sub-micron trench cell concept in ultrathin wafer technology for next generation 1200 V IGBTs", Proc. 29th International Symposium on Power Semiconductor Devices and ICs (ISPSD), Sapporo, 69 (2017).
- I. Imperiale, R. Baburske, T. Arnold, A. Philippou, E. Griebl, F. Wolter, H. J. Thees, A. Mauder, F. J. Niedernostheide, and C. Sandow, "Opportunities and challenges of a 1200 V IGBT for 5 V gate voltage operation", Proc. 32nd International Symposium on Power Semiconductor Devices and ICs (ISPSD), Virtual, 505 (2020).
- C. H. Van Der Broeck, L. A. Ruppert, R. D. Lorenz and R. W. De Doncker, "Methodology for active thermal cycle reduction of power electronic modules", IEEE Trans. Power Electron, 34, 8213 (2019).
- J. Millan, P. Godignon, X. Perpina, A. Perez-Tomas, and J. Rebollo, "A survey of wide bandgap power semiconductor devices", IEEE Trans. Power Electron, 29, 2155 (2014).
- K. Shenai, "The Figure of merit of a semiconductor power electronics switch", IEEE Trans. Electron Devices, 65, 4216 (2018).
- A. S. Abdelrahman, Z. Erdem, Y. Attia, and M. Z. Youssef, "Wide bandgap devices in electric vehicle converters: A performance survey", Can. J. Electr. Comput. Eng., 41, 45 (2018).
- N. Donato, N. Rouger, J. Pernot, G. Longobardi, and F. Udrea, "Diamond power devices: State of the art, modelling, figures of merit and future perspective", J. Phys. D., 53, 093001 (2020)
- C. J. H. Wort, and R. S. Balmer, "Diamond as an electronic material", Mater. Today, 11, 22 (2008)
- K. Suganuma, "Wide bandgap power semiconductor packaging", pp. 3-7, Elsevier, Duxford, 2018.
- X. She, A. Q. Huang, O. Lucia, and B. Ozpineci, "Review of silicon carbide power devices and their applications", IEEE Trans. Ind. Electron, 64, 8193 (2017).
- V. Soler, M. Cabello, M. Berthou, J. Montserrat, J. Rebollo, P. Godignon, A. Mihaila, M. R. Rogina, A. Rodriguez, and J. Sebastian, "High-voltage 4H-SiC power MOSFETs with boron-doped gate oxide", IEEE Trans. Ind. Electron, 64, 8962 (2017).
- V. Pala, E. Van Brunt, S. H. Ryu, B. Hull, S. Allen, J. Palmour and A. Hefner, "Physics of bipolar, unipolar and intermediate conduction modes in silicon carbide MOSFET body diodes", Proc. 28th International Symposium on Power Semiconductor Devices and ICs (ISPSD), Prague, 227 (2016).
- T. Kimoto, "High-voltage SiC power devices for improved energy efficiency", Proc. Jpn. Acad. Ser. B., 98, 161 (2022).
- B. Benakaprasad, A. M. Eblabla, X. Li, K. G. Crawford and K. Elgaid, "Optimization of ohmic contact for AlGaN/GaN HEMT on low-resistivity silicon", IEEE Trans. Electron Devices, 67, 863 (2020).
- K. J. Chen, O. Haberlen, A. Lidow, C. L. Tsai, T. Ueda, Y. Uemoto, and Y. Wu, "GaN-on-Si power technology: devices and applications", IEEE Trans. Electron Devices, 64, 779 (2017).
- J. Wei, M. Zhang, G. Lyu and K. J. Chen, "GaN integrated bridge circuits on bulk silicon substrate: issues and proposed solution", IEEE J. Electron Devices Soc., 9, 545 (2021).
- S. Han, S. Yang and K. Sheng, "High-voltage and high-ION/IOFF vertical GaN-on-GaN schottky barrier diode with nitridation-based termination", IEEE Electron Device Lett., 39, 572 (2018).
- B. Chatterjee, D. Ji, A. Agarwal, S. H. Chan, S. Chowdhury and S. Choi, "Electro-thermal investigation of GaN vertical trench MOSFETs", IEEE Electron Device Lett., 42, 723 (2021).
- E. Farzana, J. Wang, M. Monavarian, T. Itoh, K. S. Qwah, Z. J. Biegler, K. F. Jorgensen and J. S. Speck, "Over 1 kV vertical GaN-on-GaN p-n diodes with low on-resistance using ammonia molecular beam epitaxy", IEEE Electron Device Lett., 41, 1806 (2020).